ca_A1-A163.qxd:Layout 1 2/9/11 7:48 PM Page 1 ca_A1-A163.qxd:Layout 1 2/9/11 7:48 PM Page 14 Cannon KJ MIL-DTL-38999 Series II Connectors How To Order Military Nomenclature MS27473 T 18 F 35 S MS NUMBER SHELL STYLE A CLASS Circular SHELL SIZE HARDWARE FINISH MS NUMBER SHELL STYLE MS27472 - Wall Mounting Receptacle MS27473 - Straight Plug MS27474 - Jam Nut Receptacle MS27484 - Grounded Plug MS27497 - Wall Mounting Receptacle (back panel mounting) MS27513 - Box Mounting Receptacle MS27499 - Box Mounting Receptacle (Class E) MS27508 - Box Mounting (back panel mounting) (Class E) CLASS E - Environment - resistant with rear accessory (without strain relief) G - Environmental - resistant wall mount and jam nut receptacle and plug types. Space Grade. P - Enironment - resistant with straight potting cup accessories T - Environment - resistant (without rear accessory). (Class T not applicable to MS27499, MS27513, and MS27508.) CONTACT ARRANGEMENT CONTACT STYLE POLARIZING POSITION SHELL SIZE 8, 10, 12, 14, 16, 18, 20, 22, 24. CONTACT ARRANGEMENT See pages A-24 and A-25. HARDWARE FINISH STANDARD A - Bright cadmium over electroless nickel plate, 85ºF to + 302ºF (- 65ºC to + 150ºC) B - Olive drab cadmium over electoless nickel plate, - 85ºF to + 347ºF (- 65ºC to + 175ºC) F - Electroless nickel, - 85ºF to + 392ºF (-65ºC to + 200ºC) CONTACT STYLE P - Pin S - Socket *A - Less Pin Contact *B - Less Socket Contact *Used only when other than power contacts are to be installed (i.e. shielded, thermocouple, etc.) POLARIZING POSITION A, B, C, and D (no letter required for normal). See page A-23. Note: To order MS connectors less standard power contacts, purchase order must state "Less Contacts". ITT Nomenclature KJ 6 T 18 N 35 S N SERIES PREFIX SHELL STYLE CLASS SHELL SIZE HARDWARE FINISH SERIES PREFIX KJ - Series II - Low Profile SHELL STYLE 0 - Wall mounting receptacle 2 - Box mounting receptacle 3 - Wall mounting receptacle (back panel mounting) 5 - Box mounting receptacle (back panel mounting) 6 - Straight plug G6 - Straight plug, grounded 7 - Jam nut receptacle CLASS E - Environment - resistant with rear accessory (without strain relief) F - Environment - resistant with strain relief acccessory G - Environmental - resistant wall mount and jam nut receptacle and plug type. Space Grade. P - Environment - resistant with straight potting cup accessory R - Environment - resistant with full grommet seal without rear accessory; shell styles 2 and 5 only T - Environment - resistant (without rear accessory). (Class T not applicable to KJ2E, KJ2R, KJ5E and KJ5R.) CONTACT ARRANGEMNT CONTACT STYLE POLARIZING POSITION MODIFICATION CODE Note KJ supplied with exact complement of contacts. SHELL SIZE 8, 10, 12, 14, 16, 18, 20, 22, and 24. CONTACT ARRANGMENT See pages A-24 and A-25. HARDWARE FINISH STANDARD A - Bright cadmium over electroless nickel plate, 85ºF to + 302ºF (- 65ºC to + 150ºC) B - Olive drab cadmium over electroless nickel plate, - 85ºF to + 347ºF (- 65ºC to + 175˚C) N - Electroless nickel, - 85ºF to + 392ºF (-65ºC to + 200ºC) Z - Zinc Nickel, Black - - (Dash) When using a finish modification code CONTACT STYLE P - Pin S - Socket POLARIZING POSITION N(normal), A, B, C, D, see page A-23. MODIFICATION CODE L - Less contacts, not stamped on connector 16 - Outgassed NASA space graded connector 