ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 1 ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 5 Cannon Quadrax KJAQ0 Wall Mounting Receptacle Table of Contents G Quadrax Size MS B Shell Size Class -2A M R1 +.000 (+.000) Code Blunt Start (Plated) -.005 (-.130) 9 A .6250-0.1P-0. 3L-TS 17 E 1.1875-0. 1P-0. 3L-TS 21 G 1.3750-0. 1P-0. 3L-TS 23 H 1.5000-0. 1P-0. 3L-TS 25 J 1.6250-0.1P-0. 3L-TS .820 (20.83) .820 (20.83) .790 (20.07) .790 (20.07) .790 (20.07) R2 S ±.012 T TT +.004 (.100) +.004 (.100) V Thread Metric Thread ±(.300) -.002 (.050) -.002 (.050) (Plated) .938 (23.83) 1.312 (33.32) 1.562 (39.67) 1.688 (42.88) 1.812 (46.02) .128 (3.25) .128 (3.25) .128 (3.25) .154 (3.91) .154 (3.91) .216 (5.49) .194 (4.93) .194 (4.93) .242 (6.15) .242 (6.15) M12X1-6g 0.100 R W Max Z +.005 (.130) .719 (18.26) 1.062 (26.97) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) .594 (15.09) .969 (24.61) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) M25X1-6g 0.100R M31X1-6g 0.100R M34X1-6g 0.100R M37X1-6g 0.100R -.010 (.250) .098 (2.50) .098 (2.50) .126 (3.20) .126 (3.20) .126 (3.20) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) KJAQ2 Box Mounting Receptacle (No Rear Threads) Size MS B Shell Size Class -2A Code +.005 (.130) Blunt Start (Plated) M R1 +.000 (+.000) -.005 (-.130) R2 9 A .6250-0.1P-0. 3L-TS 17 E 1.1875-0. 1P-0. 3L-TS 21 G 1.3750-0. 1P-0. 3L-TS 23 H 1.5000-0. 1P-0. 3L-TS 25 J 1.6250-0.1P-0. 3L-TS .820 (20.83) .820 (20.83) .790 (20.07) .790 (20.07) .790 (20.07) .594 (15.09) .969 (24.61) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) .719 (18.26) 1.062 (26.97) 1.250 (31.75) 1.375 (34.92) 1.500 (38.10) S T TT ±.012 ±(.300) +.004 (.100) -.002 (.050) +.004 (.100) -.002 (.050) .938 (28.83) 1.312 (33.32) 1.562 (39.67) 1.688 (42.88) 1.812 (46.02) .128 (3.25) .128 (3.25) .128 (3.25) .154 (3.91) .154 (3.91) .216 (5.49) .194 (4.93) .194 (4.93) .242 (6.15) .242 (6.15) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com G-5 W Max .098 (2.50) .098 (2.50) .126 (3.20) .126 (3.20) .126 (3.20) Z -.005 (-.130) -.010 (.250) 1.170 (29.72) 1.170 (29.72) 1.170 (29.72) 1.170 (29.72) 1.170 (29.72) P.C. EXT Contact Part Number 224-0007-000 P.C. EXT Contact Part Number 224-0007-012 .300 (7.62) .250 (6.35) .200 (5.08) 150 (3.81) ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 6 Cannon Quadrax KJAQ6 Plug Table Straight of Contents Quadrax G Size MS Shell Size Code B +.008 (.200) -.000 (.000) C Places D Class -2B Blunt Start (Plated) K Max L Max Q Max V Thread Metric Thread (Plated) 9 A 4 .6250-0. 1P-0. 3L-TS E 4 1.1875-0. 1P-0. 3L-TS 21 G 8 1.3750-0. 1P-0. 3L-TS 23 H 8 1.5000-0. 1P-0. 3L-TS 25 J 8 1.6250-0. 1P-0. 3L-TS .748 (19.00) 1.291 (32.80) 1.524 (38.70) 1.642 (41.70) 1.768 (44.90) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) .859 (21.82) 1.391 (35.53) 1.625 (41.28) 1.750 (44.45) 1.875 (47.62) M12X1-6g 0.100R 17 .724 (18.40) 1.268 (32.20) 1.500 (38.10) 1.618 (41.40) 1.744 (44.30) W +.008 (.200) -.004 (.100) .760 (19.30) .760 (19.30) .760 (19.30) .760 (19.30) .760 (19.30) M25X1-6g 0.100R M31X1-6g 0.100R M34X1-6g 0.100R M37X1-6g 0.100R KJAQ7 Jam Nut Receptacle Size MS Shell Size A +.010 (.250) B Class -2A Code -.005 (.130) Blunt Start 9 A .6250-0. 1P-0. 