ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 1 ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 44 Cannon Fiber Optics Design Guide High Density Circular Connector PHD38999 Series PHD Plug Connector NOTES: UNLESS OTHERWISE SPECIFIED. 1. FOR CAVITY LAYOUT / MARKING, SEE APPLICABLE "CSA" CANNON STANDARD ARRANGEMENT. 2. MATERIAL TYPE: BARREL: ALUMINUM ALLOY COUPLING NUT: ALUMINUM ALLOY REAR PLATE: ALUMINUM ALLOY COUPLING NUT RETAINING RING: STAINLESS STEEL SCREW, WASHERS, DOWEL PINS: STAINLESS STEEL INTERNAL SPRINGS: STAINLESS STEEL INTERNAL CUPS / CLIPS: COPPER 3. FINISH: ELECTROLESS NICKEL PLATING OR CADMIUM PLATING SEE CONNECTOR ASSEMBLY MATRIX TABLE FOR PART NUMBERS. 4 INSERT ASSEMBLY SHOWN IS OPTIONAL AND MAY BE ADDED TO, THE PLUG ASSEMBLY OR THE RECEPTACLE ASSEMBLY BUT NOT BOTH. SEE CONNECTOR ASSEMBLY MATRIX TABLE FOR PART NUMBERS. INSERT ASSEMBLY MATERIALS: ALUMINUM ALLOY FINISH: ELECTROLESS NICKEL PLATING STAINLESS STEEL HARDWARE INTERNAL SLEEVES CERAMIC PART NUMBER SHOWN: SHELL SIZE 17/20 POSITION CONTACT ARRANGEMENT SERVICE CLASS F - ELECTROLESS NICKEL -85˚F TO +392˚F SHELL STYLE W - OLIVE DRAB CADMIUM OVER ELECTROLESS NICKEL PLATE -85˚F TO 347˚F Fiber Optics CONNECTOR TYPE PHD38999/26 F E 20 P N ALTERNATE POSITIONS N (NORMAL) A, B, C, D, E, SHELL SIZE B 11 C 13 D 15 E 17 F 19 G 21 H 23 J 25 P - PIN S - SOCKET (INCLUDES INSERT ASSY) MILITARY DESIGNATION ITT CANNON DESIGNATION 4 CONTACT ARRANGEMENT SEE TABLE I AND TABLE II E Dimensions shown in inches (mm) Specifications and dimensions subject to change E-44 www.ittcannon.com ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 45 Cannon Fiber Optics Design Guide Comparison High DensitySpecification Circular Connector PHD38999 Series PHD Plug Connector CONNECTOR ASSEMBLY - SIZE #22 CONTACT MATRIX / 900um CABLE TYPE SAMPLE PART NUMBER CSA NUMBER CAVITY LAYOUT FINISH SHELL SIZE STANDARD NO. OF CAVITIES B +.008 -.000 D THREAD CLASS 2B (PLATED) K MAX L MAX Q DIA. MAX METRIC V THREAD (PLATED) W +.008 -.004 INSERT ASSEMBLY (OPTIONAL) 4 PHD38999/26FB4XX CSA-PHD 11-4 11 4 .831 .7500-0.1P-0.3L-TS .862 .969 M15X1-6g0.100R 195-2000-003 PHD38999/26FC8XX CSA-PHD13-8 13 8 1.000 .8750-0.1P-0.3L-TS 1.027 1.141 M18X1-6g0.100R 195-2000-005 PHD38999/26FD12XX CSA-PHD15-12 15 12 1.130 1.0000-0.1P-0.3L-TS 1.153 1.266 M22X1-6g0.100R PHD38999/26FE20XX CSA-PHD17-20 17 20 1.268 1.1875-0.1P-0.3L-TS 1.291 1.391 M25X1-6g0.100R PHD38999/26FF30XX CSA-PHD19-30 19 30 1.374 1.2500-0.1P-0.3L-TS 1.398 1.500 M28X1-6g0.100R PHD38999/26FG40XX CSA-PHD21-40 21 40 1.500 1.3750-0.1P-0.3L-TS 1.524 1.625 M31X1-6g0.100R 195-2000-013 PHD38999/26FH48XX