Resource

ca_A1-A163.qxd:Layout 1
2/9/11
7:48 PM
Page 1
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 130
Cannon VG/CA-Bayonet
Circular
A
Introduction
Connector Design
Cannon CA-Bayonet series was designed in accordance with
the VG95234 specification. This versatile and highly reliable
connector series is an improvement on the well established
MIL-C-5015 series. CA-Bayonet has a proven “reverse bayonet”
coupling design that offers exceptional vibration protection, by a
simple 120° turn.
Due to the rugged shell made of an aluminium alloy, these
connectors withstand most severe conditions. Olive drab
chromate coating over cadmium plating protects the surface of
the shell.
Cannon offers two plating solutions to customers refusing
cadmium plating. Zinc cobalt green offers similar properties like
cadmium plating while zinc cobalt black is RoHS compliant.
Initially designed for aircraft and airborne applications, these
rugged connectors are used in the electrical equipment of various off-road vehicles, construction machinery, industrial devices,
railroad and military wheelers.
Over 180 contact arrangements are available for 1 to 65 circuits
and up to 245 A per unit.
The insulators are made of high quality polychloroprene and
withstand temperatures from -67°/+257°F (-55/125°C). This
material is self-extinguishing, resistant against hydraulic fluids,
jet fuel, diesel fuel, gasolines, lubricants, brake and fire
extinguisher fluids (short wetting only). In case of lifetime
moistening ITT Cannon offers FKM insulators as an alternative.
Connectors in accordance with VG95234 are interchangeable
with the corresponding MIL-C-5015 connectors. Both connector
lines feature the same shell dimensions and contacts layouts.
However, due to the different coupling systems (MIL-C-5015
threaded coupling, VG95234 bayonet coupling) they are not
intermateable.
The contacts are made of copper alloy plated with a hard silver
finish guarantee at least 500 mating cycles. There are solder,
crimp and PCB contacts in place. The crimp contacts offer a
comprehensive range of termination reductions. All solder
contacts feature a special passivation to comply with ROHS
requirements. The crimp contacts allow highly reliable crimping
with wires when using the recommended tools according to
VG95234. Crimp contacts can be exchanged at least five times
still preserving specified contact retention.
Advantages
– rugged shell design
– environmental
– bayonet coupling for easy mating and unmating
– vibration proof
– waterproof up to 1 bar (35 feet of water)
Cannon has the complete VG95234 program available and, in addition, many other types which exceed the requirements of
VG95234 and MIL-C-5015.
The coupling unit is featured by the Cannon roller bolts made
of stainless steel actually rolling down the mating ramps, thus
reducing coupling force by the operator. In addition, the
Cannon design employs two coupling nut versions for different
application cases, with and without wavespring and washer.
The version without wavespring guarantees perfect sealing
while the other version stands up to high vibration levels.
The bayonet design allows fast and easy coupling and
uncoupling. An audible control by metallic sound and
visual control by colour-marked snap-in position offer
additional coupling security.
Attention:
Metal shell connectors which may be touched are not
suitable for mains power.
Restrictions:
* European Community “Old Car” directive (2000/53/EG)
* European Community Waste Electrical and Electronic Equipment (WEEE)
2000/0158
* European Community restrictions of use of certain hazardous substances
in WEEE (ROS) (2000/0159)
VG connectors are basically designed for single wire harnessing.
For full environmental sealing each conductor is sealed completely within the grommet. However, Cannon offers as an
alternative O-ring sealed PG and
metric gland adaptors for faster
harnessing standing up to the same
sealing level than the VG types.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-130
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:50 PM
Page 131
Cannon VG/CA-Bayonet
Electrical Data
Contact rating at 68 °F (+20 °C)
Contact size
Contact resistance
(Millivolt test)
10
16S/15S
16/15
12/25
8/60/100
4/160
0/500
The contact resistance has to be tested according to VG95234
part 2, test no. 5.10.1 and VG 95210, part 37. The measuring
points are indicated in the illustration.
--Contact size
metric
10
15S/15
25
60/100
160
500
Current rating
depending on ambient temperature
Current [A]
Derating Curves according to VG 95234
250
240
230
220
210
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
Contact size 500/ 0, wire size 50mm²/ AWG0
Contact size 160/ 4; wire size 16mm²/ AWG4
Contact size 60/ 100/ 8; wire size 60/ 100mm²/
AWG8
Contact size 25/ 12; wire size 2,5mm²/ AWG12
Contact size 15/ 15s/ 16/ 16s; wire size 1,5mm²/
AWG16
Contact size 10/ 20; wire size 0,75/ 1,0mm²
20
30
40
50
60
70
80
90
100
110
120
A
AWG
–
16S/16
12
8
4
0
Insulation resistance
Acc. to VG95319, part 2, test no. 5.12 and VG95210, part 32,
test condition B
Standard insulator material
> 1000 MΩ
FKM insulator material (upon request)
> 5000 MΩ
Test voltage
Acc. to VG95319, part 2, test no. 5.13 and VG 95210, part 31
Test voltage for service rating:
Service rating
Instruments
A
B
D
E
130
Ambient Temperature [°C]
Max. contact
resistance
mΩ
12
6
3
1
0,5
0,2
Test voltage Vrms
1050
1600
4000
2500
3000
Air and creepage paths (min.)
Current [A]
Derating Curves ITT-Cannon
330
320
310
300
290
280
270
260
250
240
230
220
210
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
Contact size 500; wire size 50mm²
Contact size 160, wire size 16mm²
Contact size 100; wire size 10mm²
Contact size 60; wire size 6mm²
Voltage class
Instr.
A
D
E
Air and creepage paths mm
0,7
1,1
2,8
4,8
Operating voltage and connector usage
Connectors in equipments must not be separated or mated
under load when used per specifications.
20
30
40
50
60
70
80
90
100
110
120
As according to specification the connectors are suitable for an
operating voltage of 50 V (see Product Safety Information).
However, this is only valid, when the connectors are freely
accessible during operation and consequently might be
touchable. When the connectors will be operated with line
voltage, please contact ITT Customer Service for an alternative
connector solution.
130
Ambient Temperature [°C]
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-131
Circular
max. current
A
8
22
22
41
74
135
245
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 132
Cannon VG/CA-Bayonet
Mechanical Features
Circular
A
Coupling torque
Ambient temperature
Standard insulator material
–55°/125°C (– 67/257°F)
The allowable coupling torques have to be tested under full
bundle conditions of the connectors to VG95319, part 2, test no.
5.8.2.
FKM insulator material*
–30°/200°C (– 22/392°F)
Shell
size
Safety provisions**
IP 67 acc. to DIN 40 050
(1 bar pressure after 16 hrs.)
10SL
12S
14S
16S/16
18
20
22
24
28
32
36
Vibration test
200 m/s2 at 10 to 2000 Hz
Mating cycles
500 min.
Withdrawal force per contact.
The corresponding withdrawal force has to be measured
according to VG95319, part 2, test no. 5.7. and
DIN EN60512-16-5 using the required test gage.
Contact size
metric
10
15S/15
25
60/100
160
500
AWG
–
16S/16
12
8
4
0
Separating force min.
N
Gage
0,3
G 0,99
1,0
G 1,56
1,5
G 2,36
3,0
G 3,58
4,0
G 5,69
8,5
G 9,04
Allowable coupling torque
closing and opening
Nm max.
1,7
2,5
3,6
5,5
8
9
11
14
17
19
23
Opening
Nm min.
0,15
0,23
0,35
0,46
0,58
0,7
0,8
0,8
0,92
1,03
1,03
Contact retention
The contact retention has to be tested according to VG95319,
part 2, test no. 5.4. Test force direction = Mating direction.