3L-TS 17 E 21 G 23 H 25 J .104 (2.64) 104 (2.64) .135 (3.43) .135 (3.43) .135 (3.43) C M P S R Thread +.004 (.100) +.005 (.130) +.016 (.410) Metric Thread V Thread Metric Thread Z +.005 -010 (.250) (Plated) -.004 (.100) -.004 (.100) (Plated) (Plated) -.004 (.100) .871 (22.12) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .555 (14.10) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) 1.062 (26.97) 1.625 (31.75) 1,938 (49.23) 2.062 (52.37) 2.188 (55.38) M17X1-6g 0. 100R M12X1-6g 0. 100R M32X1-6g 0. 100R M25X1-6g 0. 100R M38X1-6g 0. 100R M31X1-6g 0. 100R M41X1-6g 0. 100R M34X1-6g 0. 100R M44X1-6g 0. 100R M37X1-6g 0. 100R 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) (.130) 1.1875-0. 1P-0. 3L-TS 1.3750-0. 1P-0. 3L-TS 1.5000-0. 1P-0. 3L-TS (20.07) 1.6250-0. 1P-0. 3L-TS .651 (16.53) 1.187 (30.15) 1.312 (33.32) 1.562 (39.67) 1.687 (42.85) Dimensions shown in inches (mm) Specifications and dimensions subject to change G-6 www.ittcannon.com ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 7 Cannon Quadrax Insert Arrangements KJAQ Series Table of Contents Insert Arrangements (Front View Pin Connector) Size 17 2C 2-Quadrax Contacts Size 21 4C 4-Quadrax Contacts Size 25 8C 8-Quadrax Contacts Size 23 6C 6-Quadrax Contacts 2 A A A D 8 3 E B B 1 F B 4 7 C C D 6 5 Notes: 1. All MIL-DTL-38999 inserts, in both the plug and the receptacle connectors, provide electrical bonding of the cable shield to the housing. 2. MIL-DTL-38999 inserts are integral part of the shell. Arrangements, other than those shown, are available upon request. 3. All insert arrangements are shown as viewed from the front view pin connector. 4. To minimize contact splay and to assure proper mating, each rear release “Quadrax” pin contact is supplied with a plastic “stabilizer.” Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com G-7 Quadrax Size 9 1C 1-Quadrax G ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 8 Cannon Quadrax Table ofand Contents How to Order Rack Panel Connectors BKA Quadrax G R D Q209 3 3 00 01 F0 CONNECTOR SERIES RoHS CLASS SHELL SIZE INSERT ARRANGEMENT CODE SHELL STYLE CONNECTOR MOUNTING MODIFIER POLARIZING POSITION SPECIAL MODIFIER CONNECTOR SERIES BKA - Rack and Panel Connector per ARINC 600 Requirements (Standard Shell finish: Light Yellow Chromate Conversion) Class C Semi-Environmental Connector contains removable inserts with sealing grommets. Inserts accommodate rear-release, rear-removable crimp contacts. Plug connector shells are supplied without peripheral o-ring seals. D Non-Environmental Connector contains removable inserts without sealing grommets. Inserts accommodate rear-release, rear-removable crimp contacts. E Environmental Connector contains non-removable inserts with sealing grommets, bonded in the shell. Inserts accommodate rear-release, rear-removable crimp contacts. Plug connector shells are supplied with peripheral o-ring seals. F Front Release; Non-Environmental (Receptacle Connectors Only) Connector contains removable inserts without sealing grommets. Insert arrangements accommodate front release, front removable solder post contacts and rear releaseremovable crimp contacts. rear X Front Release; Non-Environmental (Receptacle Connectors Only) Connector contains removable inserts without sealing grommets. All inserts in the connector accommodate front release, front removable solder post contacts. NOTE: An “R” after the connector series would mean supplied with RoHS compliant finish. Shell Size Size 2 Accommodates Maximum 28 size 8 Quadrax contacts Size 3 Accommodates Maximum 56 Size 8 Quadrax contacts Dimensions shown in inches (mm) Specifications and dimensions subject to change G-8 