Resource

ca_A1-A163.qxd:Layout 1
2/9/11
7:48 PM
Page 1
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 63
PV
MIL-C-26482, Series 2 Connectors
• Intermatable with MIL-C-26482 Series I
• Operating temperature – 55 C to + 200 C
The PV Connector is designed to meet the rugged requirements of MIL-C-26482, Series 2/MIL-C-83723 Series I*, the
specification which delineates the critical requirements of
space-age applications. PV Connectors have been used
extensively on major aerospace programs requiring general-purpose, miniature cylindrical bayonet coupling connectors such as Space Shuttle, Apollo, ATM, OWS
Minuteman, Skylab, Thor-Delta, Titan IIIC and Viking.
4
1
Circular
3
The PV series is an important member of the Universal
Interconnect System (UIS) – the only system that can perform all interconnection missions. This system is adaptable for use with connectors of all shapes and sizes,
including circular and rectangular configurations, standard, miniature, and subminiature sizes. UIS is a rear servicing s system that evolved form the LITTLE CAESAR ®
rear release contact retention assembly, pioneered and
developed by ITT Cannon. Since this time, ITT Cannon,
and its licensees, have supplied to industry over 250 million interconnections utilizing this system.
PV7 connectors are available under numerous industrial
specifications, some of which are listed below:
- CS512089 Jet Propulsion Laboratory
- 40M39569 NASA, George C. Marshall Space Flight
Center
- 81D52 Martin Marietta, Denver Division
- MG414-0365 Rockwell International Space Division
- AC414-0013 Rockwell International Autonetics Division
- STS0003 McDonnell Douglas Astronautics
This connector series is manufactured to accommodate
the following backshells: M85049/31 (MS3416),
M85049/51 (MS3418), and M85049/52 (MS3417).
Backshells are not included with connector and must be
ordered separately. Backshells on page A-67 are Non-MS
type.
2
1. Universal Insertion / Extraction Tool Style – A single, expendable
plastic tool is used for insertion and extraction of both pins and
sockets.
2. Simple, Strong Contact Design – One basic configuration
eliminates undercuts and maximizes bend resistance for
positive contact mating.
Closed-Entry Socket Insert – Hard dielectric socket face of
mating connector has lead-in chambers for positive alignment
of pins and sockets.
3. Interfacial Pin Insert Seal – Universal interconnect permits design
of raised moisture barriers around each pin which mate into
lead-in chambers of hard face sockets insert for individual contact
sealing. Interfacial sealing is never touched by service tools.
4. Superior Contact Stability - Rear Contact Release System (LITTLE
CEASAR contact assembly) features a stamped metal retaining clip
captivated by molded-in shoulders of each contact cavity in the
insulator. A rear-inserted plastic tool expands at tines beyond the
contact shoulder, releasing the contact.
Polarized Backshells – Interlocking teeth on the front of the
backshell and rear portion of the shell allow endbells to be
positioned as desired, eliminating chafing of wire during assembly.
Military Specification Cross Reference
PV7 and MIL-C-26482
(Series 2) Replacement for
MIL-C-26482 (Series 1)
MS3110, MS3120
MS3111, MS3121
MS3112, MS3122
MS3114, MS3124
MS3116, MS3126
NAS1599
NAS 1650, NAS1699
NAS1651, NAS1700
NAS1652, NAS1701
NAS1653, NAS1702
MS Standards
ITT Cannon Prefix
Commercial
Design
MS3470
MS3471
MS3470
MS3474
MS3476
MS3472
MS3475
MIL-C-26482
PV70
PV71
PV70
PV74
PV76
PV72
PV75
MS3470
MS3472
MS3474
MS3476
* NOTE: M83723 series has been superseded by MIL-C-26482 Series 2
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A
A-63
MIL-C-83723*
Slash Sheet
Description
Socket
/1
/7
/1
/5
/13
/3
/43
Pin
/2
/8
/12
/6
/14
/4
/42
Narrow Flange Receptacle
Cable Connecting Receptacle
Narrow Flange Receptacle
Jam Nut Receptacle
Straight Plug
Wide Flange Receptacle
Straight Plug, RFI Shielded
/1
/3
/5
/13
/2
/4
/6
/14
Narrow Flange Receptacle
Wide Flange Receptacle
Jam Nut Receptacle
Straight Plug
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 64
PV
MIL-C-26482, Series 2 Connectors
Performance and Material Specifications
MATERIALS AND FINISHES
A
Description
Material
Finish
Shell
Aluminum alloy per QQ-A-367, QQ-A-591 or QQ-A-225
Electoless nickel per MIL-C-2674, anodized per MIL-A-8625 or olive drab
Insulators
Rigid dielectric
None
Elastometers (grommets, interfacial and O ring seals)
Silicone rubber (ITT Cannon blend) or Fluorosiclicone
None
rubber (ITT Cannon blend)
None
Circular
cadmium over nickel
Contacts
Copper alloy
Gold page per MIL-G-45204
Coupling Nut
Aluminum alloy per QQ-A-591
Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab
Jam Nut (on PV74)
Aluminum alloy per QQ-A-225
Electoless nickel per MIL-C-26074, anodized per MIL-A-8625 or olive drab
cadmium over nickel
cadmium over nickel
ELECTRICAL
Contact Size
Size
Wire
Size
12
14
16
20
20
24
12
16
20
Insulation O. D. Limits, Inch (mm)
min.