Contact
size
10
15S/15
25
60/100
160
500
Gage
(see also VG 95234, Part 1)
AWG
–
16S/16
12
8
4
0
Test force
N
30
35
55
80
90
95
Materials
Gage
G 0,99
G 1,56
G 2,36
G 3,58
G 5,69
G 9,04
Contact diameter d
+0,01
0,99
1,56
2,36
3,58
5,69
9,04
L
–1
7
9
12
13
13
13
Shell
Standard finish
Aluminum alloy
Olive drab chromate coating over
cadmium plating
Alternative finish
Zinc cobalt (see page A-134
Modification)
Insulator
and grommets
Polychloroprene (Standard)
FKM (High temperature and
aggressive oils)*
Contacts
Standard finish
Special finish
Copper alloy
Hard silver
A176 nickel and hard gold plating
** upon request
** Longitudinal sealing: The connector is not sealed against fluids entering
through the cable, as the sealing lips of the single wire sealing are pressing
against the jacket of the individual conductors.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-132
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 133
Cannon VG/CA-Bayonet
How to order
VG Order reference
Cannon Order reference
VG 95234 A
–
32 – 6
S
1 N
CA 3106 E 18 – 1
Series
Shell style
Shell style
Dash
Class
Shell size
Shell size
Contact arrangement
Contact arrangement
Contact type
Contact type
Contact termination
Insulator position
Insulator position
Connectors with bayonet coupling
Explanation
Dash
Series
VG 95234
Modification
Shell style
N1, N2 – wall mounting receptacle
A, B1, B2 – box mounting receptacle
D, G, H, M – straight plug
Explanation
Series
CA
Shell size
10SL, 14S, 16S, 16, 18, 20, 22,
24, 28, 32 and 36
Shell style
Contact arrangement
see pages A-135 and A-136
Contact type
P – Pin contact
S – Socket contact
3100 –
3101 –
3102 –
3105 –
Contact termination
without identification –
contacts for metric wire sizes
identification 1* –
contact for AWG wire sizes
Class
E
Insulator position
See CA-Bayonet Catalog
Accessories acc. to VG
Dummy receptacles
Gaskets, front mount
Gaskets, rear mount
Protecting caps
Protecting caps
Cabel caps
Bushing
VG95234 BOD
VG95234 DA
VG95234 DH
VG95234 KR
VG95234 KB
VG95234 KK
VG95234 KT
Shell size
Contact
arrangement
Contact type
X
B
– ***
– Circular connectors with bayonet
coupling
Waåll mounting receptacle
Cable connecting plug
Box mounting receptacle
Dummy receptacle for front and
panel mounting
3106 – Plug, straight
3108 – Plug, 90°
TBF – Bulkhead receptacle
– environmental with resilient
insulators and endbell with clamp
and bushing
F
– environmental with resilient
insulator and endbell for flex tube
R
– environmental with resilient
insulator and shortened light-weight
endbell without cable clamp
10SL, 12S, 14S, 16S, 16, 18, 20,
22, 24, 28, 32 and 36
See 5015 section plus full CA-B catalog
P
S
PS
– Pin
– Socket
– one side pin, one side socket
(only for TBF)
Insulator position Besides the normal position further insulator
positions are possible for Cannon connectors
(see CA-Bayonet Catalog) to prevent mismating. Polarization is achieved by turning the pin
contact insulator clockwise towards the shell,
the socket insulator, however, in opposite
clockwise direction. This information refers to
the mating side of the contact insulator.
Modification
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-133
A
Circular
Series
S
see next page A-134
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 134
Cannon VG/CA-Bayonet
With Spring Washer and Friction Ring
Modification 01
(only for CA......-B) 02
– metric crimp contacts
– adapter for heat shrink boots
AWG crimp contacts
03
– adapter for heat shrink boots,
metric contacts
04
– rear mount, thread in flange,
metric crimp contacts (CA3102)
05
– rear mount, through holes in flange,
(CA3100, CA 3102, CA 20, TBF)
06
– shrink boot adapter, thread holes
in flange, solder pot contacts
08
– angular endbell, through holes in
flange (for CA3100 only)
09
– angular endbell, through holes in
flange (for CA3100 only)
13
– shielded version, solder contacts
14
– shielded version, metric crimp contacts
15
– shielded version, AWG crimp contacts
41
– shielded version, heat shrink boot
adapter
109 – rear mount, F80 contacts, threaded
holes (CA3102 only)
111 – rear mount, solder pot contacts,
threaded holes, (CA3102 only)
A176 – gold plated contacts
A232 – Zinc cobalt black
A233 – Zinc cobalt green
F0
– less contacts, contacts to be
ordered separately
see pages A-146, A147
F42 – less grommet and backshell
F80 – AWG crimp contacts
Circular
A
These connectors feature a spring washer and a friction ring
under the coupling nut.
Advantage
Ordering example
CA06EW
CA06FW
CA06RW
CA08EW/FW
Vibrations are being compensated
according performance class insert
„W“ after Class E, F or R
– connector with spring washer, endbell
with cable and bushing
– connector with spring washer, endbell
for flex tube
– connector with spring washer and short
endbell
– connector with spring washer and
90° endbell
The connectors acc. to VG95234 are generally delivered with
spring washer.
Other Shell Styles (see full CA-B catalog)
CA3100E-B-02/03/06
CA3100F-B-08/09
CA3100E-B-08/09
CA06PG-B
CA06ME-B
CA3101F-B-08/09
CA02L-B
CA20L-B
CA07A-B
– adapter for heat shrink boot
– 90° endbell for flex tube
– 90° endbell, cable clamp and bushing
– adapter for PG glands
– adapter for metric glands
– 90° endbell flex tube
– receptacle with pcb solder contacts
– rear mount receptacle with pcb solder
contacts
– jam nut receptacle
Important!
When connectors are requested according to VG 95234
modification, e. g. with another finish, with other contact arrangements and solder contacts, they are to be ordered only with the ITT
Cannon order reference.
Connectors acc. to VG95234 are generally available with insert
positions X and Y only.
VG order reference with modification is not possible (except F0-less
contacts).
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-134
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 135
Cannon VG/CA-Bayonet
Contact Arrangements
No. of
contacts
12S4
14S4
16-12
18-6
18-7
20-2
22-7
1
1
1
1
1
1
1
10SL4
14S9
16S4
16-11
16A11
18-3
20-23
22-1
22-8
24-9
32-5
2
2
2
2
2
2
2
2
2
2
2
10SL3
14S1
14S7
16S5
16-7
16-10
18-5
18-21
18-22
20-6
20-19
22-2
22-9
22-21
3
3
3
3
3
3
3
3
3
3
3
3
3
3
12SA10
14S2
16-9
18-4
18-10
18-13
20-4
20-24
22-4
22-10
22-22
22B22
24-4
24-22
32-17
36-5
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Contact size
0
4
500
160
8
100
60
12
25
16
15
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
20
10
Contact
arrangement
No. of
contacts
14S5
16S8
18-11
18-20
22-12
24-12
28-5
32-1
5
5
5
5
5
5
5
5
14S6
18-12
20-8
20-22
22-5
22-15
28-22
36-3
36-6
6
6
6
6
6
6
6
6
6
14SA7
16S1
18-9
18-17
20-15
22-28
24-2
24-10
24-27
28-10
7
7
7
7
7
7
7
7
7
7
18-8
20-7
22-23
32-15
36A35
8
8
8
8
8
20-16
20-18
20A9
22-16
22-20
22-27
24-11
28A16
9
9
9
9
9
9
9
9
18-1
18-19
28-19
10
10
10
4
10
10
6
20-33
24-20
11
11
2
11
9
8
100
60
12
25
16
15
5
5
5
5
3
2
2
2
3
1
3
2
2
3
2
5
3
3
2
2
6
6
4
3
4
1
3
3
4
2
3
3
3
3
2
1
3
2
3
1
3
3
3
3
3
1
2
2
1
2
2
4
4
2
4
4
3
4
2
2
2
2
7
7
7
7
7
5
5
7
7
2
2
3
1
7
8
8
6
2
4
4
2
3
9
3
1
3
7
6
6
9
8
6
4
5
4
4
4
1
3
4
4
4
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Contact size
0
4
500
160
A-135
20
10
A
Circular
Contact
arrangement
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 136
Cannon VG/CA-Bayonet
Contact Arrangements
Circular
A
Contact
arrangement
No. of
contacts
Contact size
0
4
500
160
24-19
24A24
28-9
28-51
12
12
12
12
20-11
13
13
20-27
22-19
28-2
28-20
32-9
14
14
14
14
14
14
14
12
4
12
24-5
24-7
36-14
16
16
16
20-29
17
17
20A48
22-14
19
19
19
19
28-16
20
20
28-11
22
32-6
32-13
23
23
24-28
24
24
28-12
26
26
36A46
27
27
24A28
28A63
28
28
9
28
19
32-8
30
6
24
36-9
31
14
14
28-15
32-7
36-15
35
35
35
7
35
28
35
28-21
37
36A98
39
8
100
60
12
25
12
6
12
2
10
2
5
2
1
3
2
2
5
Contact
arrangement
No. of
contacts
12
28A51
43
6
32A47
36-7
36-8
47
47
47
36-10
48
48
36A34
52
52
32A10
54
54
32A55
55
55
32A69
61
20
41
36A99
65
15
50
16
15
16
14
6
4
18
2
5
16
18
20
10
Contact size
0
4
500
160
8
100
60
12
25
16
15
20
10
43
7
1
47
40
46
Most layout illustrations are shown in the MIL-C-5015 section
on pages A-85 to A-88 or in the full CA-B catalog.
37
8
31
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-136
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 137
Cannon VG/CA-Bayonet
Box Mounting Receptacle
VG 95234 – Style A
A
CA 3102E-B and Modifications, see page A-134
VG95234
Cannon
Part no.
Part no.
VG95234A-10SL
CA3102E10SL-**-B
–
CA3102E12S-**-B
VG95234A-14S
CA3102E14S-**-B
VG95234A-16S
CA3102E16S-**-B
VG95234A-16
CA3102E16-**-B
VG95234A-18
CA3102E18-**-B
VG95234A-20
CA3102E20-**-B
VG95234A-22
CA3102E22-**-B
VG95234A-24
CA3102E24-**-B
VG95234A-28
CA3102E28-**-B
VG95234A-32
CA3102E32-**-B
VG95234A-36
CA3102E36-**-B
1) Weight without insulator
d1
max.