www.ittcannon.com ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 9 Cannon Quadrax BKA Connector Layouts Size 2 and 3 Table of Contents A B C Q035 Q074 Q075 Q086 Q089 Q096 Q69 Q81 Q107 Q135 Q144 Q154 Q174 Q198 Q209 Q225 Q246 Q253 Q253 Q261 Q264 Q274 Q307 Q313 Q324 Q324 Q435 Q487 Q619 Q626 11Q11 4W4 11Q11 11Q11 4W4 BLANK 11Q11 11Q11 11Q11 11Q11 120T2 120T2 150 11Q11 11Q11 11Q11 150 120T2 150 4W4 120T2 4W4 110 150 150 11Q11 11Q11 11Q11 150 150 11Q11 11Q11 BLANK 11Q11 BLANK 11Q11 24 11Q11 11Q11 24 11Q11 11Q11 11Q11 11Q11 11Q11 150 11Q11 120T2 121 120T2 120T2 120T2 11Q11 150 150 METAL BLK 11Q11 150 150 150 13Q2 59 64Q2 64Q2 85 85 34 59 85 100 13W2 13W2 13W2 13Q2 BLANK 64Q2 85 13WQ2 13W2 BLANK 24Q4 13Q2 6Q6 13WQ2 24Q4 BLANK 13Q2 13Q2 13Q2 13Q2 QA096 QA324 11Q11 11Q11 BLANK METAL BLK 85 BLANK ADDITIONAL DESIGNS AVAILABLE UPON REQUEST Dimensions shown in inches (mm) Specifications and dimensions subject to change G-9 D E F 11Q11 11Q11 11Q11 150 13Q2 13Q2 11Q11 4W4 24 120T2 34 13Q2 4W4 24 120T2 150 13Q2 6Q6 150 150 150 150 150 150 150 150 150 150 13Q2 100 13Q2 6T6 13Q2 150 150 13W2 Quadrax Layout www.ittcannon.com G Shell Cavity Identification Connector ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 10 Cannon Quadrax Insert Arrangement Code Table of Contents Quadrax G See ITT Cannon website www.ittcannon.com when new Insert Arrangement code is required. For rack and panel on-line catalog go to literature/literature by product/rack and panel/view PDF. Q prefix denotes Quadrax contacts and inserts arrangements are used in this connector arrangement. Quadrax contact cavities will accommodate size 8 twinax and coax contacts of a similar type (i.e. front release, front removal or rear release, rear removal types. For Quadrax contact and cable recommendations see ARINC 600 Specification. Shell Style 3 4 Plug (Mounts on the Rack) Receptacle (Mounts on the LRU) Connector Mounting Modifier 00 Plug and Receptacle Connectors .148 dia. connector mounting holds (This is a standard configuration) 01 Plug and Receptacle Connectors With #6 (.138)- 32 ESNA clinch nuts (See table for quantities) 03 Plug and Receptacle Connectors With #4 (.112)- 32 ESNA clinch nuts (See table for quantities) 08 Size 2 and 3 Plug and Receptacle Connectors Only With #4 (.112)- 32 ESNA clinch nuts in all connector mounting holes (See table for quantities) 09 Size 2 and 3 Plug and Receptacle Connectors Only With #6 (.138)- 32 ESNA clinch nuts in all connector mounting holes (See table for quantities) 10 Size 2 Plug and Receptacle Connectors Only With #4 (.112)- 340 ESNA clinch nuts installed in two mounting holes located between shell cavities “B” and “C” 11 Receptacle Connectors Only With #6 (.138)- 32 ESNA clinch nuts installed in two mounting holes located between shell cavities “B” and “C” 12 Size 2 Plug and Receptacle Connectors Only With six #4 (.112) clinch nuts (PEM #KFS2-440) 15 Plug and Receptacle Only With four #6 (.138)- 32 clinch nuts per MIL-N-45938/7 and clear cadmium shell finish 17 Receptacle Connectors Only Standard configuration with .0008-.0012 thick nickel plated shell 21 Plug and Receptacle Connectors Standard Configuration with clear cadmium over nickel plated shells 22 Plug Connectors Only Standard Configuration with .0008-.0012 thick nickel plated shell The shell is provided with with an EMI/Grounding spring. Metallic inserts, if supplied, are selectively plated- I.D. Silver; O.D Nickel over Silver. The contact