CSA-PHD23-48 23 48 1.618 1.5000-0.1P-0.3L-TS 1.642 1.750 M34X1-6g0.100R 195-2000-015 PHD38999/26FJ72XX CSA-PHD25-72 25 72 1.744 1.6250-0.1P-0.3L-TS 1.768 1.875 M37X1-6g0.100R 195-2000-017 NICKEL 1.234 195-2000-007 195-2000-009 .760 195-2000-011 CONNECTOR ASSEMBLY - SIZE #16 CONTACT MATRIX / 2MM CABLE TYPE SAMPLE PART NUMBER CSA NUMBER CAVITY LAYOUT FINISH SHELL SIZE STANDARD NO. OF CAVITIES B +.008 -.000 D THREAD CLASS 2B (PLATED) K MAX L MAX METRIC V THREAD (PLATED) Q DIA. MAX W +.008 -.004 INSERT ASSEMBLY (OPTIONAL) 4 PHD38999/26FB2XX CSA-PHD11-2 11 2 .831 .7500-0.1P-0.3L-TS .862 .969 M15X1-6g0.100R 195-2000-002 PHD38999/26FC4XX CSA-PHD13-4 13 4 1.000 .8750-0.1P-0.3L-TS 1.027 1.141 M18X1-6g0.100R 195-2000-004 PHD38999/26FD6XX CSA-PHD15-6 15 6 1.130 1.0000-0.1P-0.3L-TS 1.153 1.266 M22X1-6g0.100R 195-2000-006 PHD38999/26FE8XX CSA-PHD17-8 17 8 1.268 1.1875-0.1P-0.3L-TS 1.291 1.391 M25X1-6g0.100R PHD38999/26FF12XX CSA-PHD19-12 19 12 1.374 1.2500-0.1P-0.3L-TS 1.398 1.500 M28X1-6g0.100R PHD38999/26FG16XX CSA-PHD21-16 21 16 1.500 1.3750-0.1P-0.3L-TS 1.524 1.625 M31X1-6g0.100R 195-2000-012 PHD38999/26FH24XX CSA-PHD23-24 23 24 1.618 1.5000-0.1P-0.3L-TS 1.642 1.750 M34X1-6g0.100R 195-2000-014 PHD38999/26FJ36XX CSA-PHD25-36 25 36 1.744 1.6250-0.1P-0.3L-TS 1.768 1.875 M37X1-6g0.100R 195-2000-016 NICKEL INTERNAL THREAD (INSERT JACK SCREW) L D THREAD W V THREAD 195-2000-008 .760 195-2000-010 .250± .006 TYP øQ B ALIGNMENT PIN HOLES 2X CONNECTOR/ INSERT ASSY FRONT SIDE INSERT ASSEMBLY ( OPTIONAL ) 4 K SIDE VIEW Fiber Optics MAIN KEY 12 O'CLOCK POSTION 1.234 BACK SIDE E Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com E-45 ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 46 Cannon Fiber Optics Design Guide High Density Circular Connector PHD38999 Series PHD Wall Mount Receptacle B øA SCALE 2:1 CONNECTOR PANEL CUTOUT NOTES: UNLESS OTHERWISE SPECIFIED. SHELL SIZE 1. FOR CAVITY LAYOUT / MARKING, SEE APPLICABLE "CSA" CANNON STANDARD ARRANGEMENT. 2. MATERIAL TYPE: BARREL: ALUMINUM ALLOY COUPLING NUT: ALUMINUM ALLOY REAR PLATE: ALUMINUM ALLOY COUPLING NUT RETAINING RING: STAINLESS STEEL SCREW, WASHERS, DOWEL PINS: STAINLESS STEEL INTERNAL SPRINGS: STAINLESS STEEL INTERNAL CUPS / CLIPS: COPPER A +.010/-.000 B +.000/-.010 11 .825 .770 13 1.010 .995 15 1.135 1.085 17 1.260 1.210 19 1.385 1.335 21 1.510 1.460 23 1.635 1.585 25 1.760 1.710 Fiber Optics 3. FINISH: ELECTROLESS NICKEL PLATING OR CADMIUM PLATING SEE CONNECTOR ASSEMBLY MATRIX TABLE FOR PART NUMBERS. 