max.
.097 (2.46)
.158 (4.01)
.053 (1.53)
.103 (2.62)
.040 (1.02)
.083 (2.11)
Max. Current
for Test (amps)
23
17
13
7.5
7.5
3.0
Potential Drop
(Millivolts at 25º C)
50
45
50
45
55
45
70,000 ft. Altitude
375 Vac rms
500 Vac rms
(25º C)
5000 megohms minimum
5000 megohms minimum
Dielectric Withstanding Voltage (Test Voltage
Service Rating
I
II
Sea Level
1500 Vac rms
2300 Vac rms
How to Order
PV
MS
70
3470
L
L
18
18
-32
-32
P
P
W
W
L
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT TYPE
ALTERNATE INSERT POSITIONS
LESS COMPONENTS
SERIES PREFIX
MS - Complies with MIL-C-26482 Series 2
PV - ITT Cannon interchanceable with
MIL-C-26482, Series 2
SHELL STYLE
ITT Cannon
Part No.
Military
PV70
MS3470
PV71
MS3471
PV72
MS3472
PV74
MS3474
PV75
MS3475
PV76
MS3476
Description
Narrow Flange Receptacle
Cable Connecting Receptacle
Wide Flange Receptacle
Jam Nut Receptacle
Straight Plug, RFI Shielded
Straight Plug
**Consult Factory for availability
CLASS
(PV Series and MS Series)
**A - Fluid resistant, 200ºC, non-conductive
(anodized)
L - Fluid resistant, 200ºC, conductive, finish
(nickel)
W - Corrosive and fluid resistant, 175ºC
(cadmium over nickel)
R - RoHS Compliant Black Zinc Cobalt
(PV Series Only)
SHELL SIZE
8, 10, 12, 14, 16, 18, 20, 22, and 24
(Size 8 available in PV70 & 76 only)
CONTACT ARRANGEMENTS
See page A-69
CONTACT TYPE
P - Pin contact
S - Socket contact
A - Less pin contact* (MS only)
B - Less socket contacts* (MS only)
* The “A” and “B” designators are used only when other
than power contacts are to be installed (i. e. shielded,
coaxial and thermocouple contacts)
ALTERNATE INSERT POSITIONS
No designation required for normal position.
Standard MS alternate positions available.
LESS COMPONENTS
Use “L” if PV connectors are ordered less
contacts, sealing plugs and insertion/extraction
tool (“L” is not stamped on connectors). To order
MS connectors less contacts, purchase order
must state less contacts.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-64
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 65
PV
MIL-C-26482, Series 2 Connectors
Narrow Flange Receptacle
MS3470
4 HOLES .125/.115 (3.18/2.92) DIA.SIZES 10-22
.152/.142 (3.86/3.61) DIA SIZE 24 ONLY
PV70
POLARIZING
GROOVE
B
F
DIA
B
Max.
.462 (11.73)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.587 (14.91)
.587 (14.91)
.620 (15.75)
J
G
.130/.190
(3.30/4.83)
K
(TYP)
(TP)
.140 RAD
MAX
F
Max.
.474 (12.04)
.594 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
G
Max.
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.275 (32.40)
1.275 (32.40)
1.275 (32.40)
J
Max.
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.110 (2.79)
.110 (2.79)
.110 (2.79)
K
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
L
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
U Thread
UNEF
Class 2A
1/2-20
5/8-24
3/4-20
7/8-20
1-20
1 1/16-18
1 3/16-18
1 5/16-18
1 7/16-18
Cable Connecting Receptacle
MS3471
PV71
B
POLARIZING
GROOVE
J
R DIA.
MAX
V THD
A
DIA
W
S MAX
(TYP)
Shell
Size
10
12
14
16
18
20
22
24
A
Max.
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
B
Max.
.462 (11.73)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.462 (11.73)
.587 (14.91)
.587 (14.91)
.620 (15.75)
J
Max.
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.110 (2.79)
.110 (2.79)
.110 (2.79)
R Dia.