27- Outgassed, standard connector T-69 Olive Drab (Green) Zinc Cobalt Dimensions shown in inches (mm) Specifications and dimensions subject to change A-14 www.ittcannon.com ca_A1-A163.qxd:Layout 1 2/9/11 7:48 PM Page 15 Cannon KJ MIL-DTL-38999 Series II Connectors Wall Mounting Receptacle MS27472 (MS service class E, P, T) KJ0 POLARIZING KEYWAY A .322 (8.17) MAX. T THREAD M Circular J MAX. A DIA. N P DIA. .069 (1.74) MAX. BLUE BAND (INDICTATES REAR RELEASE CONTACT RETENTION SYSTEM) NOTE: For backshell dimensions and configurations, see pages A-30, A-32. Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) J Dia. Max. .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) M Max. .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.91) 1.578 (39.08) 1.703 (43.26) N T.P .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (27.36) 1.250 (31.76) 1.375 (34.92) P +.005 (0.13) -.010 (0.25) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) Overall length With Backshells T Thread 7/16-28UNEF-2A 9/16-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A E Straight .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) F Cable Clamp 1.555 (39.50) 1.555 (39.50) 1.555 (39.50) 1.790 (45.47) 1.790 (45.47) 1.790 (45.47) 1.790 (45.47) 1.930 (49.02) 1.900 (48.26) P Potting Max. 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.080 (27.43) Box Mounting Receptacle MS27499E (MS service class E) KJ2E L POLARIZING KEYWAY .322 (8.17) MAX. J MAX. M G DIA. A DIA. N P DIA. BLUE BAND (INDICTATES REAR RELEASE CONTACT RETENTION SYSTEM) .069 (1.74) MAX. NOTE: This connector does not accommodate backshells Shell Size A Dia. Max. G Dia. Max. J Dia. Max. L Max. M Max. N T.P. P +.005 (0.13) -.010 (0.25) 8 10 12 14 16 18 20 22 24 .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (33.95) 1.501 (38.13) .421 (10.69) .542 (13.77) .667 (16.94) .791 (20.09) .916 (23.27) 1.034 (26.26) 1.158 (29.41) 1.283 (32.59) 1.408 (35.76) .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.81) 1.578 (40.08) 1.703 (43.26) .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (27.36) 1.250 (31.75) 1.375 (34.93) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) Performance Specifications-Pages A-7, A-8. Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33. Contact Arrangements - Pages A-24, A-25. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A-15 ca_A1-A163.qxd:Layout 1 2/9/11 7:48 PM Page 16 Cannon KJ MIL-DTL-38999 Series II Connectors Box Mounting Receptacle (MS service class E) MS27513E (MS service class E) .463 (11.76) MAX. KJ2R L .322 (8.17) MAX. Circular A POLARIZING KEYWAY J MAX. G DIA. A DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) M N P DIA. .069 (1.74) MAX. NOTE: This connector does not accommodate backshells Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. G Dia. Max. J Dia. Max. .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (33.95) 1.501 (38.13) .421 (10.69) .542 (13.77) .667 (16.94) .791 (20.09) .916 (23.27) 1.034 (26.26) 1.158 (29.41) 1.283 (32.59) 1.408 (35.76) .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (27.67) 1.610 (40.89) L Max. M Max. .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) P +.005 (0.13) -.010 (0.25) N T.P. .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (27.36) 1.250 (31.75) 1.375 (34.93) .