ca_I1-I40.qxd:Layout 1 2/10/11 8:43 AM Page 1 ca_I1-I40.qxd:Layout 1 2/10/11 8:44 AM Page 39 Mini RF Mini RF connectors are the ideal solution for customers producing devices that require verification of antenna or circuit board performance. They are specifically designed for use with portable terminal interfaces and the inspection of microwave boards used at frequencies of up to 6 GHz. The specially incorporated flared interface cone not only allows the user to snap on a bench test adaptor but also allows high mating cycles on the accessory connector. Features & Benefits of the Design 120220-0180 Accessory connector, 120220-0190 Test Port Base materials Copper alloy - Shell LCP plastic - Insulator Beryllium copper - Contacts 120220-0180 - Gold over nickel Plating ELECTRICAL Frequency Impedance VSWR Insertion loss 0.01 - 6 GHz 50Ω nominal ≤ 1.2:1 unmated condition <0.1 dB mated condition <0.5 dB Dielectric withstanding voltage 100 VAC (150 V peak) Contact resistance 200mΩ max (initial) Power 2 watts MECHANICAL Mating Cycles 120220-0180 (with cradle connector) up to 10,000 mating cycles Accessories Ball Nose Cradle connector typical for car kit applications and Low Profile Jump Cable typical for board-toboard system connection. Applications • Mobile handset • Other wireless (PDA, PPC, Gaming) • Portable phones • Network carriers - base stations • Automotive - key fob / locking • Industrial - transportation equipment • Cable houses - board-to-board cable interconnect • Electronic measuring instrumentation / equipment • GPS - navigation systems (ETC) • Wireless LAN And any small devices requiring verification of antenna/ circuit performance. ENVIRONMENTAL Operating temperature -40 to 85˚C Humidity operable in 95% RH temp +40˚C Solder systems Infrared and hot air reflow suitable for lead-free Vibration In accordance IEC 68-2-64 Shock In accordance to IEC 68-2-27, 100 g PACKAGING Packaging style Packaging size A float mount production test adaptor is available by request. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com Tape and reel to EIA-481 8000 per reel I-39 I RF • Small size / low profile saving space on PCB • High mating cycles on accessory port • Switchable • High force on the switch providing more robust connection • Robust design • Latching mechanism for ease-of-use during bench testing • Compatible with lead free soldering • Designed for pick and place • Cradle interface incorporates patented ball - enables angular misalignment without loss to performance • Compliant with WEEE and RoHS directives Mini RF Series ca_I1-I40.qxd:Layout 1 2/10/11 8:44 AM Page 40 Mini RF 2.70 ORIENTATION FEATURE 1.40 Ground Pads 2.70 2.70 1.30 0.35 0.85 2.70 2.90 1.00 0.03 +0.05 -0.05 COPLANARITY 0.10 PICK AND PLACE FACE SUGGESTED NOZZLE 2.5 O/D 1.0 MAX I/D 0.60 120220-0180 Cradle Interface Solder Resist 0.35 0.40 0.85 2.49 0.55 Signal Pads 0.82 RF 0.82 Accessories 21.98 ø3.40 MAX MATED 5.45 3.00 8.00 ø7 .0 0 ø4.82 5.95 SMA INTERFACE 120220-0175 Snap-on Bench Test Adaptor Snap-on mated ø1 17.50 UNMATED 16.5 TYP MATED FLANGE FOR TEST HEAD MOUNTING 8.00 2.50 R1 .00 ø 6.00 ø 3.00 4.12 6.14 R 8.75 UNMATED 7.05 MATED 1.00 9.00 0.00 ø1 11.15 UNMATED 10.15 MIN MATED 120220-0177 Cradle Connector (Capability) 9.00 Ball Nose mated R 1.0 0 120220-0176 Ball Nose Production Test Adaptor SMA INTERFACE 7.95 SPANNER FLATS ø 2.60 ø 7.50 I ANTENNA CONTACT # 2 RADIO CONTACT # 1 Dimensions shown in inches (mm) Specifications and dimensions subject to change I-40 www.ittcannon.com