Max.
1.082 (27.48)
1.176 (29.87)
1.270 (32.26)
1.364 (34.64)
1.458 (37.03)
1.708 (43.38)
1.708 (43.38)
1.832 (46.53)
.130/.190
(3.30/4.83)
S
Max.
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.578 (40.08)
1.578 (40.08)
1.703 (43.26)
W
Max.
1.215 (30.86)
1.215 (30.86)
1.215 (30.86)
1.215 (30.86)
1.215 (30.86)
1.275 (32.38)
1.275 (32.38)
1.275 (32.38)
V Thread
UNEF
Class 2A
5/8-24
3/4-20
7/8-20
1-20
1 1/16-18
1 3/16-18
1 5/16-18
1 7/16-18
ER REF.
EC REF.
ES REF.
Receptacle Assembly with Backshell
FS
GR
REF.
TYPE R
TYPE C
TYPE S
HR
Backshell Assemblies not supplied with MS connectors
Shell
Size
10
12
14
16
18
20
22
24
TYPE C
Ec
Max.
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.552 (39.42)
1.552 (39.42)
1.552 (39.42)
TYPE S
Fs
Es
Max.
Max.
.286 (7.26)
1.842 (46.79)
.416 (10.57)
1.842 (46.79)
.476 (12.09)
2.077 (52.76)
.626 (15.90)
2.077 (52.76)
.706 (17.93)
2.077 (52.76)
.831 (21.11)
2.137 (54.28)
.956 (24.28)
2.137 (54.28)
1.081 (27.46)
2.137 (54.28)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-65
Gr
Max.
.880 (22.35)
.950 (24.13)
1.010 (25.65)
1.070 (27.18)
1.130 (28.70)
1.190 (30.23)
1.260 (32.00)
1.320 (33.53)
TYPE R
Hr
Max.
.286 (7.26)
.416 (10.57)
.476 (12.09)
.626 (15.90)
.706 (17.93)
.831 (21.11)
.956 (24.28)
1.081 (27.46)
Er
Max.
2.115 (53.72)
2.250 (57.15)
2.340 (59.44)
2.475 (62.87)
2.574 (65.38)
2.767 (70.28)
2.890 (73.41)
3.012 (76.50)
Circular
L
(TYP)
Shell
Size
8
10
12
14
16
18
20
22
24
A
U THD
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 66
PV
MIL-C-26482, Series 2 Connectors
Wide Flange Receptacle
MS3472
PV72
4 HOLES .150 ± .005
(3.81 + 0.13mm)
DIA.
POLARIZING
GROOVE
A
B
A
DIA
Q
(TYP)
Circular
P THD
G
.140 RAD.
MAX.
Shell
Size
10
12
14
16
18
20
22
24
A
Max.
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
B
Max.
.493 (12.52)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.587 (14.91)
.587 (14.91)
.620 (15.75)
F
.130/.190
(3.30/4.83)
H
(TP)
F
Max.
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.215 (30.85)
1.275 (32.40)
1.275 (32.40)
1.275 (32.40)
G
Max.
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.110 (2.79)
.110 (2.79)
.110 (2.79)
H
Max.
.812 (20.62)
.938 (23.83)
1.031 (26.19)
1.125 (28.58)
1.203 (30.56)
1.297 (32.94)
1.375 (34.93)
1.500 (38.10)
Q
Max.
1.141 (28.98)
1.266 (32.16)
1.360 (34.54)
1.453 (36.91)
1.532 (38.91)
1.688 (42.88)
1.766 (44.86)
1.891 (48.03)
P Thread
UNEF
Class A
5/8-24
3/4-20
7/8-20
1-20
1 1/16-18
1 3/16-18
1 5/16-18
1 7/16-18
Jam Nut Receptacle
MS3474
PV74
POLARIZING
GROOVE
GG
L THD.
W
F
DIA
V
G
A
Shell
Size
8
10
12
14
16
18
20
22
24
V
Max.
.954 (24.23)
1.078 (27.38)
1.266 (32.16)
1.391 (35.33)
1.516 (38.51)
1.641 (41.68)
1.828 (46.43)
1.954 (49.63)
2.078 (52.78)
A
Max.
.767 (19.48)
.892 (22.66)
1.079 (27.41)
1.205 (30.61)
1.329 (33.76)
1.455 (36.96)
1.579 (40.11)
1.705 (43.31)
1.829 (46.46)
B
Max.
.113 (2.87)
.113 (2.87)
.113 (2.87)
.113 (2.87)
.113 (2.87)
.113 (2.87)
.148 (3.76)
.148 (3.76)
.148 (3.76)
F
Max.