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.81) 1.578 (40.08) 1.703 (43.26) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.85) Wall Mounting Receptacle KJ3 MS27497 (MS service class E, P, T) .142 (3.01) MAX. PANEL THICKNESS (including mounting hardware) .477 (11.35) MAX. P DIA. T THREAD .322 (8.17) MAX. POLARIZING KEYWAY J DIA. A DIA. C DIA. M BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) N .069 (1.74) MAX. NOTE: For backshell dimensions and configurations, see pages A-30, A-32. Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) C Dia. Max. .522 (13.26) .639 (16.23) .808 (20.52) .935 (23.75) 1.058 (26.87) 1.183 (30.05) 1.308 (33.22) 1.433 (36.40) 1.568 (39.83) J Dia. Max. .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) M Max. .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.91) 1.578 (40.08) 1.703 (43.26) N T.P .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) P +.005 (0.13) -.010 (0.25) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) Overall Length With Backshells T Thread 7/16-28UNEF-2A 9/16-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A E Straight .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) F Cable Clamp 1.570 (39.88) 1.570 (39.88) 1.570 (39.88) 1.780 (45.21) 1.780 (45.21) 1.780 (45.21) 1.780 (45.21) 1.960 (49.78) 1.960 (49.78) P Potting Max. 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.080 (27.43) Performance Specifications-Pages A-7, A-8. Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33. Contact Arrangements - Pages A-24, A-25. Dimensions shown in inches (mm) Specifications and dimensions subject to change A-16 www.ittcannon.com ca_A1-A163.qxd:Layout 1 2/9/11 7:48 PM Page 17 Cannon KJ MIL-DTL-38999 Series II Connectors Box Mounting Receptacle (Back Panel) (MS service class E) MS27508E (MS service class E) L KJ5E A .447 (11.35) MAX. P DIA. POLARIZING KEYWAY .322 (8.17) MAX. C M G DIA. A BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) N .069 (1.74) MAX. K MAX. PANEL THICKNESS (including mounting hardware) NOTE: This connector does not accommodate backshells Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.42) 1.126 (28.60) 1.251 (31.77) 1.376 (34.95) 1.501 (38.13) C Dia. Max. .522 (13.26) .639 (16.23) .808 (20.52) .935 (23.75) 1.058 (26.87) 1.183 (30.05) 1.308 (33.22) 1.433 (36.40) 1.568 (39.83) G Dia. Max. .421 (10.69) .542 (13.77) .667 (16.94) .791 (20.09) .916 (23.27) 1.034 (31.34) 1.158 (34.52) 1.283 (32.59) 1.408 (35.76) J Dia. Max. .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) K Max. .147 (3.73) .152 (3.86) .152 (3.86) .152 (3.86) .152 (3.86) .152 (3.86) .179 (4.55) .179 (4.55) .169 (4.29) M Max. .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.24) 1.328 (33.73) 1.453 (36.91) 1.578 (40.08) 1.703 (43.66) L Max. .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) N T.P .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) P +.005 (0.13) -.010 (0.25) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) Box Mounting Receptacle (Back Panel) No MS part number L KJ5R .447 (11.35) MAX. P DIA. . .322 (8.17) MAX. POLARIZING KEYWAY .338 (8.58) MAX. J DIA. M N C G DIA. A BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) .069 (1.74) MAX. K MAX. PANEL THICKNESS (including mounting hardware) NOTE: This connector does not accommodate backshells Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.42) 1.126 (28.60) 1.251 (31.77) 1.376 (34.95) 1.501 (38.13) C Dia. Max. .522 (13.26) .639 (16.23) .808 (20.52) .935 (23.75) 1.058 (26.87) 1.183 (30.05) 1.308 (33.22) 1.433 (36.40) 1.568 (39.83) G Dia. Max. .421 (10.69) .542 (13.77) .667 (16.94) .791 (20.09) .916 (23.27) 1.034 (31.34) 1.158 (34.52) 1.283 (32.59) 1.408 (35.76) J Dia. Max. .