0.64 (16,2)
0.64 (16,2)
0.75 (19,2)
0.88 (22,4)
0.88 (22,4)
1.01 (25,6)
1.14 (29,0)
1.27 (32,2)
1.34 (35,3)
1.63 (41,4)
1.88 (47,8)
2.07 (52,6)
d2
H13
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.14 (3,7)
0.14 (3,7)
0.17 (4,3)
0.17 (4,3)
Circular
Receptacle for front panel mounting with square flange.
Threaded holes in flange not possible.
d3
–0,15
0.72 (18,2)
0.84 (21,4)
0.97 (24,6)
1.03 (27,4)
1.03 (27,4)
1.21 (30,8)
1.35 (34,2)
1.47 (37,4)
1.61 (40,9)
1.83 (46,7)
2.10 (53,4)
2.35 (59,6)
CA02L-B designates a receptacle for front panel mounting
with solder pin contacts to solder into printed circuits. All
pattern drawings upon request. For all other dimensions see
above table.
For contact arrangements with #16S and #16 contacts only.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-137
e
±0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
l1
±0,3
0.97 (24,7)
0.97 (24,7)
0.97 (24,7)
0.97 (24,7)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
l2
+0,4
0.56 (14,2)
0.56 (14,2)
0.56 (14,2)
0.56 (14,2)
0.75 (19,0)
0.75 (19,0)
0.75 (19,0)
0.75 (19,0)
0.81 (20,6)
0.81 (20,6)
0.87 (22,2)
0.87 (22,2)
l3
±0,2
0.11 (2,8)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
l4
±0,3
1.00 (25,4)
1.10 (28,0)
1.18 (30,0)
1.28 (32,5)
1.28 (32,5)
1.38 (35,0)
1.50 (38,0)
1.61 (41,0)
1.75 (44,5)
2.00 (50,8)
2.24 (57,0)
2.50 (63,5)
Weight1)
g max.
12
15
17
19
22
28
33
38
46
52
64
80
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 138
Cannon VG/CA-Bayonet
Box Mounting Receptacle
A
VG95234 Style B1 (with threaded holes in flange)
Circular
CA3102-B and Modifications, e g -04, -109 or -111; 05
CA3102-B designates a receptacle with square flange
for rear panel mounting.
VG95234 Style B2 (with through holes in flange)
CA3102E-B and Modifications, see page A-134
Style B2
VG95234
Part no.
Cannon
Part no.
VG95234XX-10SL-* CA3102E10SL-*B-***
–
CA3102E12S-*B-***
VG95234XX-14S-*
CA3102E14S-*B-***
CG95234XX-16S-*
CA3102E16S-*B-***
VG95234XX-16-*
CA3102E16-*B-***
VG95234XX-18-*
CA3102E18-*B-***
VG95234XX-20-*
CA3102E20-*B-***
VG95234XX-22-*
CA3102E22-*B-***
VG95234XX-24-*
CA3102E24-*B-***
VG95234XX-28-*
CA3102E28-*B-***
VG95234XX-32-*
CA3102E32-*B-***
VG95234XX-36-*
CA3102E36-*B-***
1) Weight without insulator
d1
max.
0.64 (16,2)
0.64 (16,2)
0.75 (19,2)
0.88 (22,4)
0.88 (22,4)
1.01 (25,6)
1.14 (29,0)
1.27 (32,2)
1.34 (35,3)
1.63 (41,4)
1.88 (47,8)
2.07 (54,1)
d2
B1
H13
M4
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
B2
d3
–0,15
e
±0,1
l1
±0,3
l2
+0,4
l3
±0,2
l4
±0,3
Weight1)
g max.
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.14 (3,7)
0.14 (3,7)
0.17 (4,3)
0.17 (4,3)
0.72 (18,2)
0.84 (21,4)
0.97(24,6)
1.08 (27,4)
1.08 (27,4)
1.21 (30,8)
1.35 (34,2)
1.47 (37,4)
1.61 (40,9)
1.83 (46,7)
2.10 (53,4)
2.35 (59,6)
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
0.97 (24,7)
0.97 (24,7)
0.97 (24,7)
0.97 (24,7)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
1.33 (33,8)
0.72 (18,2)
0.72 (18,2)
0.72 (18,2)
0.72 (18,2)
0.85 (21,5)
0.91 (23,05)
0.91 (23,05)
0.91 (23,05)
0.91 (23,05)
0.95 (24,05)
0.95 (24,05)
0.95 (24,05)
0.11 (2,8)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
1.00 (25,4)
1.10 (28,0)
1.18 (30,0)
1.28 (32,5)
1.28 (32,5)
1.38 (35,0)
1.50 (38,0)
1.61 (41,0)
1.75 (44,5)
2.00 (50,8)
2.24 (57,0)
2.50 (63,5)
14
18
21
22
27
33
37
42
48
58
72
84
CA20L-B designates a receptacle for rear panel mounting
with solder pin contacts to solder into printed circuits. All
pattern drawings upon request. For all other dimensions see
above table.
For contact arrangements with #16S and #16 contacts only.
Mod. -05
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-138
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 139
Cannon VG/CA-Bayonet
Straight Plug
A
CA3106E-B designates a straight plug with endbell,
cable clamp and telescoping bushing
Circular
VG 95234 Style D resp.
CA3106E-B and Modifications, see page A-134
VG
E
VG/CA
E1/F
VG95234
Part no.
VG95234D-10SL-*
Cannon
Part no.
CA3106E10SL-**B-***
CA3106E12S-**B-***
CA3106E14S-**B-***
CA3106E16S-**B-***
CA3106E16-**B-***
CA3106E18-**B-***
CA3106E20-**B-***
CA3106E22-**B-***
CA3106E24-**B-***
CA3106E28-**B-***
CA3106E32-**B-***
CA3106E36-**B-***
VG95234D-14S-*
VG95234D-16S-*
VG95234D-16-*
VG95234D-18-*
VG95234D-20-*
VG95234D-22-*
VG95234D-24-*
VG95234D-28-*
VG95234D-32-*
VG95234D-36-*
1) Weight without insulator, grommets and contacts.
d1
d22)
max.
max.
0.90 (22,8)
0.26 (6,5)
1.02 (26,0)
0.26 (6,5)
1.15 (29,2)
0.350(9,0)
1.26 (32,0)
0.43 (11,0)
1.26 (32,0)
0.43 (11,0)
1.44 (36,5)
0.56 (14,2)
1.57 (39,9)
0.62 (15,8)
1.70 (43,1)
0.62 (15,8)
1.83 (46,6)
0.84 (21,4)
2.10 (53,4)
0.84 (21,4)
2.37 (60,1)
1.05 (26,7)
2.61 (66,3)
1.25 (31,7)
2) For max. cable entry.
l1
max.
4.53 (115)
4.53 (115)
4.53 (115)
4.53 (115)
4.72 (120)
4.72 (120)
4.72 (120)
4.72 (120)
4.72 (120)
4.72 (120)
4.72 (120)
5.12 (130)
l2
max.
2.16 (55)
2.16 (55)
2.36 (60)
2.36 (60)
2.76 (70)
2.95 (75)
2.95 (75)
2.95 (75)
3.54 (90)
3.54 (90)
3.54 (90)
3.94 (100)
Weight1)
g max.
30
37
44
54
62
70
85
92
127
154
199
260
l3
max.
0.89 (22,7)
0.89 (22,7)
1.08 (27,5)
1.18 (30,0)
1.18 (30,0)
1.30 (33,0)
1.48 (37,5)
1.48 (37,5)
1.70 (43,3)
1.89 (48,0)
2.16 (55,0)
2.28 (58,0)
Plug 90º
VG 95234 Style E1 (with flex tube)
CA 3108 F-B and Modifications, see page A-134
CA3108E/F designates a plug 90°, which is available
with cable clamp and bushing (E) or with flex tube
termination (F)
VG 95234 Style E (with cable clamp and telescoping
bushing)
VG/CA
E1/F
CA 3108E-B and Modifications, see page A-134
VG 95 234
Part no.
Cannon
Part no.
d3-Thread
Style E1
CA3108F
5/8-24NEF-2A
5/8-24NEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1 3/16-18UNEF-2A
1 3/16-18UNEF-2A
1 7/16-18UNEF-2A
1 7/16-18UNEF-2A
1 3/4 -18UNS-2A
2 -18UNS-2A
VG95234XX-10SL-* CA3108X10SL-**B-***
–
CA3108X12S-**B-***
VG95234XX-14S-* CA3108X14S-**B-***
VG95234XX-16S-* CA3108X16S-**B-***
VG95234XX-16-* CA3108X16-**B-***
VG95234XX-18-* CA3108X18-**B-***
VG95234XX-20-* CA3108X20-**B-***
VG95234XX-22-* CA3108X22-**B-***
VG95234XX-24-* CA3108X24-**B-***
VG95234XX-28-* CA3108X28-**B-***
VG95234XX-32-* CA3108X32-**B-***
VG95234XX-36-* CA3108 36-**B-***
1) Weight without insulator, grommets and contacts.
d1
max.
d22)
max.
l1
max.