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
B
H
.130/.190
(3.30/4.83)
G
Max.
.707 (17.96)
.707 (17.96)
.707 (17.96)
.707 (17.96)
.707 (17.96)
.707 (17.96)
.772 (19.61)
.772 (19.61)
.772 (19.61)
GG
Panel
Thickness
.187/.062 (4.75/1.57)
.187/.062 (4.75/1.57)
.187/.062 (4.75/1.57)
.187/.062 (4.75/1.57)
.187/.062 (4.75/1.57)
.187/.062 (4.75/1.57)
.250/.062 (6.35/1.57)
.250/.062 (6.35/1.57)
.219/.062 (5.56/1.57)
H
Max.
1.215 (30.86)
1.215 (30.86)
1.215 (30.86)
1.215 (30.86)
1.215 (30.86)
1.215 (30.86)
1.275 (32.40)
1.275 (32.40)
1.275 (32.40)
W
Dia.
Max.
1.078 (27.38)
1.203 (30.56)
1.391 (35.33)
1.516 (38.51)
1.641 (41.68)
1.766 (44.86)
1.954 (49.63)
2.078 (52.78)
2.203 (55.96)
L Thread
UNEF
Class 2
1/2-20
5/8-24
3/4-20
7/8-20
1-20
1 1/16-18
1 3/16-18
1 5/16-18
1 7/16-18
Gr
Max.
.880 (23.35)
.950 (24.13)
1.010 (25.65)
1.070 (27.18)
1.130 (28.70)
1.190 (30.23)
1.260 (32.00)
1.320 (33.53)
TYPE R
Hr
Max.
.286 (7.26)
.416 (10.57)
.476 (12.09)
.626 (15.90)
.706 (17.93)
.831 (21.11)
.956 (24.28)
1.081 (27.46)
BBr
Max.
2.115 (53.72)
2.250 (57.15)
2.340 (59.44)
2.475 (62.87)
2.574 (65.38)
2.767 (70.28)
2.890 (73.41)
3.012 (76.50)
Receptacle Assembly with Backshell
BBC REF.
BBR REF.
BBS REF.
FS
TYPE C TYPE S
TYPE R
HR
Backshell Assemblies not supplied with MS connectors
GR
REF.
Shell
Size
10
12
14
16
18
20
22
24
TYPE C
BBc
Max.
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.492 (37.90)
1.552 (39.42)
1.552 (39.42)
1.552 (39.42)
TYPE S
BBs
Fs
Max.
Max.
1.842 (46.79)
.286 (7.26)
1.842 (46.79)
.416 (10.57)
2.077 (52.76)
.476 (12.09)
2.077 (52.76)
.626 (15.90)
2.077 (52.76)
.706 (17.93)
2.137 (54.28)
.831 (21.11)
2.137 (54.28)
.956 (24.28)
2.137 (54.28)
1.081 (27.46)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-66
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 67
PV
MIL-C-26482, Series 2 Connectors
Straight Plug
MS3476
PV76
A
POLARIZING
BOSS
E THD.
U DIA.
W
.130/.190
(3.30/4.83)
MS3475
PV75
Shell
Size
8
10
12
14
16
18
20
22
24
A Dia.
Max.
.765 (19.43)
.840 (21.34)
.999 (25.37)
1.139 (28.93)
1.261 (32.03)
1.337 (33.96)
1.477 (37.52)
1.602 (40.69)
1.723 (43.76)
U
Max.
.782 (19.86)
.926 (23.52)
1.043 (26.49)
1.183 (30.05)
1.305 (33.15)
1.391 (35.33)
1.531 (38.89)
1.656 (42.06)
1.777 (45.14)
W
Max.
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
E Thread
UNEF Class 2A
1/2-20
5/8-24
3/4-20
7/8-20
1-20
1-1/16-18
1-3/16-18
1-5/16-18
1-7/16-18
Shell
Size
10
12
14
16
18
20
22
24
A Dia.
Max.
.840 (21.34)
.999 (25.37)
1.139 (28.93)
1.261 (32.03)
1.337 (33.96)
1.477 (37.52)
1.602 (40.69)
1.723 (43.76)
U
Max.
.926 (21.72)
1.043 (26.42)
1.183 (29.97)
1.305 (33.15)
1.391 (35.33)
1.531 (38.89)
1.656 (42.06)
1.777 (45.14)
W
Max.
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
1.230 (31.24)
E Thread
UNEF Class 2A
5/8-24
3/4-20
7/8-20
1-20
1-1/16-18
1-3/16-18
1-5/16-18
1-7/16-18
Straight Plug, RFI Shielded
Plug Assembly with Backshell
VC REF.
VR REF.
VS REF.
FS
TYPE C
GR
REF.