retaining/grounding clips are gold plated. Dimensions shown in inches (mm) Specifications and dimensions subject to change G-10 www.ittcannon.com ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 11 Cannon Quadrax Insert Arrangement Code Table of Contents Mounting Modifier 01, 03, 24, 37, 38 08, 09 Shell Size 2 3 2 3 Quantity of Clinch Nuts Plug Connector Receptacle Connector 4 6 8 10 8 10 12 14 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com G-11 G Quadrax Connector Mounting Modifier (continued) 23 Plug and Receptacle Connectors With floating eyelets (.048 min. radial float) in four corner connector mounting holes 24 Plug Connectors Only With #4 (.112)- 32 ESNA clinch nuts (See table for quantities) 26 Receptacle Connectors Only Standard Configuration with .0008-.0012 thick nickel plated shell. Non-environmental inserts- BKAD 29 Applies to both Plug and Receptacle meeting the definitions of the 22 and 17 mode codes. All mounting holes shall have #6-32 clinch nuts installed. 33 Plug Connectors Only Standard Configuration with .0008-.0012 thick nickel plated shells, but without EMI/Grounding springs 34 Plug Connectors Only Standard Configuration with .0008-.0012 thick nickel plated shells, but without EMI/Grounding springs and #6-32 clinch nuts installed as in mod code -01. 37 Plug Connectors Only With metric clinch nuts M3.5X6 (See table quantities) 38 Plug Connectors Only With metric clinch nuts M3.5X6 (See table quantities) and with .0008- .0012 thick nickel plated shell. The shell is provided with an EMI/Grounding spring. Metallic inserts, if supplied, are selectively plated- I.D. Silver; O.D. Nickel over Solver. The contact retaining/grounding clips are gold plated. 41 Plug Connectors Only is the -22 mod code (nickel plated with EMI springs) and #6-32 clinch nuts ESNA type same as standard mod code -01. 43 Plug Connectors Only is the -22 mod code (nickel plated with EMI springs) and #4-40 clinch nuts ESNA type same as standard mod code -03. ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 12 Cannon Quadrax Insert Arrangement Code Table of Contents Quadrax G Polarizing Positions Blank Polarizing hardware is supplied with the connector, but is not installed. 00 Polarizing hardware is not supplied with the connector. 01-216 Polarizing hardware is installed in positions per ARINC 600. Special Modifier Blank Connector is suppled with full complement of power and signal crimp contacts. Quadrax, triax, twinax, and coax contacts are purchased separately. F0 Connector is suppled without contacts (F0 is not marked on the connector) F00 Connector is suppled without contacts and without waveguide (F00 is not marked on the connector) Solder Post Dia. 0.025 0.025 0.025 0.025 SA SB SC SD W* WA WB WC Solder Post Extension .150 .250 .375 .500 Size 22 Contact Part Number Receptacle Connector Plug Connector 031-1352-000 030-3288-000 031-1352-001 030-3288-003 031-1352-002 030-3288-004 031-1352-003 030-3288-005 Connector is suppled with full complement of signal (size 22) and power contacts per ARINC 600. Signal contacts are front release, front removable with wrap post termination installed in the connector. Power contacts are rear release, rear removable with crimp termination supplied uninstalled. Wrap Post Square 0.025 0.025 0.025 Wrap Post Extension .250 .375 .500 Size 22 Contact Part Number Receptacle Connector Plug Connector 031-1351-000 030-3310-000 031-1351-001 030-3310-001 031-1351-002 