0.90 (22,8) 0.25 (6,5)
1.02 (26,0) 0.25 (6,5)
1.15 (29,2) 0.35 (9,0)
1.26 (32,0) 0.43 (11,0)
1.26 (32,0) 0.43 (11,0)
1.44 (36,5) 0.56 (14,2)
1.57 (39,9) 0.62 (15,8)
1.70 (43,1) 0.62 (15,8)
1.83 (46,6) 0.84 (21,4)
2.10 (53,4) 0.84 (21,4)
2.37 (60,1) 1.05 (26,7)
2.61 (66,3) 1.25 (31,7)
2) For max. cable entry.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-139
1.77 (45)
1.77 (45)
1.85 (47)
1.89 (48)
2.24 (57)
2.28 (58)
2.40 (61)
2.40 (61)
2.60 (66)
2.60 (66)
2.83 (72)
2.95 (75)
l2
max.
E
1.65 (42)
1.65 (42)
1.65 (42)
1.77 (45)
1.77 (45)
2.09 (53)
2.09 (53)
2.09 (53)
2.28 (58)
2.28 (58)
2.60 (66)
2.71 (69)
l3
max.
E1
1.18 (30)
1.18 (30)
1.18 (30)
1.18 (30)
1.18 (30)
1.38 (35)
1.38 (35)
1.38 (35)
1.57 (40)
1.57 (40)
1.77 (45)
1.97 (50)
l4
max.
E
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
4.33 (110)
4.33 (110)
l5
0.89 (22,7) 0.37 (9,4)
0.89 (22,7) 0.37 (9,4)
1.08 (27,5) 0.37 (9,4)
1.18 (30,0) 0.37 (9,4)
1.18 (30,0) 0.37 (9,4)
1.30 (33,0) 0.37 (9,4)
1.48 (37,5) 0.37 (9,4)
1.48 (37,5) 0.37 (9,4)
1.70 (43,3) 0.37 (9,4)
1.70 (43,3) 0.37 (9,4)
2.04 (51,7) 0.43 (11,0)
2.28 (58,0) 0.50 (12,6)
Weight1)
g max.
E
E1
37
27
45
35
58
43
68
48
78
58
90
58
109
74
113
78
159 104
181 126
245 160
300 190
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 140
Cannon VG/CA-Bayonet
Straight Plug
A
VG95234 – Style G
Circular
CA3106E-B, -02, -03 or -06 designates a
straight plug with adapter for heat shrinkable boots
CA3106E-B and Modificationes, see page A-134
VG 95234
Cannon
Part no.
Part no.
VG95234G-10SL-*
CA3106E10SL-**B-***
–
CA3106E12S-**B-***
VG95234G-14S-*
CA3106E14S-**B-***
VG95234G-16S-*
CA3106E16S-**B-***
VG95234G-16-*
CA3106E16-**B-***
VG95234G-18-*
CA3106E18-**B-***
VG95234G-20-*
CA3106E20-**B-***
VG95234G-22-*
CA3106E22-**B-***
VG95234G-24-*
CA3106E24-**B-***
VG95234G-28-*
CA3106E28-**B-***
VG95234G-32-*
CA3106E32-**B-***
VG95234G-36-*
CA3106E36-**B-***
1) Weight without insulator, grommets and contacts.
d1
max.
0.90 (22,8)
1.02 (26,0)
1.15 (29,2)
1.26 (32,0)
1.26 (32,0)
1.44 (36,5)
1.57 (39,9)
1.70 (43,1)
1.83 (46,6)
2.10 (53,4)
2.37 (60,1)
2.61 (66,3)
d2
±0,2
0.67 (17,0)
0.70 (17,8)
0.79 (20,1)
0.93 (23,5)
0.93 (23,5)
1.04 (26,5)
1.19 (30,2)
1.32 (33,6)
1.50 (38,1)
1.63 (41,4)
1.91 (48,6)
2.16 (54,8)
d3
±0,2
0.61 (15,5)
0.61 (15,5)
0.75 (19,1)
0.94 (23,9)
0.94 (23,9)
0.94 (23,9)
1.17 (29,6)
1.17 (29,6)
1.49 (37,8)
1.49 (37,8)
1.88 (47,8)
1.88 (47,8)
d4
max.
0.52 (13,3)
0.52 (13,3)
0.67 (17,0)
0.86 (21,9)
0.86 (21,9)
0.86 (21,9)
1.03 (26,2)
1.03 (26,2)
1.36 (34,5)
1.36 (34,5)
1.72 (43,6)
1.72 (43,6)
d5
min.
0.30 (7,7)
0.31 (7,9)
0.42 (10,6)
0.53 (13,5)
0.53 (13,5)
0.57 (14,6)
0.74 (18,7)
0.82 (20,8)
0.97 (24,6)
1.06 (27,0)
1.31 (33,3)
1.52 (38,5)
l1
max.
1.97 (50)
1.97 (50)
1.97 (50)
1.97 (50)
2.36 (60)
2.36 ((60)
2.56 (65)
2.56 (65)
2.56 (65)
2.56 (65)
2.76 (70)
3.15 (80)
l2
±0,5
0.46 (11,7)
0.46 (11,7)
0.46 (11,7)
0.46 (11,7)
0.46 (11,7)
0.46 (11,7)
0.50 (12,7)
0.50 (12,7)
0.50 (12,7)
0.50 (12,7)
0.60 (15,2)
0.60 (15,2)
Weight1)
g max.
24
35
41
51
58
65
75
80
95
120
165
180
Straight Plug
VG95234 Style H
CA3106-F-B designates a straight plug for flex tube
CA3106-B and Modifications, see page A-134
VG 95234
Cannon
Part no.
Part no.
VG95234H-10SL-*
CA3106F10SL-**B-***
–
CA3106F12S-**B-***
VG95234H-14S-*
CA3106F14S-**B-***
VG95234H-16S-*
CA3106F16S-**B-***
VG95234H-16-*
CA3106F16-**B-***
VG95234H-18-*
CA3106F18-**B-***
VG95234H-20-*
CA3106F20-**B-***
VG96234H-22-*
CA3106F22-**B-***
VG95234H-24-*
CA3106F24-**B-***
VG95234H-28-*
CA3106F28-**B-***
VG95234H-32-*
CA3106F32-**B-***
VG95234H-36-*
CA3106F36-**B-***
1) Weight without insulator, grommets and contacts.
d3-Thread
5/8-24NEF-2A
5/8-24NEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
7/8-20UNEF-2A
1-20UNEF-2A
1 3/16-18UNEF-2A
1 3/16-18UNEF-2A
1 7/16-18UNEF-2A
1 7/16-18UNEF-2A
1 3/4-18UNS-2A
2-18UNS-2A
2) For max. cable entry.
d1
max.
0.90 (22,8)
1.02 (26,0)
1.15 (29,2)
1.18 (32,0)
1.18 (32,0)
1.44 (36,5)
1.57 (39,9)
1.70 (43,1)
1.83 (46,6)
2.10 (53,4)
2.37 (60,1)
2.61 (66,3)
d2a2)
0.32 (8,2)
0.32 (8,2)
0.44 (11,1)
0.56 (14,3)
0.56 (14,3)
0.66 (16,7)
0.78 (19,8)
0.78 (19,8)
1.00 (25,4)
1.06 (27,0)
1.28 (32,5)
1.40 (35,7)
l1
max.
1.97 50)
1.97 (50)
1.97 (50)
1.97 (50)
2.36 (60)
2.36 (60)
2.36 (60)
2.36 (60)
2.56 (65)
2.56 (65)
2.56 (65)
3.15 (80)
l2
min.
0.37 (9,5)
0.37 (9,5)
0.37 (9,5)
0.37 (9,5)
0.37 (9,5)
0.37 (9,5)
0.37 (9,5)
0.37 (9,5)
0.37 (9,5)
0.37 (9,5)
0.43 (11,0)
0.46 (11,8)
Weight1)
g max.
21
29
33
42
51
59
59
62
84
100
116
142
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-140
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 141
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
For rear mounting
A
VG95234 Style J1 (with threaded holes in flange)
VG95234 Style J2 (with through holes in flange)
Circular
CA3100E-B and Modifications e g -05
(with through holes)
CA3100E-B designates a wall mounting
receptacle with cable clamp and telescoping
bushing
CA3100E-B and Modifications e g -01, -F80
(for ordered contacts)
VG95234
Cannon
Part no.
Part no.