TYPE S
HR
TYPE R
Backshell Assemblies not supplied with MS connectors
Shell
Size
10
12
14
16
18
20
22
24
TYPE C
Vc
Max.
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
1.507 (38.28)
TYPE S
Vs
Fs
Max.
Max.
1.857 (47.17)
.286 (7.26)
1.857 (47.17)
.416 (10.57)
2.092 (53.14)
.476 (12.09)
2.092 (53.14)
.626 (15.90)
2.092 (53.14)
.706 (17.93)
2.092 (53.14)
.831 (21.11)
2.092 (53.14)
.956 (24.28)
2.092 (53.14)
1.081 (27.46)
GR
Max.
.880 (22.35)
.950 (24.13)
1.010 (25.65)
1.070 (27.18)
1.130 (28.70)
1.190 (30.23)
1.260 (32.00)
1.320 (33.53)
TYPE R
HR
Max.
.286 (7.26)
.416 (10.57)
.476 (12.09)
.626 (15.90)
.706 (17.93)
.831 (21.11)
.956 (24.28)
1.081 (27.46)
VR
Max.
2.130 (54.10)
2.265 (57.53)
2.355 (59.82)
2.490 (63.25)
2.589 (65.76)
2.722 (69.14)
2.845 (72.26)
2.967 (75.36)
Backshells (Non-MS)
Type C
Type S
Type R
Shell
Size
10
12
14
16
18
20
22
24
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-67
TYPE C (Short)
ITT CANNON
Conductive
(Nickel finish)
057-0716-002
057-0717-002
057-0718-002
057-0719-002
057-0720-002
057-0721-002
057-0722-002
057-0723-002
TYPE S (Straight)
ITT CANNON
Conductive
(Nickel finish)
057-0683-002
057-0684-002
057-0685-002
057-0686-002
057-0687-002
057-0688-002
057-0689-002
057-0713-002
TYPE R (90º)
ITT CANNON
Conductive
(Nickel finish)
057-0704-001
057-0705-001
057-0706-001
057-0707-001
057-0708-001
057-0709-001
057-0710-001
057-0711-001
Circular
A
DIA
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 68
PV
MIL-C-26482, Series 2 Connectors
Panel Cutouts
Narrow Flange and Thru-Bulkhead/Wide Flange
Jam Nut Receptacle
F DIA.
Circular
A
+ .010 (0.25)
A -.000 (0.00)
DIA.
± .005 (± .13)
R
(TYP.)
E
T DIA. 4 MTG. HOLES
Shell
Size
10
12
14
16
18
20
22
24
E
±.005 (0.13)
.661 (16.79)
.824 (20.93)
.948 (24.08)
1.072 (27.23)
1.197 (30.40)
1.322 (33.58)
1.447 (36.75)
1.572 (39.93)
Flange Front
and Rear
Mounting
F. Dia.
±.005 (0.13)
.697 (17.70)
.895 (22.73)
1.010 (25.65)
1.135 (28.33)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia.
.620 (15.75)
.740 (18.80)
.864 (21.95)
.990 (25.15)
1.118 (28.40)
1.240 (31.50)
1.366 (34.70)
1.490 (37.85)
1.616 (41.05)
R
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
Flange Front
and Rear
Mounting
Mounting
Hole
T
Screw
Dia.
Size
.125 (3.14)
#4
.125 (3.14)
#4
.125 (3.14)
#4
.125 (3.14)
#4
.125 (3.14)
#4
.125 (3.14)
#4
.125 (3.14)
#4
.125 (3.14)
#4
.155 (3.97)
#6
Shell
Size
10
12
14
16
18
20
22
24
A
Dia.
.740 (18.80)
.864 (21.95)
.990 (25.15)
1.118 (28.40)
1.240 (31.50)
1.366 (34.70)
1.490 (37.85)
1.616 (41.05)
R
.812 (20.62)
.938 (23.93)
1.031 (26.19)
1.125 (28.58)
1.203 (30.56)
1.297 (32.94)
1.375 (34.92)
1.500 (38.10)
Mounting
Hole
T
Screw
Dia.
Size
.155 (3.97)
#6
.155 (3.97)
#6
.155 (3.97)
#6
.155 (3.97)
#6
.155 (3.97)
#6
.155 (3.97)
#6
.155 (3.97)
#6
.155 (3.97)
#6
Panel Thickness
Narrow Flange Receptacle
Shown here are the maximum panel thickness
including screw head height allowable to
ensure complete connector operation.