4 INSERT ASSEMBLY SHOWN IS OPTIONAL AND MAY BE ADDED TO, THE PLUG ASSEMBLY OR THE RECEPTACLE ASSEMBLY BUT NOT BOTH. SEE CONNECTOR ASSEMBLY MATRIX TABLE FOR PART NUMBERS. INSERT ASSEMBLY MATERIALS: ALUMINUM ALLOY FINISH: ELECTROLESS NICKEL PLATING STAINLESS STEEL HARDWARE INTERNAL SLEEVES CERAMIC PART NUMBER SHOWN: SHELL SIZE 17/20 POSITION CONTACT ARRANGEMENT SERVICE CLASS F - ELECTROLESS NICKEL -85˚F TO +392˚F W - OLIVE DRAB CADMIUM OVER ELECTROLESS NICKEL PLATE -85˚F TO 347˚F SHELL STYLE CONNECTOR TYPE E PHD38999/20 F E 20 P N ALTERNATE POSITIONS N (NORMAL) A, B, C, D, E, SHELL SIZE B 11 C 13 D 15 E 17 F 19 G 21 H 23 J 25 P - PIN S - SOCKET (INCLUDES INSERT ASSY) MILITARY DESIGNATION ITT CANNON DESIGNATION 4 CONTACT ARRANGEMENT SEE TABLE I AND TABLE II Dimensions shown in inches (mm) Specifications and dimensions subject to change E-46 www.ittcannon.com ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 47 Cannon Fiber Optics Design Guide Comparison High DensitySpecification Circular Connector PHD38999 Series PHD Wall Mount Receptacle CONNECTOR ASSEMBLY - SIZE #22 CONTACT MATRIX / 900um CABLE TYPE SAMPLE PART NUMBER CSA NUMBER CAVITY LAYOUT FINISH SHELL SIZE B THREAD CLASS 2 A (PLATED) STANDARD NO. OF CAVITIES M +.000 -.005 R1 R2 S +/-.012 PHD38999/20FB4XX CSA-PHD11-4 11 4 .7500-0.1P-0.3L-TS .812 .719 1.031 PHD38999/20FC8XX CSA-PHD13-8 13 8 .8750-0.1P-0.3L-TS .906 .812 1.125 PHD38999/20FD12XX CSA-PHD15-12 PHD38999/20FE20XX CSA-PHD17-20 NICKEL 15 12 1.0000-0.1P-0.3L-TS 17 20 1.1875-0.1P-0.3L-TS .820 .969 .906 1.219 1.062 .969 1.312 T +.004 -.002 .194 .173 .128 PHD38999/20FF30XX CSA-PHD19-30 19 30 1.2500-0.1P-0.3L-TS 1.156 1.062 1.438 PHD38999/20FG40XX CSA-PHD21-40 21 40 1.3750-0.1P-0.3L-TS 1.250 1.156 1.562 1.375 1.250 1.688 .154 1.500 1.375 1.812 .154 PHD38999/20FH48XX CSA-PHD23-48 23 48 1.5000-0.1P-0.3L-TS PHD38999/20FJ72XX CSA-PHD25-72 25 72 1.6250-0.1P-0.3L-TS .790 TT +.004 -.002 METRIC V THREAD (PLATED) Z W INSERT ASSEMBLY MAX +.005 (OPTIONAL) 4 -.010 M15X1-6g0.100R 195-2000-003 M18X1-6g0.100R 195-2000-005 M22X1-6g0.100R .098 M25X1-6g0.100R .194 195-2000-007 1.235 M28X1-6g0.100R M31X1-6g0.100R .242 M34X1-6g0.100R 195-2000-009 195-2000-011 195-2000-013 .126 195-2000-015 M37X1-6g0.100R 195-2000-017 CONNECTOR ASSEMBLY - SIZE #16 CONTACT MATRIX / 2MM CABLE TYPE SAMPLE PART NUMBER CSA NUMBER CAVITY LAYOUT FINISH SHELL SIZE STANDARD NO. OF CAVITIES B THREAD CLASS 2 A (PLATED) M +.000 -.005 R1 R2 S +/-.012 PHD38999/20FB2XX CSA-PHD11-2 11 2 .7500-0.1P-0.3L-TS .812 .719 1.031 PHD38999/20FC4XX CSA-PHD13-4 13 4 .8750-0.1P-0.3L-TS .906 .812 1.125 PHD38999/20FD6XX CSA-PHD15-6 PHD38999/20FE8XX CSA-PHD17-8 15 6 1.0000-0.1P-0.3L-TS .969 .906 1.219 17 8 1.1875-0.1P-0.3L-TS 1.062 .969 1.312 PHD38999/20FF12XX