VG95234*XX-10SL-* CA3100E10SL-**-B-***
–
CA3100E12S-**-B-***
VG95234*XX-14S-* CA3100E14S-**-B-***
VG95234*XX-16S-* CA3100E16S-**-B-***
VG95234*XX-16-*
CA3100E16-**-B-***
VG95234*XX-18-*
CA3100E18-**-B-***
VG95234*XX-20-*
CA3100E20-**-B-***
VG95234*XX-22-*
CA3100E22-**-B-***
VG95234*XX-24-*
CA3100E24-**-B-***
VG95234*XX-28-*
CA3100E28-**-B-***
VG95234*XX-32-*
CA3100E32-**-B-***
VG95234*XX-36-*
CA3100E36-**-B-***
1) For max. cable entry.
d1
-0,15
0.72 (18,2)
0.84 (21,4)
0.97 (24,6)
1.08 (27,4)
1.08 (27,4)
1.21 (30,8)
1.35 (34,2)
1.47 (37,4)
1.61 (40,9)
1.84 (46,7)
2.10 (53,4)
2.35 (59,6)
d21)
0.26 (6,5)
0.26 (6,5)
0.35 (9,0)
0.43 (11,0)
0.43 (11,0)
0.56 (14,2)
0.62 (15,8)
0.62 (15,8)
0.84 (21,4)
0.84 (21,4)
1.05 (26,7)
1.25 (31,7)
J1
M4
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
d3
J2
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.15 (3,7)
0.15 (3,7)
0.17 (4,3)
0.17 (4,3)
e
±0,1
18,2
20,6
23,0
24,6
24,6
27,0
29,4
31,8
34,9
39,7
44,5
49,2
L1
max.
2.24 (57)
2.24 (57)
2.32 (59)
2.36 (60)
2.68 (68)
2.83 (72)
2.83 (72)
2.83 (72)
3.07 (78)
3.11 (79)
3.07 (78)
3.07 (78)
L2
+0,4
0.72 (18,2)
0.72 (18,2)
0.72 (18,2)
0.72 (18,2)
0.85 (21,5)
0.91 (23,05)
0.91 (23,05)
0.91 (23,05)
0.91 (23,05)
0.95 (24,05)
0.95 (24,05)
0.95 (24,05)
L3
±0,2
0.11 (2,8)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.13 (3,2)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
0.16 (4,0)
L4
±0,3
1.00 (25,4)
1.10 (28,0)
1.18 (30,0)
1.28 (32,5)
1.28 (32,5)
1.38 (35,0)
1.50 (38,0)
1.61 (41,0)
1.75 (44,5)
2.00 (50,8)
2.24 (57,0)
2.50 (63,5)
l5
max.
4.72 (120)
4.72 (120)
4.72 (120)
4.72 (120)
4.92 (125)
4.92 (125)
4.92 (125)
4.92 (125)
4.92 (125)
4.92 (125)
4.92 (125)
5.31 (135)
Straight Plug, Shielded
VG95234 Style M
CA3106E-B-13, -14 or -15 designates a straight,
shielded plug with endbell for shielded braids, and
heat shrinkable boots
CA3106E-B and Modifications, see page A-134
VG95234
Cannon
Part no.
Part no.
VG95234M-10SL-*
CA3106E10SL-**-B-***
–
CA3106E12S-**-B-***
VG95234M-14S-*
CA3106E14S-**-B-***
VG95234M-16S-*
CA3106E16S-**-B-***
VG95234M-16-*
CA3106E16-**-B-***
VG95234M-18-*
CA3106E18-**-B-***
VG95234M-20-*
CA3106E20-**-B-***
VG95234M-22-*
CA3106E22-**-B-***
VG95234M-24-*
CA3106E24-**-B-***
VG95234M-28-*
CA3106E28-**-B-***
VG95234M-32-*
CA3106E32-**-B-***
VG95234M-36-*
CA3106E36-**-B-***
1) Weight without insulator, grommets and contacts.
d1
d22)
max.
min.
0.90 (22,8)
0.30 (7,7)
1.02 (26,0)
0.37 (9,3)
1.15 (29,2) 0.42 (10,6)
1.26 (32,0)
0.53 (13,5)
1.26 (32,0) 0.53 (13,5)
1.44 (36,5) 0.57 (14,6)
1.57 (39,9) 0.73 (18,5)
1.70 (43,1) 0.82 (20,8)
1.88 (46,6) 0.97 (24,6)
2.10 (53,4) 1.06 (27,0)
2.37 (60,1) 1.31 (33,3)
2.61 (66,3) 1.52 (38,5)
2) For max. cable entry.
d3
±0,5
0.73 (18,5)
0.79 (20,0)
0.87 (22,0)
0.98 (25,0)
0.98 (25,0)
1.10 (28,0)
1.26 (32,0)
1.34 (34,0)
1.50 (38,0)
1.61 (41,0)
1.89 (48,0)
2.17 (55,0)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-141
d4
max.
0.64 (16,3)
0.67 (17,0)
0.79(20,0)
0.91(23,0)
0.91(23,0)
0.96 (24,5)
1.12 (28,5)
1.20 (30,5)
1.36 (34,5)
1.48 (37,5)
1.73 (44,0)
2.00 (51,0)
l1
max.
2.17 (55,0)
2.17 (55,0)
2.17 (55,0)
2.36 (60,0)
2.76 (70,0)
2.76 (70,0)
2.76 (70,0)
2.76 (70,0)
2.76 (70,0)
2.76 (70,0)
2.76 (70,0)
3.15 (80,0)
l2
+1
0.67 (17,0)
0.67 (17,0)
0.67 (17,0)
0.71 (18,0)
0.71 (18,0)
0.71 (18,0)
0.71 (18,0)
0.71 (18,0)
0.71 (18,0)
0.71 (18,0)
0.71 (18,0)
0.71 (18,0)
l3
±0,5
0.28 (7,0)
0.28 (7,0)
0.28 (7,0)
0.31 (8,0)
0.31 (8,0)
0.31 (8,0)
0.39 (10,0)
0.39 (10,0)
0.39 (10,0)
0.39 (10,0)
0.39 (10,0)
0.39 (10,0)
Weight1)
g max.
40
42
45
55
65
75
85
100
115
130
170
190
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 142
Cannon VG/CA-Bayonet
Wall Mounting Receptacle
Circular
A
VG95234 Style N1 (with threaded holes in flange)
VG95234 Style N2 (with through holes in flange)
CA3100E-B , -13, -14 or -15, -05-13, -05-14 or -05-15
designates a shielded receptacle with endbell for
shielded braids, and also for heat shrinkable boots
CA3100E-B and Modifications, see page A-134
VG95234
Part no.
Cannon
Part no.
VG95234*XX-10SL-*
CA3100E10SL-**-B-***
VG95234*XX-14S-*
CA3100E14S-**-B-***
VG95234*XX-16S-*
CA3100E16S-**-B-***
VG95234*XX-16-*
CA3100E16-**-B-***
VG95234*XX-18-*
CA3100E18-**-B-***
VG95234*XX-20-*
CA3100E20-**-B-***
VG95234*XX-22-*
CA3100E22-**-B-***
VG95234*XX-24-*
CA3100E24-**-B-***
VG95234*XX-28-*
CA3100E28-**-B-***
VG95234*XX-32-*
CA3100E32-**-B-***
VG95234*XX-36-*
CA3100E36-**-B-***
d1
-0,15
0.72
(18,2)
0.97
(24,6)
1.08
(27,4)
1.08
(27,4)
1.21
(30,8)
1.35
(34,2)
1.47
(37,4)
1.61
(40,9)
1.84
(46,7)
2.10
(53,4)
2.35
(59,6)
1) Weight without insulator, grommets and contacts.
d2
d3
Thread H13
±0,5
N1
N2
0.13
0.73
M4
(3,2)
(18,5)
0.13
0.87
M4
(3,2)
(22,0)
0.13
0.98
M4
(3,2)
(25,0)
0.13
0.98
M4
(3,2)
(25,0)
0.13
1.10
M4
(3,2)
(28,0)
0.13
1.26
M4
(3,2)
(32,0)
0.13
1.34
M4
(3,2)
(34,0)
0.15
1.50
M4
(3,7)
(38,0)
0.15
1.61
M5
(3,7)
(41,0)
0.17
1.89
M5
(4,3)
(48,0)
0.17
2.17
M5
(4,3)
(55,0)
2) For max. cable entry.
d42)
d5
e
l1
l2
l3
l4
min.
0.30
(7,7)
0.42
(10,6)
0.53
(13,5)
0.53
(13,5)
0.57
(14,6)
0.73
(18,5)
0.82
(20,8)
0.97
(24,6)
1.06
(27,0)
1.31
(33,3)
1.52
(38,5)
max.
0.64
(16,3)
0.79
(20,0)
0.91
(23,0)
0.91
(23,0)
0.96
(24,5)
1.12
(28,5)
1.20
(30,5)
1.36
(34,5)
1.48
(37,5)
1.73
(44,0)
2.00
(51,0)
±0,1
0.72
(18,2)
0.91
(23,0)
0.97
(24,6)
0.97
(24,6)
1.06
(27,0)
1.16
(29,4)
1.25
(31,8)
1.37
(34,9)
1.56
(39,7)
1.75
(44,5)
1.94
(49,2)
max.