Wide Flange Receptacle
.125 (3.18) Max. (backshell
clearance for front mount)
.118 (3.00 mm) maximum for
shell size 10 thru 18 (rear mount)
.212 (5.38 mm maximum for
shell size 20 thru 24 (rear mount)
.125 (3.18) Max. (backshell
clearance for front mount)
.087 (2.21mm) maximum for
shell size 10 thru 18 (rear mount)
.212 (5.38 mm maximum for
shell size 20 thru 24 (rear mount)
BACKSHELL
BACKSHELL
COUPLING NUT
COUPLING NUT
Dummy Stowage Receptacles
How To Order
G DIA
MS Description
PV Description
PVS -15
G
SERIES PREFIX
Contact Cavities
DUMMY RECEPTACLE
INDICATOR
-15-PV
CLASS
G - Conductive finish (nickel)
A - Nonconductive finish (anodized)
SHELL SIZE
8 through 24
4 HOLES
12
MS 3115 -12
L
SERIES PREFIX
MS - Complies with MIL-C-26482
MS STANDARD
3115 - Dummy receptacle
SHELL SIZE
8 through 24
CLASS
L - Conductive finish (nickel)
A - Nonconductive finish (anodized)
A
DIA
J
E
(TP)
F
(TYP)
K
NOTE: Usable on KPT/KPSE series also.
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia. Max.
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
E
(TYP)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
F
Max.
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
G
Max.
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
J
Max.
.493 (12.52)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.493 (12.52)
.587 (14.91)
.587 (14.91)
.620 (15.75)
K
Max.
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.078 (1.98)
.110 (2.79)
.110 (2.79)
.110 (2.79)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-68
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 69
PV
MIL-C-26482, Series 2 Connectors
Contact Arrangements
Face view, pin insert
A
B
E
D
G
A
B
J
K
F
E
D
C
A
E
B
8-98*
3-#20
I
10-6
6-#20
I
12-10
10-#20
I
12-8
8-#20
I
12-3
3-#16
II
A
A
H
L
J
G
B
M
K
F
L C
D
E
M
A
N
R
K
L
B
H
E
G
N
A
G
F
14-15
1-#16, 14-#20
I
L
B
T U P
S R
J
D
H
M
K
C
P
J
14-12
4-#16, 8-#20
I
K
C
A
N
V
C
R
T
S
G
F
B
H
F
D
E
Y
L
C
K
D
E
14-19
19-#20
I
14-18
18-#20
I
M
X
J
P
N
a
b
M Z
L
U D
V
W
E
H G F
A
W
B
H
F
V D
A
S
H
B
A
L
D
M
E
U
a
m
F
H
G
18-8
8-#12
I
16-26
26-#20
I
A
e
f
P
N
Shell Size
No. of Contacts
Service Rating
d
g
R
F
p
r
M
G
x
N
w
f
M
22-41
24-#20, 14-#16
I
r
F
L
G
d
K
J
H
U
M
D
X
g
e
H
G
G
K
J
H
G
Y
c
t
r
D
q
T
E
F
S
Z a b A
u
p
J
m
N
22-55
55-#20
I
C
d
D
e
f
F
G
h
H
J
j
k
M
E
g
K
L
24-61
61-#20
I
24-31
31-#16
I
24-19
19-#12
II
B
i
n
R
P
H
c
v
EE MM PP KK y
LL
z
DD
AA
CC
BB
U
S
T
F
G
GG HH w
x
FF NN
JJ
s
V
R
E
22-21
21-#16
lI
W
C
D
T
H
X
b
U
H
F
L
C
S
U
J
G
d
Q
d
W
V
c
M
c
K
B
a
f
K
b
t
F
P
Z
Y
E
S
b
A
N
L
J
T
J
F
a
n
B
R
X
V
20-41
41-#20
l
C
R
V
m
E
p
r
e
P
W
L
D
Z
u
s
N
B
P
E
a
s
d
e
K
Z
L
K
D
DD
EE
u
A
N
L
p
CC
v
p
h
a g
R
f
P
C
Y
l
t
S
Y
HH
g
K
M
BB
h
E
c
e
M
X
n
FF
H
J
L
P
a
n
j
T
M
B
X
k
U
D
20-39
2-#16, 37-#20
l
C
W
GG
n
Z
B
V
m
z
s
N
A
U
m
V
C
Y
t
A
W
B
f
P
F
AA
j
g
E
l
j
h
R
D
20-16
16-#16
II
l
R
S
P
G
T
c
u
h
G
k
E
R
H
S
D
n
s
S
E
F
H
J
C
b
t
j
Z
a
K
Y
B
Z
l
k
X
h
C
J
D
18-32
32-#20
I
A
Y
X
W
V
W
T
X
k
U
N
A
W
V
B
M
S
C
g
b
L
18-11
11-#10
II
V
f
j
c
N
F
d
P
C
K
B
U
e
R
K
G
A
T
C
D
E
E
X
J
G
B
U C
c
Y
K
16-23
1-#16, 22-#20
I
16-8
8-#16
II
R A
S T
N
T
A
C
14-5
5-#16
Ii
14-4
4-#12
I
P A
R S B
Z
T C
N
G
B
P
H
E
F
M
U
J
D
L
J
Shell Size
No. of Contacts
Service Rating
B
D
C
D
* Layouts are available in shell styles MS3470 and MS3476 only.
