ca_A1-A163.qxd:Layout 1 2/9/11 7:48 PM Page 1 ca_A1-A163.qxd:Layout 1 2/9/11 7:51 PM Page 149 CA-COM Introduction A Circular ITT, Interconnect Solutions connections series CA-COM and CA-COM-B are derivations of connectors according to MIL-C-5015 or VG95234. They were developed especially for industrial applications. Connectors of both CA-COM series are interchangeable with the corresponding types as per MIL-C-5015 and VG95234, as they offer the same mounting dimensions and contact arrangements. The entire CA-COM connector line is RoHS compliant. The CA-COM and CA-COM-B connector series offer: • • • • • Wall mounting receptacles Cable connecting plugs Box mounting receptacles Straight plugs Plugs 90º Wall mounting receptacles and cable connecting plugs (straight and 90º) are available with: • Endbell with cable clamp • Endbell for flex tubes • Adapter combined for PG and metric terminations acc. To DIN 46320 • Adapter for heat shrink boots Furthermore Cannon also provides the appropriate accessories, like: • • • • Protective metal caps Cable clamps Cable bushings Sealing gaskets CA-COM CA-COM-B • Thread coupling • Mateable with all connectors according to MIL-C-5015 and series CA respectively • Either solder or crimp contacts • Contact arrangements with 1 to 37 contacts • Wire sizes from 0, 14 up to 2,5 mm2 • Shells made of aluminum alloy enable to withstand high mechanical strain* • Resilient insulator (polychloroprene) for wide temperature range (-55/125ºC) • Resistant against aggressive fluids like fuel, oil, etc. • Environmental by means of an adaptor for PG termination, universal endbell and heat shrink boots • Min 500 mating cycles • Spray-waterproof IP65 (with grommet) • Bayonet coupling • Mateable with all connectors according to VG95234 and series CA-B respectively • Either solder or crimp contacts • Contact arrangements with 1 to 37 contacts • Wire sizes from 0,14 to 2,5 mm2 • Resilient insulator (polychloroprene) for wide temperature range (-55/125ºC) • Resistant againsts aggressive fluids like fuel, oil, etc. • Environmental by means of an adaptor for PG termination, universal endbell and heat shrink boots • Min 500 mating cycles • Waterproof IP67 (with grommet) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A-149 NOTE: *Receptacle size 14S and barrel size 18 + 20 are made of Zinc dicast material. Aluminum versions available upon request ca_A1-A163.qxd:Layout 1 2/9/11 7:51 PM Page 150 CA-COM Electrical Data Circular A Contact size AWG/metric 15S 15 25 100 Rated Current A max 1) 22 22 41 74 1) This applies only to the max. rated current for one contact. If several contacts in one contact arrangement are loaded with higher current the specific heat and the ambient temperature may not exceed + 125ºC. Rated Current vs ambient temperature 50 A 40 Operating Voltage and connector usage Contact Resistance (Milllivolt test) Rated Current 20ºC ambient temperature Contact size metric 15S 15 25 100 Contact Resistance Ω