2.17
(55)
2.28
(58)
2.76
(70)
2.76
(70)
2.76
(70)
2.76
(70)
2.76
(70)
2.76
(70)
2.76
(70)
2.95
(75)
3.35
(85)
+0,4
0.72
(18,2)
0.72
(18,2)
0.72
(18,2)
0.85
(21,5)
0.91
(23,05)
0.91
(23,05)
0.91
(23,05)
0.91
(23,05)
0.95
(24,05)
0.95
(24,05)
0.95
(24,05)
±0,2
0.11
(2,8)
0.13
(3,2)
0.13
(3,2)
0.13
(3,2)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
+0,3
1.00
(25,4)
1.18
(30,0)
1.28
(32,5)
1.28
(32,5)
1.38
(35,0)
1.51
(38,4)
1.61
(41,0)
1.75
(44,5)
2.00
(50,8)
2.24
(57,0)
2.50
(63,5)
Weight1)
g
max.
45
55
65
75
85
95
105
120
150
190
220
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-142
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 143
Cannon VG/CA-Bayonet
Jam Nut Receptacle
CA07A-B designates a rear mounting jam nut receptacle
A
CA07A-B and Modifications, see page A-134
Circular
Cannon Part no.
d1
d2
CA07A10SL-**B-***
1.38
(35,0)
1.63
(41,3)
1.75
(44,4)
1.75
(44,4)
1.90
(48,2)
2.06
(52,4)
2.19
(55,5)
2.32
(59,0)
2.60
(66,0)
2.83
(72,0)
3.15
(80,0)
0.72
(18,2)
0.97
(24,6)
1.08
(27,4)
1.08
(27,4)
1.21
(30,8)
1.35
(34,2)
1.47
(37,4)
1.61
(40,9)
1.84
(46,7)
2.10
(53,4)
2.35
(59,6)
CA07A14S-**B-***
CA07A16S-**B-***
CA07A16-**B-***
CA07A18-**B-***
CA07A20-**B-***
CA07A22-**B-***
CA07A24-**B-***
CA07A28-**B-***
CA07A32-**B-***
CA07A36-**B-***
d3 Thread
7/8-20UNEF-2A
1 1/8-18UNEF-2A
1 1/4-18UNEF-2A
1 1/4-18UNEF-2A
1 3/8-18UNEF-2A
1 1/2-18UNEF-2A
1 5/8-18UNEF-2A
1 3/4-18UNEF-2A
2-18UNEF-2A
2 1/4-16UN-2A
1/2-16UN-2A
(l1)
0.53
(13,5)
0.53
(13,5)
0.53
(13,5)
0.53
(13,5)
0.59
(15,0)
0.59
(15,0)
0.59
(15,0)
0.59
(15,0)
0.59
(15,0)
0.59
(15,0)
0.59
(15,0)
l2
l3
l4
0.49
(12,5)
0.49
(12,5)
0.49
(12,5)
0.83
(21,0)
0.83
(21,0)
0.83
(21,0)
0.83
(21,0)
0.83
(21,0)
0.83
(21,0)
0.83
(21,0)
0.83
(21,0)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.20
(5,0)
0.20
(5,0)
0.20
(5,0)
0.20
(5,0)
0.20
(5,0)
0.20
(5,0)
0.20
(5,0)
1.15
(29,2)
1.15
(29,2)
1.15
(29,2)
1.48
(37,7)
1.57
(40,0)
1.57
(40,0)
1.57
(40,0)
1.57
(40,0)
1.57
(40,0)
1.57
(40,0)
1.57
(40,0)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-143
d4
0.89
(22,7)
1.13
(28,8)
1.26
(32,0)
1.26
(32,0)
1.38
(35,1)
1.50
(38,2)
1.65
(42,0)
1.76
(44,7)
2.01
(51,1)
2.26
(57,4)
2.51
(63,8)
d5
0.82
(20,9)
1.07
(27,2)
1.20
(30,4)
1.20
(30,4)
1.32
(33,6)
1.45
(36,8)
1.57
(39,9)
1.70
(43,1)
1.94
(49,2)
2.19
(55,7)
2.44
(62,0)
d6
0.52
(13,5)
0.70
(17,9)
0.83
(21,1)
0.83
(21,1)
0.95
(24,2)
1.11
(28,2)
1.24
(31,4)
1.36
(34,5)
1.58
(40,1)
1.83
(46,5)
2.02
(51,2)
d7
1.24
(31,5)
1.49
(37,9)
1.61
(41,0)
1.61
(41,0)
1.76
(44,8)
1.93
(49,0)
2.06
(52,2)
2.17
(55,0)
2.44
(62,0)
2.68
(68,0)
2.95
(75,0)
sw
1.25
(31,8)
1.50
(38,1)
1.62
(41,2)
1.62
(41,2)
1.77
(45,0)
1.94
(49,2)
2.06
(52,4)
2.06
(55,2)
2.45
(62,2)
2.69
(68,2)
2.96
(75,2)
d8
0.81
(20,6)
1.06
(26,9)
1.19
(30,1)
1.19
(30,1)
1.31
(33,3)
1.44
(36,5)
1.56
(39,6)
1.62
(41,2)
1.87
(47,5)
2.13
(54,1)
2.38
(60,5)
l5
l6
l7
0.13
(3,2)
0.13
(3,2)
0.13
(3,2)
0.13
(3,2)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.16
(4,0)
0.20
(5,0)
0.24
(6,0)
0.24
(6,0)
0.24
(6,0)
0.28
(7,0)
0.28
(7,0)
0.28
(7,0)
0.28
(7,0)
0.28
(7,0)
0.28
(7,0)
0.31
(8,0)
0.10
(2,5)
0.10
(2,5)
0.10
(2,5)
0.10
(2,5)
0.12
(3,0)
0.12
(3,0)
0.12
(3,0)
0.12
(3,0)
0.12
(3,0)
0.12
(3,0)
0.12
(3,0)
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 144
Cannon VG/CA-Bayonet
Straight Plug with PG Adapter
A
CA06PG-B designates a straight plug featured by an
adaptor for PG glands.
Circular
Enlarged PG glands upon request.
CA06ME-B1 designates a straight plug featured by an
adaptor for metric glands.
CA06PG-B; CA06ME-B and Modifications see page A-134.
1Alternative
enlarged PG glands upon request
Cannon
Part no.
d1
d3
CA06PG10SL-**-B-***
0.90 (22,8)
0.71 (18,0)
0.38 (9,7)
2.05 (52)
0.37 (9,5)
0.28 (7,0)
PG 9
CA06PG12S-**-B-***
1.02 (26,0)
0.74 (18,8)
0.41 (10,4)
2.05 (52)
0.37 (9,5)
0.28 (7,0)
PG 9
CA06PG14S-**-B-***
1.15 (29,2)
0.87 (22,0)
0.49 (12,5)
2.05 (52)
0.39 (10,0)
0.28 (7,0)
PG11
CA06PG16S-**-B-***
1.26 (32,0)
0.93 (23,6)
0.59 (15,0)
2.13 (54)
0.39 (10,0)
0.28 (7,0)
PG13,5
CA06PG16-**-B-***
1.26 (32,0)
0.94 (24,0)
0.59 (15,0)
2.52 (64)
0.39 (10,0)
0.28 (7,0)
PG13,5
CA06PG18-**-B-***
1.44 (36,5)
0.96 (24,4)
0.67 (17,0)
2.72 (69)
0.45 (11,5)
0.30 (7,5)
PG13,5
CA06PG20-**-B-***
1.57 (39,9)
1.06 (26,8)
0.67 (17,0)
2.76 (70)
0.45 (11,5)
0.30 (7,5)
PG16
CA06PG22-**-B-***
1.66 (42,1)
1.04 (26,4)
0.67 (17,0)
2.87 (73)
0.45 (11,5)
0.30 (7,5)
PG16
CA06PG24-**-B-***
1.83 (46,6)
1.06 (26,8)
0.73 (18,5)
2.91 (74)
0.49 (12,5)
0.30 (7,5)
PG16
CA06PG28-**-B-***
2.10 (53,4)
1.26 (32,0)
0.73 (18,5)
2.91 (74)
0.49 (12,5)
0.30 (7,5)
PG21
CA06PG32-**-B-***
2.37 (60,1)
1.61 (40,8)
0.94 (24,0)
2.99 (76)
0.53 (13,5)
0.33 (8,5)
PG29
CA06PG36-**-B-***
2.61 (66,3)
1.61 (40,8)
1.26 (32,0)
3.43 (87)
0.59 (15,0)
0.35 (9,0)
PG29
l1
l2
l3
d2
Metric
M16 X 1,5
Cannon
Part no.