CSA-PHD19-12 19 12 1.2500-0.1P-0.3L-TS 1.156 1.062 1.438 PHD38999/20FG16XX CSA-PHD21-16 21 16 1.3750-0.1P-0.3L-TS 1.250 1.156 1.562 NICKEL PHD38999/20FH24XX CSA-PHD23-24 23 24 1.5000-0.1P-0.3L-TS PHD38999/20FJ36XX CSA-PHD25-36 25 36 1.6250-0.1P-0.3L-TS INTERNAL THREAD (INSERT ASSY JACK SCREW) FRONT SIDE .194 .173 .128 1.250 1.688 .154 1.375 1.812 .154 .242 M15X1-6g0.100R 195-2000-002 M18X1-6g0.100R 195-2000-004 M22X1-6g0.100R .098 M28X1-6g0.100R M34X1-6g0.100R 195-2000-006 1.235 195-2000-008 195-2000-010 195-2000-012 .126 M37X1-6g0.100R 195-2000-014 195-2000-016 Z M B THREAD T 4 PLACES Z W INSERT ASSEMBLY MAX +.005 (OPTIONAL) 4 -.010 M31X1-6g0.100R 1.375 4 INSERT ASSEMBLY ( OPTIONAL ) METRIC V THREAD (PLATED) M25X1-6g0.100R .194 1.500 MAIN KEY 12 O'CLOCK POSITION ALIGNMENT PIN HOLES 2X CONNECTOR / INSERT ASSY TT 4 PLACES .790 TT +.004 -.002 W MAX V THREAD SIDE VIEW Fiber Optics S R1 R2 .820 T +.004 -.002 BACK SIDE E Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com E-47 ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 48 Cannon Fiber Optics Design Guide High Density Circular Connector PHD38999 Series PHD Jam-Nut Receptacle PHD38999 JAM RECEPTACLE - SIZE 22 CONTACT MATRIX / 900um CABLE TYPE SAMPLE PART NUMBER CSA NUMBER CAVITY LAYOUT PHD38999/24FB4XX CSA-PHD11-4 11 FINISH SHELL SIZE STANDARD NO. OF CAVITIES A +.010 -.005 4 .104 B THREAD CLASS 2 A (PLATED) .7500-0.1P-0.3L-TS C +.004 -.010 Z +.005 -.004 .751 M +.005 -.004 P +.016 -.004 .871 .555 METRIC R THREAD (PLATED) S METRIC V THREAD (PLATED) INSERT ASSEMBLY (OPTIONAL) 1.250 M20X1-6g0.100R M15X1-6g0.100R 195-2000-003 PHD38999/24FC8XX CSA-PHD13-8 13 8 .104 .8750-0.1P-0.3L-TS .938 1.375 M25X1-6g0.100R M18X1-6g0.100R 195-2000-005 PHD38999/24FD12XX CSA-PHD15-12 15 12 .104 1.0000-0.1P-0.3L-TS 1.062 1.500 M28X1-6g0.100R M22X1-6g0.100R 195-2000-007 PHD38999/24FE20XX CSA-PHD17-20 17 20 .104 1.1875-0.1P-0.3L-TS 1.187 1.625 M32X1-6g0.100R M25X1-6g0.100R 195-2000-009 PHD38999/24FF30XX CSA-PHD19-30 19 30 .135 1.2500-0.1P-0.3L-TS 1.312 1.812 M35X1-6g0.100R M28X1-6g0.100R 195-2000-011 PHD38999/24FG40XX CSA-PHD21-40 21 40 .135 1.3750-0.1P-0.3L-TS 1.437 1.938 M38X1-6g0.100R M31X1-6g0.100R 195-2000-013 PHD38999/24FH48XX CSA-PHD23-48 23 48 .135 1.5000-0.1P-0.3L-TS 1.562 2.062 M41X1-6g0.100R M34X1-6g0.100R 195-2000-015 PHD38999/24FJ72XX CSA-PHD25-72 25 72 .135 1.6250-0.1P-0.3L-TS 1.687 2.188 M44X1-6g0.100R M37X1-6g0.100R 195-2000-017 SAMPLE PART NUMBER CSA NUMBER CAVITY LAYOUT PHD38999/24FB2XX CSA-PHD11-2 11 2 .104 .7500-0.1P-0.3L-TS .751 1.250 M20X1-6g0.100R M15X1-6g0.100R 195-2000-002 PHD38999/24FC4XX CSA-PHD13-4 13 4 .104 .8750-0.1P-0.3L-TS .938 1.375 M25X1-6g0.100R M18X1-6g0.100R 195-2000-004 PHD38999/24FD6XX CSA-PHD15-6 15 6 .104 1.0000-0.1P-0.3L-TS 1.062 1.500 M28X1-6g0.100R M22X1-6g0.100R 195-2000-006 PHD38999/24FE8XX CSA-PHD17-8 17 8 .104 1.1875-0.1P-0.3L-TS 1.187 1.625 M32X1-6g0.100R M25X1-6g0.100R 195-2000-008 PHD38999/24FF12XX CSA-PHD19-12 19 12 .135 1.2500-0.1P-0.3L-TS 1.312 1.812 M35X1-6g0.100R M28X1-6g0.100R 195-2000-010 PHD38999/24FG16XX CSA-PHD21-16 21 16 .135 1.3750-0.1P-0.3L-TS 1.437 1.938 M38X1-6g0.100R M31X1-6g0.100R 195-2000-012 PHD38999/24FH24XX CSA-PHD23-24 23 24 .135 1.5000-0.1P-0.3L-TS 1.562 2.062 M41X1-6g0.100R M34X1-6g0.100R 195-2000-014 PHD38999/24FJ36XX CSA-PHD25-36 25 36 .135 1.6250-0.1P-0.3L-TS 1.687 2.188 M44X1-6g0.100R M37X1-6g0.100R 195-2000-016 NICKEL 1.243 .878 .563 4 Fiber Optics PHD38999 JAM RECEPTACLE - SIZE #16 CONTACT MATRIX / 2MM CABLE TYPE FINISH NICKEL SHELL SIZE STANDARD NO. OF CAVITIES S TYP A +.010 -.005 B THREAD CLASS 2 A (PLATED) C +.004 -.010 Z +.005 -.004 M +.005 -.004 P +.016 -.004 .871 .555 1.243 .878 .563 METRIC R THREAD (PLATED) S METRIC V THREAD (PLATED) INSERT ASSEMBLY (OPTIONAL) 4 Z MAIN KEY 12 O'CLOCK POSITION M A P C FLAT FRONT VIEW INSERT ASSEMBLY 4 (OPTIONAL) B THREAD R THREAD V THREAD .062 MIN. / .125 MAX. PANEL THICKNESS REAR VIEW E Dimensions shown in inches (mm) Specifications and dimensions subject to change E-48 www.ittcannon.com ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 49 Cannon Fiber Optics Design Guide Comparison High DensitySpecification Circular Connector PHD38999 Series PHD Jam-Nut Receptacle B øA SCALE 2:1 CONNECTOR PANEL CUTOUT NOTES: UNLESS OTHERWISE SPECIFIED. SHELL SIZE 1. FOR CAVITY LAYOUT / MARKING, SEE APPLICABLE "CSA" CANNON STANDARD ARRANGEMENT. 2. MATERIAL TYPE: SHELL: ALUMINUM ALLOY FRONT PERIPHERIAL SEAL: FLUOROSILICONE REAR PLATE: ALUMINUM ALLOY SCREWS, WASHERS, DOWEL PINS: STAINLESS STEEL INTERNAL SPRINGS: STAINLESS STEEL INTERNAL CUPS / CLIPS: COPPER 3. FINISH: ELECTROLESS NICKEL PLATING OR CADMIUM PLATING SEE CONNECTOR ASSEMBLY MATRIX TABLE FOR PART NUMBERS. A +.010/-.000 B +.000/-.010 11 .825 .770 13 1.010 .995 15 1.135 1.085 17 1.260 1.210 19 1.385 1.335 21 1.510 1.460 23 1.635 1.585 25 1.760 1.710 Fiber Optics 4 INSERT ASSEMBLY IS OPTIONAL AND MAY BE ADDED TO THE PLUG ASSEMBLY OR THE RECEPTACLE ASSEMBLY BUT NOT BOTH. SEE CONNECTOR ASSEMBLY MATRIX TABLE FOR PART NUMBERS. INSERT ASSEMBLY MATERIALS: ALUMINUM ALLOY STAINLESS STEEL HARDWARE INTERNAL SLEEVES CERAMIC PART NUMBER SHOWN: SHELL SIZE 17/20 POSITION CONTACT ARRANGEMENT SERVICE CLASS F - ELECTROLESS NICKEL -85˚F TO +392˚F SHELL STYLE