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) Performance Specifications-Pages A-7, A-8. Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33. Contact Arrangements - Pages A-24, A-25. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A-17 K Max. .147 (3.73) .152 (3.86) .152 (3.86) .152 (3.86) .152 (3.86) .152 (3.86) .179 (4.55) .179 (4.55) .169 (4.29) L Max. .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) .185 (4.70) M Max. N T.P P +.005 (0.13) -.010 (0.25) .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.24) 1.328 (33.73) 1.453 (36.91) 1.578 (40.08) 1.703 (43.66) .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) Circular J DIA. ca_A1-A163.qxd:Layout 1 2/9/11 7:48 PM Page 18 Cannon KJ MIL-DTL-38999 Series II Connectors Straight Plug MS27473 (MS service class E, P, T) KJ6 A Circular POLARIZING KEYWAY T THREAD P DIA. G DIA. A DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) NOTE: For backshell dimensions and configurations, see pages A-30, A-32. Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. .485 (12.32) .606 (15.39) .765 (19.43) .890 (22.61) 1.014 (25.76) 1.140 (28.96) 1.264 (32.11) 1.389 (35.28) 1.514 (38.46) G Dia. Max. .749 (19.02) .858 (21.79) 1.030 (26.16) 1.155 (29.34) 1.280 (32.51) 1.405 (35.69) 1.530 (38.86) 1.640 (40.66) 1.765 (44.83) P Dia. Max. .630 (16.00) .752 (19.10) .925 (23.50) 1.050 (26.67) 1.172 (29.77) 1.304 (33.12) 1.435 (36.45) 1.560 (39.62) 1.688 (42.88) T Thread 7/16-28UNEF-2A 9/16-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A Overall Length With Backshells E F P Straight Cable Clamp Potting Max. 1.026 (26.06) 1.555 (39.50) 1.020 (25.91) 1.026 (26.06) 1.555 (39.50) 1.020 (25.91) 1.026 (26.06) 1.555 (39.50) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.930 (49.02) 1.020 (25.91) 1.104 (28.04) 1.930 (49.02) 1.080 (27.43) Straight Plug Grounded MS27484 (MS service class E, P, T) KJG6 POLARIZING KEYWAY T THREAD A P DIA. DIA. G DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) NOTE: For backshell dimensions and configurations, see pages A-30, A-32. Overall Length With Backshells Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. .485 (12.32) .606 (15.39) .765 (19.43) .890 (22.61) 1.014 (25.76) 1.140 (28.96) 1.264 (32.11) 1.389 (35.28) 1.514 (38.46) G Dia. Max. .749 (19.02) .858 (21.79) 1.030 (26.16) 1.155 (29.34) 1.280 (32.51) 1.405 (35.69) 1.530 (38.86) 1.640 (40.66) 1.765 (44.83) P Dia. Max. .630 (16.00) .752 (19.10) .925 (23.50) 1.050 (26.67) 1.172 (29.77) 1.304 (33.12) 1.435 (36.45) 1.560 (39.62) 1.688 (42.88) T Thread 7/16-28UNEF-2A 9/16-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A E Straight 1.026 (26.06) 1.026 (26.06) 1.026 (26.06) 1.026 (26.06) 1.026 (26.06) 1.026 (26.06) 1.026 (26.06) 1.026 (26.06) 1.104 (28.04) F Cable Clamp 1.555 (39.50) 1.555 (39.50) 1.555 (39.50) 1.790 (45.47) 1.790 (45.47) 1.790 (45.47) 1.790 (45.47) 1.930 (49.02) 1.930 (49.02) P Potting Max. 