d1
d3
max
d4
l1
d4
l2
l3
d2
PG-Thread
CA06ME10SL-**-B-***
0.90 (22,8)
0.85 (21,5)
0.38 (9,7)
2.05 (52)
0.37 (9,5)
0.28 (7,0)
CA06ME12S-**-B-***
1.02 (26,0)
0.89 (22,5)
0.41 (10,4)
2.05 (52)
0.37 ((9,5)
0.28 (7,0)
M16 X 1,5
CA06ME14S-**-B-***
1.15 (29,2)
0.98 (25,0)
0.49 (12,5)
2.05 (52)
0.28 (7,0)
M20 X 1,5
0.39 (10,0)
CA06ME16S-**-B-***
1.26 (32,0)
1.04 (26,5)
0.59 (15,0)
2.13 (54)
0.39 (10,0)
0.28 (7,0)
M20 X 1,5
CA06ME16-**-B-***
1.26 (32,0)
1.04 (26,5)
0.59 (15,0)
2.52 (64)
0.39 (10,0)
0.28 (7,0)
M20 X 1,5
CA06ME18-**-B-***
1.44 (36,5)
1.22 (31,0)
0.67 (17,0)
2.72 (69)
0.45 (11,5)
0.30 (7,5)
M25 X 1,5
CA06ME20-**-B-***
1.57 (39,9)
1.34 (34,0)
0.67 (17,0)
2.76 (70)
0.45 (11,5)
0.30 (7,5)
M25 X 1,5
CA06ME22-**-B-***
1.66 (42,1)
1.59 (40,5)
0.67 (17,0)
2.87 (73)
0.45 (11,5)
0.30 (7,5)
M32 X 1,5
CA06ME24-**-B-***
1.83 (46,6)
1.59 (40,5)
0.73 (18,5)
2.91 (74)
0.49 (12,5)
0.30 (7,5)
M32 X 1,5
CA06ME28-**-B-***
2.10 (53,4)
1.61 (41,0)
0.73 (18,5)
2.91 (74)
0.49 (12,5)
0.30 (7,5)
upon request
CA06ME32-**-B-***
2.37 (60,1)
1.91 (48,5)
0.94 (24,0)
2.99 (76)
0.53 (13,5)
0.33 (8,5)
upon request
CA06ME36-**-B-***
2.61 (66,3)
1.91 (48,5)
1.26 (32,0)
3.43 (87)
0.59 (15,0)
0.35 (9,0)
upon request
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-144
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 145
Cannon VG/CA-Bayonet
Metal Protecting Caps
For receptacles, shell style
3100, 3101 und 3102
Material: Aluminum alloy
A
Circular
Shell
size
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
VG95234
Part no.
with chain
VG95234KR10SL
–
VG95234KR14S
VG95234KR16S
VG95234KR16
VG95234KR18
VG95234KR20
VG95234KR22
VG95234KR24
VG95234KR28
VG95234KR32
VG95234KR36
VG95234
Part no.
with cord
VG95234KA10SL
–
VG95234KA14S
VG95234KA16S
VG95234KA16
VG95234KA18
VG95234KA20
VG95234KA22
VG95234KA24
VG95234KA28
VG95234KA32
VG95234KA36
Cannon
Part no.
with chain
CA121003-1
CA121003-2
CA121003-3
CA121003-4
CA121003-5
CA121003-6
CA121003-7
CA121003-8
CA121003-9
CA121003-10
CA121003-11
CA121003-12
Cannon
Part no.
with cord
CAB81-10SL-D
CAB81-12S-D
CAB81-14S-D
CAB81-16S-D
CAB81-16-D
CAB81-18-D
CAB81-20-D
CAB81-22-D
CAB81-24-D
CAB81-28-D
CAB81-32-D
CAB81-36-D
d1
max.
d2
+0,6
0.93 (23,5)
1.06 (27,0)
1.20 (30,5)
1.30 (33,0)
1.30 (33,0)
1.48 (37,5)
1.61 (41,0)
1.73 (44,0)
1.87 (47,5)
2.15 (54,5)
2.40 (61,0)
2.66 (67,5)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.22 (5,5)
0.22 (5,5)
0.22 (5,5)
l1
min.
f. chain
3.54 (90)
3.54 (90)
3.54 (90)
3.54 (90)
3.94 (100)
3.94 (100)
4.53 (115)
4.53 (115)
4.53 (115)
6.30 (160)
6.30 (160)
6.30 (160)
l2
max.
Weight
g max.
0.79 (20)
0.79 (20)
0.79 (20)
0.79 (20)
0.98 (25)
0.98 (25)
0.98 (25)
0.98 (25)
0.98 (25)
0.98 (25)
0.98 (25)
0.98 (25)
16
17
18
19
23
27
30
33
37
42
48
55
d1
max.
d2
l1
l2
max.
Weight
g max.
0.83 (21,0)
0.94 (24,0)
1.08 (27,5)
1.18 (30,0)
1.18 (30,0)
1.32 (33,5)
1.46 (37,0)
1.57 (40,0)
1.71 (43,5)
1.95 (49,5)
2.20 (56,0)
2.46 (62,5)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.17 (4,3)
0.19 (4,7)
0.19 (4,7)
0.19 (4,7)
0.19 (4,7)
0.22 (5,5)
0.22 (5,5)
3.54 (90)
3.94 (100)
3.94 (100)
3.94 (100)
4.53 (115)
4.53 (115)
5.12 (130)
5.12 (130)
5.12 (130)
7.48 (190)
7.48 (190)
7.48 (190)
1.14 (29)
1.14 (29)
1.14 (29)
1.14 (29)
1.46 (37)
1.46 (37)
1.46 (37)
1.46 (37)
1.46 (37)
1.46 (37)
1.46 (37)
1.46 (37)
19
23
26
28
33
36
43
47
53
63
75
88
Metal Protecting Caps
For plugs, shell style
3106 and 3108
Material: Aluminum alloy
Shell
size
10SL
12S
14S
16S
16
18
20
22
24
28
32
36
VG95234
Part no.
with chain
VG95234KB10SL
–
VG95234KB14S
VG95234KB16S
VG95234KB16
VG95234KB18
VG95234KB20
VG95234KB22
VG95234KB24
VG95234KB28
VG95234KB32
VG95234KB36
VG95234
Part no.
with cord
VG95234KC10SL
–
VG95234KC14S
VG95234KC16S
VG95234KC16
VG95234KC18
VG95234KC20
VG95234KC22
VG95234KC24
VG95234KC28
VG95234KC32
VG95234KC36
Cannon
Part no.
with chain
CA121004-1
CA121004-2
CA121004-3
CA121004-4
CA121004-5
CA121004-6
CA121004-7
CA121004-8
CA121004-9
CA121004-10
CA121004-11
CA121004-12
Cannon
Part no.
with cord
CAB80-10SL-D
CAB80-12S-D
CAB80-14S-D
CAB80-16S-D
CAB80-16-D
CAB80-18-D
CAB80-20-D
CAB80-22-D
CAB80-24-D
CAB80-28-D
CAB80-32-D
CAB80-36-D
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-145
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 146
Cannon VG/CA-Bayonet
Contacts
A
Standard contacts and
contacts with reduced
termination diameter
Size 15S/16S, 15/16, 25/12, 60/100/8, 160/4, 500/0
Size 10/20
Pin contacts
d1 d2
Circular
d1 d2
Finish
A36 –
A176 –
Contact
size
10/20
15S/16S
15/16
25/12
60/100/8
160/4
500/0
5
2
m silver plated and passivated
m nickel plated, min. 0,5 m gold
VG95234
Part no.
