ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 1 ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 59 Cannon Fiber Optics Design Guide Specification Comparison MIL-PRF-NGCON ITT’s NGCON Fiber Optic Connector System The next generation connector system for Naval and other Military/Aero-Space applications Consult Factory for C.O.T.S/MIL Spec Product Availability and Qualification Status MIL-PRF-NGCON Compliant Fiber Optic Connector System ITT’s Next Generation Connector (NGCON) combines proven technology and features from connector standards 28876 and 38999. This new connector system was designed with innovations including genderless contacts and high density packaging. ITT led the high performance connector development effort and is an active member of the NGCON design committee. Multimode Singlemode Product Features • • • • Ferrule (O.D.) 1.25 mm 1.25 mm Fiber Type 62.5/125 SMF 28 Insertion Loss (dB typ.) 0.40 0.30 Maximum Loss (dB max.) 0.75 0.75 Return Loss (dB typ.) 35 50 Return Loss (dB min.) 30 50 Channel Servicing Single Channel Repair Single Cyclic Durability 500 Fiber Optics • • • • • Conforms to NGCON Military Standard Rear Release Termini Genderless Termini Wall-Mount & Jam-Nut Receptacle Configurations High Density Arrangements Operating Temperature Range: -55C to +200C. Environmental Sealing Terminus 125 mm Diameter Ceramic Ferrule Removable front insert Easy access to termini for cleaning / inspections. E Applications include: Naval Shipboard / Dockside Communications and other Military Fiber Optic Interconnect Applications. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com E-59 ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 60 Cannon Fiber Optics Design Guide MIL-PRF-NGCON NGCON Fiber Optic Connector System Genderless Terminus design with Low Loss Optical Performance. Consult Factory for C.O.T.S/MIL Spec Product Availability and Qualification Status 1.160 MAX ø .125 ø .091 [ 2.31 ] .234 [ 5.94 ] FERRULE I.D. ø 1.25 mm RETENTION CLIP O-RING CRIMP SLEEVE Descriptive Part Number M29504/18 NGCON / T 18 M Genderless Terminus 1 - 1260 – M0001 for use with MIL-PRF-NGCON style NGCON Connectors Fiber Optics Fiber Size ITT Series Ferrule I.D. Dash No. ITT Part Number Terminus Assy Singlemode 9/125 125 +1/-0 -1250 031-9747-001 Singlemode 9/125 125.5 +1/-0 -1255 031-9747-003 Terminus Style Singlemode 9/125 126 +1/-0 -1260 031-9747-004 Terminus Type Multimode 50/125, 62.5/125 126 +1/-0 -1260 031-9747-005 Crimp Sleeve - Jacket O.D. Multimode 50/125, 62.5/125 127 +1/-0 -1270 031-9747-002 Ferrule I.D. Dash Number Multimode 100/140 142 +1/-0 -1420 031-9747-006 Multimode 100/140 145 +1/-0 -1450 031-9747-007 Multimode 50/125, 62.5/125/155 156 +3/-0 -1560 031-9747-008 Multimode 50/125, 62.5/125/155 157 +3/-0 -1570 031-9747-009 Multimode 100/140/172 173 +3/-0 -1730 031-9747-010 Multimode 100/140/172 175 +3/-0 -1750 031-9747-011 Modification Code Terminus Type S – Singlemode M – Multimode Terminus Style 18 – Genderless Terminus 19 – Dummy Terminus 20 – Keyed Terminus Crimp Sleeve - Jacket O.D 1 – 1.6mm - 2.0mm 2 – 1.8mm - 2.4mm 3 – 2.4mm - 3.0mm • Crimp Sleeve may be ordered separately. Part Number 252-0378-000 Modification Code Consult Factory for Modification Codes (Omit for none) PRODUCT NOTES E 1. Packaging: Packaging identification includes manufacturer’s name and part number 2. Material / Finish: Ferrule Connector assembly : Zirconia Ceramic/N.A. Terminus assembly: Stainless Steel / Passivate Retaining Clip: Beryllium Copper/NA Crimp Sleeve: Brass Alloy/N.A O-Ring: Fluorosilicone Spring: High Tensile Stainless Steel/Passivate 3. Tooling: Insertion: Tool Part Number: 274-0058-000 Removal Tool Part Number: 274-0058-001 4. Instructions: Consult factory for contact termination instructions and tooling. 5. Connector: Genderless Terminus used in NGCON Plug and Receptacle configurations. See Page 56-58 for connector options. E-60 www.ittcannon.com ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 61 Cannon Fiber Optics Design Guide Specification Comparison MIL-PRF-NGCON Plug Connector (MIL-PRF-NGCON/2) Consult Factory for C.O.T.S/MIL Spec Product Availability and Qualification Status 1.662 MAX J METRIC THREAD øA MAX .875 [ 22.23 ] .257 [ 6.53 ] Shell Size Channels A J - Accessory Thread 11 2 1.028 (26.1) M15 X 1 13 6 1.141 (30.0) M18 X 1 15 10 1.263 (32.1) M22 X 1 23 36 1.705 (43.3) M34 X 1 1. Packaging: Packaging identification includes manufacturer’s name and part number. 