max 6 6 3 1 When the connectors in this catalog are used for voltages greater than 50 Volts and have touchable conductive shell parts they must be used in accordance with the safety regulations DIN VDE Part 410; IEC 603644-41. This regulation basically dictates that the power source should be turned off before any mating and unmating of the connector. This regulation does not provide protection against electrical shock when mating and unmating the connectors in live condition. Insulation resistance > 1000 MΩ Air and Creepage paths (min) Voltage class Air path mm Creepage path mm Instr. 0,7 0,7 A 1,1 1,1 D 2,8 2,8 25 30 20 15 15S 10 0 20 40 60 80 100 120 ºC Mechanical Data Max Operating Temperature -67°/257°F (-55/125ºC) Mating Cycles Coupling Torque The allowable coupling torque has to be tested under harnessed conditions. min 500 Min seperating force per contact Contact size AWG/metric 15S 15 25 100 Separating force N 1,0 1,0 1,5 3,0 Contact Retention Test force to be applied in mating direction. Contact size metric 15S 15 25 100 Test force N 35 35 55 80 Shell size Allowable coupling torque Closing and opening (N max) CA-COM CA-COM-B 10SL 12S 14S 16S/16 18 20 22 24 28 32 36 3,0 2,8 5,9 7,0 8,0 9,0 10,6 12,9 16,7 18,1 23,9 2,6 2,8 3,0 3,5 4,0 4,5 5,0 6,0 7,0 8,5 10,0 Opening (N min) CA-COM, CA-COM-B 0,15 0,23 0,35 0,46 0,58 0,7 0,8 0,8 0,92 1,02 1,05 Materials Shell Contacts Insulator Grommet Aluminum alloy Zinc dicast nickel plated Copper alloy, silver plated, solder lead free Polychloroprene Polychloroprene Dimensions shown in inches (mm) Specifications and dimensions subject to change A-150 www.ittcannon.com ca_A1-A163.qxd:Layout 1 2/9/11 7:51 PM Page 151 CA-COM How to Order CA CA Shell style 02 - Box mount receptacle 06 - Plug, straight 08 - Plug 90º Class COM-E - Endbell with cable clamp 1) COM-PG - Adapter for PG termination, COM-ME - Adapter for metric thread termination Shell size 10SL, 12S, 14S, 16, 16S, 18 20, 22, 24, 28, 32*, 36* (* = upon request) Contact arrangement see MIL-C-5015 section Contact type P - Pin contact S - Socket contact For contact dimensions please see page A-146 and A-147 of the VG/CA-B section 2 Alternate insert position Insert insulator position – see MIL-C-5015 section Coupling B - Bayonet coupling without designation: threaded coupling Modification 01 - Metric crimp contacts 03 - Adapter for heat shrink boots and metric crimp contacts (only for bayonet coupling by shell style 01 + 06 class-E) 06 - Adapter for heat shrink boots and solder contacts (only for bayonet coupling by shell style 01 + 06 class-E) 44 - With end ring and grommet (for class E and F only) 48 - F-Endbell with O-ring F42 - Without rear accessories DN - Adapter for heat shrink boots and solder contacts (Mod. for threaded coupling) F0 - Without contacts (to be ordered separately) A176 - Gold plated contacts 1) 2) except shell style 02/20 for relevant tools please see page A-148 of VG/CA-B section Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A-151 