VG95234P10-002
VG95234P10-001
VG95234P15S-003
VG95234P15S-002
VG95234P15S-001
VG95234P15-003
VG95234P15-002
VG95234P15-001
VG95234P25-002
VG95234P25-001
VG95234P8-001
VG95234P60-002
VG95234P100-001
VG95234P60-001
VG95234P4-001
VG95234P160-002
VG95234P160-001
VG95234P0-001
VG95234P500-003
VG95234P500-001
VG95234P500-002
Wire
size
mm2
AWG
0,5-1,0
0,2-0,4
0,75-1,5
0,3-0,6
0,14-0,38
0,75-1,5
0,3-0,6
0,14-0,38
2,0-3,0
0,75-1,5
4,0
–
6,0
10,0
2,0-3,0
–
16,0
10,0
–
–
50,0
25,0
35,0
16,0
20/18
26/22
18/16
22/20
22/26
18/16
22/20
22/26
14/12
18/16
–
8
10
–
14/12
4
–
–
6
0
–
4
2
–
Part no. with
finish
Standard: A36
silver plated
030-8585-000
030-8585-010
030-8586-000
330-8744-000
030-8586-010
030-8587-000
330-8659-000
030-8587-030
030-8588-000
030-8588-010
030-8588-054
030-8612-000
030-8589-000
030-8590-000
030-8612-010
030-8613-000
030-8591-000
030-8591-020
030-8613-010
030-8614-000
030-8592-000
030-8614-010
030-8614-020
030-8614-030
Part no. with
finish
Mod.Code: A176
gold plated
030-8585-006
–
030-8586-006
330-8744-006
–
030-8587-006
330-8659-006
030-8587-036
030-8588-006
030-8588-016
–
030-8612-006
–
–
–
–
–
–
–
–
–
–
–
–
d1
1,5
0,9
1,75
1,2
0,9
1,75
1,2
0,9
2,5
1,75
2,8
4,55
3,5
4,8
2,5
7,1
6,2
4,8
5,7
11,5
10,7
7,6
9,1
6,2
d2
+0,05
+0,05
+0,08
+0,1
+0,05
+0,08
+0,1
+0,05
+0,1
+0,08
+0,1
+0,1
+0,1
+0,1
+0,05
+0,15
+0,15
+0,1
+0,1
+0,15
+0,15
+0,15
+0,15
+0,15
2,4
2,4
2,75
2,75
2,75
2,75
2,75
2,75
3,8
3,4
3,8
6,8
6,8
6,8
6,8
9,55
9,55
9,55
9,55
14,35
14,35
14,35
14,35
14,35
l1
±0,15
-0,05
-0,05
-0,05
-0,05
-0,05
-0,05
-0,05
-0,05
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
-0,1
28,4
28,4
27,4
27,4
27,4
31,4
31,4
31,4
37,0
37,0
37,0
39,6
39,6
39,6
39,6
39,6
39,6
39,6
39,6
41,0
41,0
41,0
41,0
41,0
Color
Code
–
blue
–
red
blue
–
red
blue
–
black
–
yellow
–
green
–
–
–
brown
–
–
white
grey
–
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-146
www.ittcannon.com
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 147
Cannon VG/CA-Bayonet
Contacts
Standard contacts and
contacts with reduced
termination diameter
Size 10/20
Size 25/12
Size 15S/16S, 15/16
Size 60/100/8, 160/4, 500/0
A
Socket contacts
Circular
Finish
A36
–
A176 –
5 m silver plated
and passivated
2 m nickel plated,
min. 0,5 m gold plated
Contact VG95234
size
Part no.
Wire
size
mm2
10/20
VG95234S10-002
VG95234S10-001
15S/16S VG95234S15S-003
VG95234S15S-002
VG95234S15S-001
15/16
VG95234S15-003
VG95234S15-002
VG95234S15-001
25/12
VG95234S25-002
VG95234S25-001
60/100/8 VG95234S8-001
VG95234S60-002
VG95234S100-001
VG95234S60-001
160/4
VG95234S4-001
VG95234S160-002
500/0
VG95234S160-001
VG95234S0-001
VG95234S500-003
VG95234S500-001
VG95234S500-002
0,5-1,0
0,2-0,4
0,75-1,5
0,3-0,6
0,14-0,38
0,75-1,5
0,3-0,6
0,14-0,38
2,0-3,0
0,75-1,5
4,0
0,3–0,6
–
6,0
10,0
2,0-3,0
–
16,0
10,0
–
–
50,0
25,0
35,0
16,0
AWG
20/18
26/22
18/16
22/20
22/26
18/16
22/20
22/26
14/12
18/16
–
22/20
8
10
–
14/12
4
–
–
6
0
–
4
2
–
Part no. with
finish
Standard: A36
silver plated
031-8554-000
031-8554-010
031-8555-110
031-8688-110
031-8555-130
031-8556-110
031-8639-120
031-8556-130
031-8557-000
031-8557-020
031-8557-010
031-8557-040
031-8519-000
031-8558-000
031-8559-000
031-8519-010
031-8520-000
031-8560-000
031-8560-020
031-8520-010
031-8521-000
031-8561-000
031-8521-010
031-8521-020
031-8521-030
Part no. with
finish
Mod.Code A176
gold plated
031-8554-006
–
031-8555-115
031-8688-115
–
031-8556-115
031-8639-115
–
031-8557-006
031-8557-026
–
–
031-8519-006
–
–
–
–
–
–
–
–
–
–
–
–
d1
1,5
0,9
1,75
1,20
0,90
1,75
1,2
0,9
2,5
1,75
2,8
1,2
4,55
3,5
4,8
2,5
7,1
6,2
4,8
5,7
11,5
10,7
7,6
9,1
6,2
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A-147
d2
+0,05
+0,05
+0,08
+0,1
+0,05
+0,08
+0,1
+0,05
+0,1
+0,08
+0,1
+0,1
+0,1
+0,1
+0,1
+0,05
+0,15
+0,15
+0,1
+0,15
+0,15
+0,15
+0,15
+0,15
+0,15
2,4 -0,05
2,4 -0,05
2,75 -0,05
2,75 -0,05
2,75 -0,05
2,75 -0,05
2,75 -0,05
2,75 -0,05
3,8 -0,1
3,4 -0,1
3,8 -0,1
2,75 -0,1
6,8 -0,1
6,8 -0,1
6,8 -0,1
6,8 -0,1
9,55 -0,1
9,55 -0,1
9,55 -0,1
9,55 -0,1
14,35 -0,1
14,35 -0,1
14,35 -0,1
14,35 -0,1
14,35 -0,1
l1
±0,2
36,8±0,3
36,8±0,3
29,1
29,1
29,1
37,8
37,8
37,8
37,0
37,0
37,0
37,0
40,1
40,1
40,1
40,1
40,1
40,1
40,1
40,1
41,6
41,6
41,6
41,6
41,6
Color
Code
–
blue
–
red
blue
–
red
blue
–
black
–
–
–
yellow
–
green
–
–
–
brown
–
–
white
grey
–
ca_A1-A163.qxd:Layout 1
2/9/11
7:51 PM
Page 148
Cannon VG/CA-Bayonet
Contacts
Termination Tools
for pin and socket contacts according VG95234 and for
Cannon contacts with reduced termination size.
Circular
A
Contact
size
Wire size
mm2
AWG
10/20
0,2 – 1,0
20 – 24
15S/16S
0,14 – 1,5
16 – 26
15/16
0,14 – 1,5
16 – 26
25/12
Contact
size
60/8
100/
160/4
500/0
0,75 – 4,0
Wire size
mm2
10,0 – 2,0
16,0 – 10,0
50,0 – 16,0
12 – 18
AWG
8 – 14
4–6
Pneumatic crimp tool1)
Standard
Order
type*
Number
Hand crimp tool
Type
Crimp die for
M22520-1-01
M22520-1-01
Hand crimp
tool
(eight indent
crimp)
Order Number
995-0001-585
600 325
600 325
TH 452
TH 452
TH 452
TH 452
TH 452
TH 452
TH 452
Hydraulic basic
equipment
Electro-hydraulic tool *
HK12EL (order number: 121586-5075)
Alternative
WA27F-CE
121586-5067
WA22-CE
121586-5070
BM-2
121586-5068
pneumatic crimp
tool (AWG12-20)
pneumatic crimp
tool (AWG20-32)
Bench mount
WA10
121586-5069
Foot pedal
M22520-3-1
995-0001-684
Gauge
Crimp tool (2 of each required)
hex Crimp die
CT 121586-5231
Label: 01
Hand operated hydraulic tool
HK120 (order number: 121586-5077) CT 121586-5230
Label: 02
0–4
Description
CT 121586-5229
Label: 03
Turret for
pneumatic
crimp tool
608 325
608 325
TH 452
TH 452
TH 452
TH 452
TH 452
TH 452
TH 452
Wrench #
Crimp Locator
5,2 mm
Optional device to be
mounted on left hand
crimp tools
CT121586-5232
7,25 mm
11,40 mm
To insert the socket contact of size 15S/16S, 15/16/25 and 12, the following
guiding pins are essential:
Part Nr.
226-1017-000
226-1018-000
Contact size
AWG
16S/16
12
Order #s for Insertion Tools:
for contact size
Insertion tool
10
CIT-20*
15S/16S/15/16
CIT-16*
25/12
CIT-12*
60/100/8
CIT-8*
160/4
CIT-4*
500/0
CIT-0*
Insertion Tool Kit
metric
15S/15
25
Insertion pliers
CIT-F80-20
CIT-F80-16
CIT-F80-12
CIT-F80-Kit (Contains full set of all #, plus handle)
Order #s for Extraction Tools:
for contact size
Extraction tool
10
CET-F80-20*
15S/16S/15/16
CET-F80-16*
25/12
CET-F80-12*
60/100/8
CET-8*
160/4
CET-4*
500/0
CET-0*
Extraction Tool Kit
CET-F80-Kit (Contains full set of all #, plus handle)
Notes
1. For large series production, semi-automatic crimp machine Type
HACS-IV-MSXX upon request
2. For insertion and extraction of the contacts and for connector assembly, see Assembly Instructions MIL-C-5015/VG95234
3. Standard contacts acc. to MIL-C-5015/VG95234
* Datasheet available upon request
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
A-148
www.ittcannon.com