Alternate Insert Positions
Face view, pin insert
Shell
Size
8
N
Wº
10
Xº
Zº
12
Yº
Contact arrangements requiring reduced diameter
for lead-in chamfer on outer row of contact cavities
as indicated below.
Shell
8
12
14
14
14
16
Contact
Arrangements
33, -98
10
12
18
19
26
18
32
22
41
Contact Cavities
A, B, C
C, G
A, B, C, D, E F, G, and H
A, C, E, G, J, and L
B, D, F, H, K, and M
A, B, C, D, E, F, G, H, J, K, L, M, N,
P, and R
A, B, C, D, E, F, G, H, J, K, L, M, N,
P, R, S, and T
A, B, C, D, E, F, G, H, J, K, L, M, N,
P, R, S, T, U, V, W, X, and Y
14
16
18
20
22
24
Arrangement
33
98
6
3
8
10
4
5
12
15
18
19
8
23
26
8
11
32
16
39
41
21
41
55
19
31
61
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-69
N
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
0º
W
90º
90º
90º
60º
45º
40º
43º
17º
15º
30º
54º
158º
60º
180º
62º
85º
238º
63º
45º
16º
39º
30º
30º
90º
90º
Pos Code
X
112º
115º
92º
90º
110º
90º
165º
152º
270º
119º
138º
318º
144º
126º
135º
135º
142º
165º
225º
180º
Y
180º
203º
270º
184º
155º
180º
315º
180º
275º
241º
222º
333º
252º
225º
175º
264º
226º
315º
225º
270º
Z
292º
295º
273º
234º
270º
331º
338º
340º
265º
347º
333º
349º
314º
324º
Circular
8-33*
3-#20
I
Shell Size
No. of Contacts
Service Rating
A
H
B
C
D
C
Shell Size
No. of Contacts
Service Rating
A
H
F
B
B
C
F
E
G
A
C
A
CA
B
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 70
PV
MIL-C-26482, Series 2 Connectors
Thru-Bulkhesd Receptacle
PV-TBF
A
X
4 HOLES
.125/.115(3.18/2.92) DIA.
SIZES 8-22
.152/.142 (3.86/3.61) DIA.
SIZES 24 ONLY
X
POLARIZING
GROOVE
Circular
K
PANEL
PANEL
A
Dia. ± .003 (0.08)
.471 (11.96)
.588 (14.94)
.748 (19.00)
.873 (22.17)
.998 (25.35)
1.123 (28.52)
1.248 (31.70)
1.373 (34.87)
1.498 (38.05)
M
REAR
PANEL MOUNTING
FRONT
PANEL MOUNTING
Shell
Size
8
10
12
14
16
18
20
22
24
R
(TP)
A
DIA.
A
DIA.
K
±.016 (0.41)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.062 (1.57)
.094 (2.39)
.094 (2.39)
.094 (2.39)
Notes: 1) Shell available in conductive (nickel finish) only.
.140 RAD.
MAX.
L
L
Max.
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.125 (28.58)
1.406 (35.71)
1.406 (35.71)
1.406 (35.71)
M
±.016 (0.41)
.577 (14.66)
.577 (14.66)
.577 (14.66)
.577 (14.66)
.577 (14.66)
.577 (14.66)
.703 (17.86)
.703 (17.86)
.703 (17.86)
R
(TP)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
S
(TYP)
S
Max.
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
X
Max.
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.218 (5.54)
.344 (8.74)
.344 (8.74)
.311 (7.90)
2) Contacts are nonremovable.
How to Order - PV-TBF
PV-TBF
10
-6
PS
W
SERIES PREFIX
SHELL SIZE
INSERT ARRANGEMENTS
CONTACT STYLE
ALTERNATE POLARIZING POSITION
Notes: 1) Shell available in conductive
(nickel finish) only
CONTACT STYLE
SERIES PREFIX
Pin and socket
PV-TBF - ITT Cannon Prefix
SHELL SIZE
2) Contacts are nonremovable.
ALTERNATE POLARIZING POSITION
8 thru 24
INSERT ARRANGEMENTS
10-6, 14-19, 16-8, 16-26, 18-32, 20-39,
20-41, 22-41, 22-55, 24-61
No designation required for normal. Standard
MS alternate positions available.