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.080 (27.43) Performance Specifications-Pages A-7, A-8. Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33. Contact Arrangements - Pages A-24, A-25. Dimensions shown in inches (mm) Specifications and dimensions subject to change A-18 www.ittcannon.com ca_A1-A163.qxd:Layout 1 2/9/11 7:48 PM Page 19 Cannon KJ MIL-DTL-38999 Series II Connectors Jam Nut Receptacle MS27474 (MS service class E, P, T) KJ7 A R P .109 (2.77) MAX. PANEL THICKNESS T THREAD G POLARIZING KEYWAY D MOUNTING FLAT BLUE BAND (INDICATES REAR RELEASE COTACT RETENTION SYSTEM) V THREAD S DIA. .105 (2.66) MAX. NOTE: For backshell dimensions and configurations, see pages A-30, A-32. Overall length With Backshells Shell Size C Dia. Max. D Max. G Max. J Max. P Max. R Max. Hex. S Dia. Max. T Thread V Thread E Straight F Cable Clamp P Potting Max. 8 .474 (12.04) .818 (20.78) .145 (3.68) .563 (14.30) .443 (11.25) 1.079 (27.41) 1.381 (35.08) 7/16-28UNEF-2A 7/8-20UNEF-2A .840 (21.34) 1.555 (39.50) 1.020 (25.91) 10 .591 (15.01) .942 (23.93) .145 (3.68) .680 (17.27) .443 (11.25) 1.205 (30.61) 1.506 (38.25) 9/16-24UNEF-2A 1-20UNEF-2A .840 (21.34) 1.555 (39.50) 1.020 (25.91) 12 .751 (19.08) 1.066 (27.08) .145 (3.68) .859 (21.82) .443 (11.25) 1.329 (33.76) 1.631 (41.43) 11/16-24UNEF-2A 1-1/8-18UNEF-2A .840 (21.34) 1.555 (39.50) 1.020 (25.91) 14 .876 (22.25) 1.191 (30.25) .145 (3.68) .984 (24.99) .443 (11.25) 1.455 (36.96) 1.756 (44.60) 13/16-20UNEF-2A 1-1/4-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91) 16 1.001 (25.43) 1.321 (33.55) .145 (3.68) 1.108 (28.14) .443 (11.25) 1.579 (40.11) 1.944 (49.38) 1-15/16-20UNEF-2A 1-3/8-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91) 18 1.126 (28.60) 1.441 (36.60) .145 (3.68) 1.233 (31.32) .443 (11.25) 1.705 (43.31) 2.022 (51.36) 1-1/16-18UNEF-2A 1-1/2-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91) 20 1.251 (31.78) 1.566 (39.78) .171 (4.34) 1.358 (34.49) .469 (11.91) 1.829 (46.46) 2.147 (54.53) 1-3/16-18UNEF-2A 1-5/8-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91) 22 1.376 (33.95) 1.691 (42.95) .171 (4.34) 1.483 (37.67) .469 (11.91) 2.017 (51.23) 2.271 (57.68) 1-5/16-18UNEF-2A 1-3/4-18UNS-2A .840 (21.34) 1.930 (49.02) 1.020 (25.91) 24 1.501 (38.13) 1.816 (46.13) .171 (4.34) 1.610 (40.89) .469 (11.91) 2.142 (54.41) 2.396 (60.86) 1-7/16-18UNEF-2A 1-7/8-18UNS-2A .860 (21.84) 1.900(48.26) 1.080 (27.43) Performance Specifications-Pages A-7, A-8. Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33. Contact Arrangements - Pages A-24, A-25. Panel Cutouts Flange Mounted Receptacle Jam Nut Receptacle P +_ .005 (0.13) 4 HOLES B +.000 (0.00) -.010 (0.25) R (T.P.) A +.010 (0.25) -.000 (0.00) A +.010 (0.25) -.000 (0.00) Shell Size 8 10 12 14 16 18 20 22 24 A Dia. .610 (15.49) .734 (18.64) .860 (21.84) .985 (25.02) 1.110 (28.19) 1.234 (31.34) 1.360 (35.54) 1.484 (37.69) 1.611 (40.92) P Dia. .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) R .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A-19 Mfg. Screw #4 #4 #4 #4 #4 #4 #4 #4 #6 Shell Size 8 10 12 14 16 18 20 22 24 A Dia. .885 (22.48) 1.010 (25.65) 1.135 (28.82) 1.260 (32.00) 1.385 (35.18) 1.510 (38.35) 1.635 (41.53) 1.760 (44.70) 1.885 (47.88) B Dia. .830 (21.08) .955 (24.26) 1.085 (27.56) 1.210 (30.73) 1.335 (33.91) 1.460 (37.08) 1.585 (40.26) 1.710 (43.43) 1.835 (46.61) Circular J DIA. C