030-3310-002 Note: For ARINC 404 connectors due to the lack of industry standards governing the use of Quadrax contacts, unique part numbers will be assigned for each customer application until such time that a mutually accepted standard is adopted. Dimensions shown in inches (mm) Specifications and dimensions subject to change G-12 www.ittcannon.com ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 13 Cannon Quadrax Insert TableArrangements of Contents Insert Arrangements – the following inserts are currently available G 11Q11 Metallic 11 Quadrax Contacts 6Q6 Metallic 6 Quadrax Contacts 24T4 4 Quadrax Contacts 20 #20 Contacts 13Q2 2 Quadrax Contacts 4 #20HD Contacts 3 #16 Contacts 4 #12 Contacts 2 1 5 3 7 8 64Q2 2 Quadrax Contacts 60 #22 Contacts 2 #16 Contacts 4 6 10 9 11 13 12 ** In Development Note: Other ARINC Layouts under development. Consult factory for further details. Plug: RR-RR Rec.: RR-RR FR-FR Plug: RR-RR Rec.: FR-FR Plug: RR-RR Rec.: RR-RR FR-FR Plug: RR-RR Rec.: RR-RR FR-FR PIN FRONT ENGAGING FACE Plug: RR-RR Rec.: RR-RR FR-FR ARINC 404, MIL-C-81659 (DPX) A2 4 7 A4 13 18 24 29 3 2 1 2 A1 1 3 4 2 1 6 5 3 5 8 14 19 25 5 A3 PIN FRONT ENGAGING FACE 7 7Q7 (7) #8 Quadrax Contacts ** 13 Q2, 17 Q2, 30 Q2, and 70 Q2 are in development Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 4 PIN FRONT ENGAGING FACE 33Q4M (4) #5 Quadrax Contacts 25 #20HD Contacts 4 #16 contacts 6 G-13 8 7 PIN FRONT ENGAGING FACE 8Q8 (8) #8 Quadrax Contacts Quadrax ARINC 600 (BKA) ca_G1-G14.qxd:Layout 1 2/10/11 9:39 AM Page 14 Cannon Quadrax Contact Data Table of Contents Size 8 Quadrax – ARINC 600, ARINC 404, MIL-C-81659, MIL-DTL-38999 G Quadrax Termination Type Crimp*** Crimp*** Solder (PCB) Solder (PCB) Gender Part Number Type Pin 224-0007-004 Rear Release/Rear Removable (RR-RR) Socket Pin Pin 244-0011-000 224-0007-000 224-0007-012 Rear Release/Rear Removable (RR-RR) Front Release/Front Removable* (FR-FR) Front Release/Front Removable** (FR-FR) * .250 solder extension ** .150 solder post extension *** These contacts are designed to terminate 100 Ohm star Quad 24 AWG 100 Base-T Ethernet Cable with a max OD of .182. For other cable configurations consult factory. Other PCB Solder configurations have been developed. Please contact Customer Service for further details. Size 5 Quadrax – ARINC 404, MIL-C-81659 (33Q4M & 8Q8) Gender Part Number Type Crimp (Cable) Pin 224-0007-005 Rear Release/Rear Removable Crimp (Cable) Socket 244-0011-001 Rear Release/Rear Removable Termination Type Crimping Tools Center Contact Outer Body Tool Handle Die Set/Positioner M22520/2-01 M22520/5-01 M22520/2-37 (Position 5) M22520/5-45 (Position A) Insertion / Removal Tools Termination Type Type Contact Size Insertion Removal Crimp (Cable) RR-RR 8 None Cannon Plastic Tool 323-7004-001 Crimp (Cable) Solder (PCB) RR-RR FR-FR 5 8 None CIET 70369-8 Cannon Plastic Tool 323-7011-000 CIET 70369-8 Filler Plug (for pin or socket crimp contacts) Size 8, Aluminum Alloy with Nickel plating For FR-FR Contacts .032 .027 .100 .090 .274 ∅ .268 .244 ∅ .239 For RR-RR Contacts Part Number 225-1065-001 Part Number 225-1066-000 .179 .173 .025 50° .015 X 40° Chamfer or .025 R .015 2 PL’s Direction of Insertion into the Connector .307 .301 17° 13° .315 ∅ .309 .276 ∅.273 .218 ∅ .213 ∅ .275 .316 .313 ∅ .270 .033 .029 .555 .545 .075 .065 .065 .055 .218 ∅ .213 Dimensions shown in inches (mm) Specifications and dimensions subject to change G-14 www.ittcannon.com