3) Designed to MS3119 configuration and
meets the performance requirements of
MIL-C-26482 Series 2.
Tooling
Wire Contact Tools
Contact
Size
20
16
12
Cannon
Part Number
CIET-20-11
(274-7001-006)
CIET-16-03
(274-7002-000)
CIET-12-04
(274-7003-000)
M81969
Part Number
M81969/14-11
Insertion
Color Tip
Red
Extraction
Color Tip
White
Superseded
Mil. Pt. No.
MS27534-20, MS3447-20, NAS1664-20
Unwired Contact
Tools
Cannon Pt. No.
274-7007-000
M81969/14-03
Blue
White
MS27534-16, MS3447-16, NAS1664-16
274-7008-000
M81969/14-04
Yellow
White
MS27534-12, MS3447-12, NAS1664-12
274-7009-000
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-70
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:49 PM
Page 71
PV
MIL-C-26482, Series 2 Connectors
Protective Metal Caps
Plugs
PVS
MS
L
.169 ± .008 DIA.
(4.29 ± 0.20)
-12
-12
C
C
A
A
SERIES PREFIX
PVS - ITT Cannon Prefix
MS - Complies with MIL-C-26482 (Series 2)
A
TYPE
80 or 3180 - Plug Cap
81 or 3181 - Receptacle Cap
H +.500 (12.7)
-.250 (6.35)
CHAIN LENGTH
M
SHELL SIZE
Receptacles
8 thru 24
TERMINATION STYLE
R
Q
.094
2,39mm)
Max.
C -- Sash chain (MS approved)
N - Sash chain with ring (81 or 3181 type only) MS approved
N
FINISH
A - Hard anodic, non-conductive (MS approved)
G - Nickel, conductive (not MS) (PVS only)
B
H +.500 (12.7)
-.250 (6.35)
CHAIN LENGTH
Shell
Size
8
10
12
14
16
18
20
22
24
A
Max. Dia.
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.96)
1.501 (38.13)
B
Max.
.486 (12.34)
.607 (15.42)
.766 (19.46)
.890 (22.60)
1.015 (25.78)
1.141 (28.98)
1.265 (32.13)
1.390 (35.31)
1.515 (38.48)
NOTE: Usable on KPT/KPSE series also.
N style used primarily on Jam Nut Receptacle
F
Max. Dia.
.719 (18.26)
.844 (21.44)
1.000 (25.40)
1.125 (28.58)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
1.625 (41.26)
1.750 (44.45)
H
3.000 (76.20)
3.000 (76.20)
3.500 (88.90)
3.500 (88.90)
3.500 (88.90)
3.500 (88.90)
4.000 (101.60)
4.000 (101.60)
4.000 (101.60)
L
Max.
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.625 (15.88)
.625 (15.88)
.658 (16.71)
M
Max.
.399 (10.13)
.399 (10.13)
.399 (10.13)
.399 (10.13)
.399 (10.13)
.399 (10.13)
.461 (11.71)
.461 (11.71)
.494 (12.55)
N
Min. Dia.
.578 (14.68)
.703 (17.86)
.891 (22.63)
1.061 (25.81)
1.141 (28.98)
1.266 (32.16)
1.391 (35.33)
1.516 (38.51)
1.641 (41.68)
Q
Max.
.734 (18.64)
.859 (21.82)
1.000 (25.40)
1.125 (28.58)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
1.625 (41.26)
1.750 (44.45)
R
Max.
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.562 (14.27)
.602 (15.29)
Contacts
Contact
Size
20
20
16
16
12
12
Type
Socket
Pin
Socket
Pin
Socket
Pin
M39029
Number
M39029/5-115
M39029/4-110
M39029/5-116
M39029/4-111
M39029/5-118
M39029/4-113
1st
Brown
Brown
Brown
Brown
Brown
Brown
Color Brands
2nd
Brown
Brown
Brown
Brown
Brown
Brown
Thermocouple Contacts
3rd
Green
Black
Blue
Brown
Grey
Orange
ITT Cannon
980-0008-882
980-0008-885
980-0008-883
980-0008-886
980-0008-884
980-0008-887
Contact
Size
20 Pin
20 Socket
Alumel
030-1831-000
031-1013-000
Chromal
030-1832-000
031-1014-000
Wire Hole Fillers
Part Number
Contact
Size
20
Cannon
225-0070-000
Military
MS27488-20-2
Color
Code
Red
16
225-0104-000
MS27488-16-2
Green
12
225-0105-000
MS27488-12-2
Orange
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A
Circular
F
.047
1,19mm)
Max.
80
3180
A-71