W - OLIVE DRAB CADMIUM OVER ELECTROLESS NICKEL PLATE -85˚F TO 347˚F CONNECTOR TYPE E PHD38999/24 F E 20 P N ALTERNATE POSITIONS N (NORMAL) A, B, C, D, E, SHELL SIZE B 11 C 13 D 15 E 17 F 19 G 21 H 23 J 25 P - PIN S - SOCKET (INCLUDES INSERT ASSY) MILITARY DESIGNATION ITT CANNON DESIGNATION CONTACT ARRANGEMENT SEE TABLE I AND TABLE II Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com E-49 4 ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 50 Cannon Fiber Optics Design Guide High Density Circular Connector PHD38999 Series PHD Front Insert Assembly INSERT ASSY SIZES 13 THRU 25 INSERT ASSY SIZE 11 NOTES: UNLESS OTHERWISE SPECIFIED. 1. FOR CAVITY LAYOUT SEE APPLICABLE "CSA" CANNON STANDARD ARRANGEMENT. Fiber Optics Insert Assy 2. MATERIAL: TYPE / FINISH INSERT: ALUMINUM ALLOY / ELECTROLESS NICKLE PLATE HARDWARE: STAINLESS STEEL / PASSIVATED INTERNAL SLEEVES: CERAMIC Guide Pin Jackscrew PART NUMBER SHOWN: SHELL SIZE 17/20 POSITION CONTACT ARRANGEMENT SERVICE CLASS F - ELECTROLESS NICKEL -85∞F TO +392∞F SHELL STYLE CONNECTOR TYPE PHD38999/30 F E 20 E CONTACT ARRANGEMENT SEE TABLE I & TABLE II SHELL SIZE B 11 C 13 D 15 E 17 F 19 G 21 H 23 J 25 MILITARY DESIGNATION ITT CANNON DESIGNATION Dimensions shown in inches (mm) Specifications and dimensions subject to change E-50 www.ittcannon.com ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 51 Cannon Fiber Optics Design Guide Comparison High DensitySpecification Circular Connector PHD38999 Series PHD Front Insert Assembly INSERT ASSEMBLY - SIZE #22 CONTACT MATRIX CSA NUMBER SHELL STANDARD NO. FINISH CAVITY LAYOUT SIZE OF CAVITIES PART NUMBER A (DIA) PHD38999/30FB4 CSA-PHD11-4 11 4 .421 PHD38999/30FC8 CSA-PHD13-8 13 8 .535 PHD38999/30FD12 CSA-PHD15-12 15 12 .660 PHD38999/30FE20 CSA-PHD17-20 17 20 .785 PHD38999/30FF30 CSA-PHD19-30 19 30 .874 PHD38999/30FG40 CSA-PHD21-40 21 40 1.000 PHD38999/30FH48 CSA-PHD23-48 23 48 1.124 PHD38999/30FJ72 CSA-PHD25-72 25 72 1.248 NICKEL INSERT ASSEMBLY - SIZE #16 CONTACT MATRIX CSA NUMBER SHELL STANDARD NO. FINISH CAVITY LAYOUT SIZE OF CAVITIES PART NUMBER A (DIA) PHD38999/30FB2 CSA-PHD11-2 11 2 .421 PHD38999/30FC4 CSA-PHD13-4 13 4 .535 PHD38999/30FD6 CSA-PHD15-6 PHD38999/30FE8 CSA-PHD17-8 15 6 .660 17 8 PHD38999/30FF12 .785 CSA-PHD19-12 19 12 .874 PHD38999/30FG16 CSA-PHD21-16 21 16 1.000 PHD38999/30FH24 CSA-PHD23-24 23 24 1.124 PHD38999/30FJ36 CSA-PHD25-36 25 36 1.248 .284 .342 .284 ALIGNMENT PINS JACK SCREW ALIGNMENT PINS FRONT SIDE ALIGNMENT PINS JACK SCREW JACK SCREW INSERT PLATE Fiber Optics øA NICKEL BACK SIDE SIDE VIEW E Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com E-51