2. Material / Finish: Insert: Aluminum Alloy / Electroless Nickel Hardware Stainless Steel / Passivated Internal Alignment Sleeves: Ceramic Shell / Shell Hardware: Aluminum Alloy / Olive Drab Cadmium over Electroless Nickel Screws, Washers, Alignment pins: Stainless Steel / NA 3. Tooling: Termini Insertion Tool Part Number: 274-0058-000 Termini Removal tool Part Number: 274-0058-001 4. Insert: Front Alignment Insert Assembly may be added to the Plug Assembly or the Receptacle Assembly but not both. See Connector Assembly Matrix for Part Numbers. 5. Termini: Genderless design allows termini to be used in Plug and Receptacle configurations. See Page 54 for Product Details. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com Fiber Optics PRODUCT NOTES E-61 E ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 62 Cannon Fiber Optics Design Guide MIL-PRF-NGCON Jam-Nut Mount Receptacle Connector (MIL-PRF-NGCON/3) Consult Factory for C.O.T.S/MIL Spec Product Availability and Qualification Status 3X ø E MAX .115 [ 2.92 ] .125 [ 3.18 ] øC øD MAX 2X B Fiber Optics .948 [ 24.08 ] E K J METRIC THREAD øM 1.612 [40.94] MAX Recommended Panel Cut Out Shell Size Channels B C D E K M Max Panel Thickness JAccessory Thread 11 2 1.264 (32.1) 1.358 (34.5) .875 (22.2) 1.075 (27.3) .848 (21.5) .885 (22.5) .188 (4.78) M15 X 1 13 6 1.389 (35.3) 1.498 (38.1) 1.000 (25.4) 1.205 (30.6) .973 (24.7) 1.010 (25.7) .188 (4.78) M18 X 1 15 10 1.577 (40.1) 1.671 (42.4) 1.188 (30.2) 1.392 (35.4) 1.160 (29.5) 1.198 (30.4) .188 (4.78) M22 X 1 23 36 2.004 (50.9) 2.098 (53.3) 1.625 (41.3) 1.812 (46.0) 1.593 (40.5) 1.630 (41.4) .188 (4.78) M34 X 1 PRODUCT NOTES 1. Packaging: Packaging identification includes manufacturer’s name and part number. 2. Material / Finish: Insert: Aluminum Alloy / Electroless Nickel Hardware Stainless Steel / Passivated Internal Alignment Sleeves: Ceramic Shell / Shell Hardware: Aluminum Alloy / Olive Drab Cadmium over Electroless Nickel Screws, Washers, Alignment pins: Stainless Steel / NA 3. Tooling: Termini Insertion Tool Part Number: 274-0058-000 Termini Removal tool Part Number: 274-0058-001 4. Insert: Front Alignment Insert Assembly may be added to the Plug Assembly or the Receptacle Assembly but not both. See Connector Assembly Matrix for Part Numbers. 5. Termini: Genderless design allows termini to be used in Plug and Receptacle configurations. See Page 54 for Product Details. Dimensions shown in inches (mm) Specifications and dimensions subject to change E-62 www.ittcannon.com ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 63 Cannon Fiber Optics Design Guide Specification Comparison MIL-PRF-NGCON Wall Mount Receptacle Connector (MIL-PRF-NGCON/1) Consult Factory for C.O.T.S/MIL Spec Product Availability and Qualification Status 2X N 1.612 [40.94] MAX 4X ø .122 [3.10] K METRIC THREAD øH MAX 2X F .115 [ 2.92 ] .888 [ 22.56 2X G øP 4X ø .122 [ 3.1 ] ] Recommended Mounting Channels F G H N P Max Panel Thickness JAccessory Thread 11 2 1.023 (26.0) .750 (19.1) .750 (19.1) .750 (19.1) .800 (20.3) .188 (4.78) M15 X 1 13 6 1.138 (28.9) .843 (21.4) .875 (22.2) .843 (21.4) .925 (23.5) .188 (4.78) M18 X 1 15 10 1. 258 (31.9) .968 (24.6) 1.062 (27.0) .968 (24.6) 1.110 (28.2) .188 (4.78) M22 X 1 23 36 1.718 (43.6) 1.281 (32.5) 1.500 (38.1) 1.281 (32.5) 1.550 (39.4) .188 (4.78) M34 X 1 PRODUCT NOTES 1. Packaging: Packaging identification includes manufacturer’s name and part number. 2. Material / Finish: Insert: Aluminum Alloy / Electroless Nickel Hardware Stainless Steel / Passivated Internal Alignment Sleeves: Ceramic Shell / Shell Hardware: Aluminum Alloy / Olive Drab Cadmium over Electroless Nickel Screws, Washers, Alignment pins: Stainless Steel / NA 3. Tooling: Termini Insertion Tool Part Number: 274-0058-000 Termini Removal tool Part Number: 274-0058-001 4. Insert: Front Alignment Insert Assembly may be added to the Plug Assembly or the Receptacle Assembly but not both. See Connector Assembly Matrix for Part Numbers. 5. Termini: Genderless design allows termini to be used in Plug and Receptacle configurations. See Page 54 for Product Details. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com E-63 Fiber Optics Shell Size E ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 64 Cannon Fiber Optics Design Guide MIL-PRF-NGCON Consult Factory for C.O.T.S/MIL Spec Product Availability and Qualification Status Descriptive Part Number ITT Series NGCN - NGCON Fiber Optic Connector System NGCN / 1 B S 1 B 1 B X – M001 Connector Type 1 - Receptacle, Wall Mount 2 - Plug 3 - Receptacle, Jam Nut Mount Connector Type Arrangement Arrangement (Shell Size / Channels) B - Shell Size 11 / 2 Channels C - Shell Size 13 / 6 Channels D - Shell Size 15 / 10 Channels H - Shell Size 23 / 36 Channels Insert Style Insert Style P - Pin S - Socket (With Front Alignment Insert) Dust Cap Keying Position Key Configuration 1 through 9, A, B, C Fiber Optics ITT Series Backshell Configuration B - Straight C - Environmental 45° D - 90° E - Straight, Light Duty F - EMI Retention Nut X - No Backshell Backshell Cable OD 1 - .315 [8.00] 2 - .425 [10.80] 3 - .563 [14.30] 4 - .817 [20.75] F - .071/.094 [1.80/2.39] 0 - No Backshell Keying Backshell Config Cable OD Class Modification Code Class F W A S - Electroless nickel finish Olive drab over electroless nickel finish Anodize, Black finish Stainless Steel, Passivated Dust Cap W - Connector Supplied with Dust Cap X - Without Dust Cap Modification Code Consult Factory for Modification Codes (Omit for none) E Dimensions shown in inches (mm) Specifications and dimensions subject to change E-64 www.ittcannon.com ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 65 Cannon Fiber Optics Design Guide Specification Comparison MIL-PRF-NGCON VEAM Duplex Connectors The VEAM duplex connector with 10SL-2 size arrangement, with its small dimensions, performs the connection where there are critical environmental conditions. The typical bayonet coupling allows an easy mating and a good mechanical resistance; the IP67 protection degree allows the use anywhere; the cable clamp and the Kevlar retention device guarantee a perfect integration with the cable; and the standard Ø2,5mm ceramic ferrules offer high optical performance. • 2 channels weatherproof connector Markets: • Small dimensions Military Industrial • Bayonet coupling • Zirconia ferrule 2.5mm diam epoxy – polish type • Standard duplex jacketed cable applicable • 0.5dB max insertion loss. • Single and Multimode fiber applicable VEAM VOC, 4 Channel Optical Connectors Fiber Optics The VEAM 4 channel optical connector VOC is available in both threaded and bayonet coupling; in addition to excellent characteristics of mechanical and environmental resistance, it offers small size and high optical performances. It uses alignment sleeve and the standard ceramic ferrules of FC/PC connectors. The receptacle connector is suitable for use with single fiber cables and offer the crimping of Kevlar reinforcement; the plug connector accepts multi-fiber jacketed cables. • Easy to use and reliable 4 channels connector • Threaded or bayonet coupling system • Standard 2.5mm ferrules FC/PC type • Water-tightness IP67 Markets: • Epoxy – crimp – polish termination method Industrial Railway • 0.5dB max insertion loss Military • Single and Multimode fiber applicable Please contact our Italy or Watertown CT Customer Service Centers for more information on the VEAM Custom Optical Solutions Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com E-65 E ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 66 Cannon Fiber Optics Design Guide VEAM Custom Optical Solutions VEAM 6 Channel Connectors The VEAM 6 Channel connector was developed for data transmission on trains (Internet, satellite HDTV and entertainment). It allows the optical connection of six channels between coaches, with high signal performances and reliable mechanical and environmental characteristics. Protected by the robust design of the CIR bayonet connectors, six optical contacts are located in a metallic insert; the ceramic ferrules, the alignment split sleeves and the sprung female contacts always guarantee low signal loss. • 6 channels waterproof connector • Stainless steel mating shells with rubber covered coupling nut • Coaxial backshell on plug for easy harnessing procedures • Zirconia ferrule 2.5mm diam epoxy – polish type • Female front insert removable for easy ferrules cleaning • 0.8dB max insertion loss • Multimode fiber applicable Market: Railway Fiber Optics Please contact our Italy or