P P W W B XX XX A Circular Series CA - Cannon designation 06 COM-E 18-1 06 COM-E 18-1 ca_A1-A163.qxd:Layout 1 2/9/11 7:51 PM Page 152 CA-COM Box Mounting Receptacle, Class E oG CA02COM-E-B A oF X øA Circular CA02COM-E-B is a box mounting receptacle for front panel mounting. It mates with plugs CA06COM-B and CA08COM-B. øE with bayonet coupling (1.65 -0.25 mm) 1 max. øH C B D Part No. Pin Insert* A (-0,15) B (+0,4) C (±0,2) D (±0,3) E max. F (±0,1) G (±0,3) H H13 X 15 / Contact size 25 100 CA02COM-E10SL-**-P*-B 0.72 (18.2) 0.56 (14.2) 0.11 (2.8) 0.97 (24.7) 0.64 (16.2) 0.72 (18.2) 1.00 (25.4) 0.13 (3.2) 0.54 (13.6) — — CA02COM-E12S-**-P*-B 0.84 (21.4) 0.56 (14.2) 0.13 (3.2) 0.97 (24.7) 0.64 (16.2) 0.81 (20.6) 1.10 (28.0) 0.13 (3.2) 0.52 (13.2) — — CA02COM-E14S-**-P*-B 0.97 (24.6) 0.56 (14.2) 0.13 (3.2) 0.97 (24.7) 0.76 (19.2) 0.91 (23.0) 1.18 (30.0) 0.13 (3.2) 0.52 (13.2) — — CA02COM-E16S-**-P*-B 1.08 (27.4) 0.56 (14.2) 0.13 (3.2) 0.97 (24.7) 0.88 (22.4) 0.97 (24.6) 1.28 (32.5) 0.13 (3.2) 0.52 (13.2) — — CA02COM-E16-**-P*-B 1.08 (27.4) 0.75 (19.0) 0.13 (3.2) 1.33 (33.8) 0.88 (22.4) 0.97 (24.6) 1.28 (32.5) 0.13 (3.2) 0.70 (17.9) 0.70 (17.9) 0.77 (19.5) CA02COM-E18-**-P*-B 1.21 (30.8) 0.75 (19.0) 0.16 (4.0) 1.33 (33.8) 1.01 (25.6) 1.06 (27.0) 1.38 (35.0) 0.13 (3.2) 0.67 (17.1) 0.67 (17.1) 0.74 (18.7) CA02COM-E20-**-P*-B 1.35 (34.2) 0.75 (19.0) 0.16 (4.0) 1.33 (33.8) 1.14 (29.0) 1.16 (29.4) 1.49 (38.0) 0.13 (3.2) 0.67 (17.1) 0.67 (17.1) 0.74 (18.7) CA02COM-E22-**-P*-B 1.47 (37.4) 0.75 (19.0) 0.16 (4.0) 1.33 (33.8) 1.27 (32.2) 1.25 (31.8) 1.16 (41.0) 0.13 (3.2) 0.67 (17.1) 0.67 (17.1) 0.74 (18.7) CA02COM-E24-**-P*-B 1.61 (40.9) 0.81 (20.6) 0.16 (4.0) 1.33 (33.8) 1.40 (35.3) 1.37 (34.9) 1.75 (44.5) 0.15 (3.7) 0.61 (15.5) 0.61 (15.5) 0.67 (17.1) CA02COM-E28-**-P*-B 1.84 (46.7) 0.81 (20.6) 0.16 (4.0) 1.33 (33.8) 1.63 (41.4) 1.56 (39.7) 2.00 (50.8) 0.15 (3.7) 0.61 (15.5) 0.61 (15.5) 0.67 (17.1) CA02COM-E32-**-P*-B 2.10 (53.4) 0.87 (22.2) 0.16 (4.0) 1.33 (33.8) 1.88 (47.8) 1.75 (44.5) 2.24 (57.0) 0.17 (4.3) 0.55 (13.9) 0.61 (15.5) 0.61 (15.5) CA02COM-E36-**-P*-B 2.35 (59.6) 0.87 (22.2) 0.16 (4.0) 1.33 (33.8) 2.07 (52.6) 1.94 (49.2) 2.50 (63.5) 0.17 (4.3) 0.55 (13.9) 0.61 (15.5) 0.61 (15.5) OG CA02COM-E OF with threaded coupling (1.65 -0.25 mm) X øE øA CA02COM-E is a box mounting receptacle for front panel mounting. It mates with plugs CA06COM and CA08COM. 1 max. øH C B D Part No. Pin Insert* A Thread B (+0,4) C (±0,3) D max. E max. F (±0,1) G (±0,3) H (+0,2) X 15 / Contact size 25 100 CA02COM-E10SL-**-P* 5/8-24UNEF-2A 0.56 (14.2) 0.11 (2.8) 0.99 (25.1) 0.63 (15.9) 0.72 (18.2) 1.00 (25.4) 0.12 (3.1) 0.54 (13.6) — — CA02COM-E12S-**-P* 3/4-20UNEF-2A 0.56 (14.2) 0.13 (3.2) 0.99 (25.1) 0.63 (15.9) 0.81 (20.6) 1.10 (28.0) 0.12 (3.1) 0.52 (13.2) — — CA02COM-E14S-**-P* 7/8-20UNEF-2A 0.56 (14.2) 0.13 (3.2) 0.99 (25.1) 0.75 (19.0) 0.91 (23.0) 1.18 (30.0) 0.12 (3.1) 0.52 (13.2) — — CA02COM-E16S-**-P* 1-20UNEF-2A 