Watertown CT Customer Service Centers for more information on the VEAM Custom Optical Solutions E Dimensions shown in inches (mm) Specifications and dimensions subject to change E-66 www.ittcannon.com ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 67 Cannon Fiber Optics Design Guide Specification Comparison VEAM Custom Optical Solutions Heavy Duty Connectors The FRBOF series of circular multi-channel optical connectors have quarter turn bayonet coupling and utilize the shells and accessories of the extremely reliable VEAM CIR series. They are available in varied configurations for both cable and panel mount applications. This is a very rugged, heavy duty connector family for use in hostile environments (external use, railways applications, etc.). In addition to being rugged, waterproof and dust proof, the optical interface is easily cleaned in the field without disassembly. Available in 2, 4, 9 and 12 channels configurations Markets: Railway 22 Channel Optical Connector Incorporating the MVPOC–miniature type contacts with 1,5mm diameter ferrule, these connectors offer an increased number of optical channels with small external dimensions. The coupling is bayonet type, and varied configurations for cable and panel mount are available. Resistance to environmental conditions allows the use of these connectors in applications where water tightness, retention and protection of the cable and resistance to mechanical damages are required. Market: Industrial The connector with standard rubber insert 18-11 size arrangement is a typical example of the VFOT contacts application. This connector is available with 3 electric contacts size 12 and 2 optical contacts for Multimode fiber. Fiber Optics Hybrid Connector with VFOT Contacts This connector was selected to transmit signals along the motorways; the 3 electrical contacts supply the power to the electronic devices, which collect and transmit information over the two optical channels in the same connector. The jacketed cable on the plug is clamped and screened with the shells and then protected by a plastic overmolding. Market: Industrial Please contact our Italy or Watertown CT Customer Service Centers for more information on the VEAM Custom Optical Solutions Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com E-67 E ca_E1-E68:Layout 1 2/10/11 9:37 AM Page 68 Cannon Fiber Optics Design Guide VEAM Custom Optical Solutions DIN 41626-3 Optical Contacts These contacts can be used on DIN 41612 and D-sub standard connectors. They are available in male and female passive configurations. Versions with transmitting and receiving diodes are also available. • Standard 2.5mm ferrule. • Multimode fibers. Contacts termination epoxy-crimp-polish type. • Simplicity of assembly; insertion into the connectors snap-in type. • Visual identification of component type (emitter or receiver). • Setting of the optical characteristics Market: Railway Miniaturized Hybrid Connector The MHC4—is a custom design connector developed according to the specific requirements of the customer: mixed contacts (for electrical and optical signals), very small dimensions, easy to assembly without tools, with a dedicated fixing layout to satisfy the need of floating push pull mating characteristics and to comply to the customer hardware. Market: Military Fiber Optics 16 Channel PCB Connector VEAM has developed a system of active optical connection, based on the dimensional standard of DIN41612 style E, but able to accommodate up to 16 electro-optic components. The VRC41612E-16—system allows the adoption of industrial methods of soldering to PCB, thus avoiding the long and expensive operations of pin to pad soldering, required when traditional components are used. The 90° dip-solder terminal on the back connector are soldered onto the card; this connector is provided with plug-in sockets for the active components. The front connector fix the device and allows the coupling with the plug connector. Installation, substitution and maintenance is extremely simple and fast and can be effected in the field without the aid of special tools. E Please contact our Italy or Watertown CT Customer Service Centers for more information on the VEAM Custom Optical Solutions Dimensions shown in inches (mm) Specifications and dimensions subject to change E-68 www.ittcannon.com