0.56 (14.2) 0.13 (3.2) 0.99 (25.1) 0.87 (22.2) 0.97 (24.6) 1.28 (32.5) 0.12 (3.1) 0.52 (13.2) — — CA02COM-E16-**-P* 1-20UNEF-2A 0.75 (19.0) 0.13 (3.2) 1.35 (34.2) 0.87 (22.2) 0.97 (24.6) 1.28 (32.5) 0.12 (3.1) 0.70 (17.9) 0.70 (17.9) 0.77 (19.5) CA02COM-E18-**-P* 1-1/8-18UNEF-2A 0.75 (19.0) 0.16 (4.0) 1.35 (34.2) 1.00 (25.4) 1.06 (27.0) 1.38 (35.0) 0.12 (3.1) 0.67 (17.1) 0.67 (17.1) 0.74 (18.7) CA02COM-E20-**-P* 1-1/4-18UNEF-2A 0.75 (19.0) 0.16 (4.0) 1.35 (34.2) 1.14 (29.0) 1.16 (29.4) 1.49 (38.0) 0.12 (3.1) 0.67 (17.1) 0.67 (17.1) 0.74 (18.7) CA02COM-E22-**-P* 1-3/8-18UNEF-2A 0.75 (19.0) 0.16 (4.0) 1.35 (34.2) 1.27 (32.2) 1.25 (31.8) 1.61 (41.0) 0.12 (3.1) 0.67 (17.1) 0.67 (17.1) 0.74 (18.7) CA02COM-E24-**-P* 1-1/2-18UNEF-2A 0.81 (20.6) 0.16 (4.0) 1.35 (34.2) 1.39 (35.3) 1.37 (34.9) 1.75 (44.5) 0.15 (3.7) 0.61 (15.5) 0.61 (15.5) 0.67 (17.1) CA02COM-E28-**-P* 1-3/4-18UNEF-2A 0.81 (20.6) 0.16 (4.0) 1.35 (34.2) 1.62 (41.2) 1.56 (39.7) 2.00 (50.8) 0.15 (3.7) 0.61 (15.5) 0.61 (15.5) 0.67 (17.1) CA02COM-E32-**-P* 2-18UNS-2A 0.87 (22.2) 0.16 (4.0) 1.35 (34.2) 1.87 (47.6) 1.75 (44.5) 2,24 (57.0) 0.17 (4.4) 0.55 (13.9) 0.55 (13.9) 0.61 (15.5) CA02COM-E36-**-P* 2-1/4-16UN-2A 0.87 (22.2) 0.16 (4.0) 1.35 (34.2) 2.06 (52.4) 1.94 (49.2) 2.50 (63.5) 0.17 (4.4) 0.55 (13.9) 0.55 (13.9) 0.61 (15.5) * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages A-135 and A-136) Dimensions shown in inches (mm) Specifications and dimensions subject to change A-152 www.ittcannon.com ca_A1-A163.qxd:Layout 1 2/9/11 7:51 PM Page 153 CA-COM Straight Plug, Class PG/ME CA06COM-PG/ME-B ( with bayonet coupling mm) Circular CA06COM-PG/ME-B is a straight plug for usage of PG and metric terminations. It mates with receptacles CA00COM-B, CA01COM-B and CA02COM-E-B. Part No. Pin Insert* CA06COM-XX-10SL-**-P*-B CA06COM-XX-12S-**-P*-B CA06COM-XX-14S-**-P*-B CA06COM-XX-16S-**-P*-B CA06COM-XX-16-**-P*-B CA06COM-XX-18-**-P*-B CA06COM-XX-20-**-P*-B CA06COM-XX-22-**-P*-B CA06COM-XX-24-**-P*-B CA06COM-XX-28-**-P*-B CA06COM-XX-32-**-P*-B CA06COM-XX-36-**-P*-B B PG Thread PG9 PG9 PG11 PG13,5 PG13,5 PG13,5 PG16 PG16 PG16 PG21 PG29 PG29 C max. 0.71 (18) 0.75 (19) 0.87 (22) 0.94 (24) 0.94 (24) 0.98 (25) 1.06 (27) 1.06 (27) 1.06 (27) 1.26 (32) 1.61 (41) 1.61 (41) B Metric thread dim. M16x1,5 M16x1,5 M20x1,5 M20x1,5 M20x1,5 M20x1,5 M25x1,5 M25x1,5 M32x1,5 M32x1,5 M40x1,5 C max. metric 0.85 (21.5) 0.89 (22.5) 0.98 (25.0) 1.04 (26.5) 1.04 (26.5) 1.22 (31.0) 1.34 (34.0) 1.57 (40.0) 1.57 (40.0) 1.61 (41.0) 1.91 (48.5) upon request upon request For other dimensions see CA6COM-EB CA06COM-PG/ME ( with threaded coupling CA06COM-PG/ME is a straight plug for usage of PG and metric terminations. It mates with receptacles CA00COM, CA01COM and CA02COM-E. Part No. Pin Insert* CA06COM-XX-10SL-**-P* CA06COM-XX-12S-**-P* CA06COM-XX-14S-**-P* CA06COM-XX-16S-**-P* CA06COM-XX-16-**-P* CA06COM-XX-18-**-P* CA06COM-XX-20-**-P* CA06COM-XX-22-**-P* CA06COM-XX-24-**-P* CA06COM-XX-28-**-P* CA06COM-XX-32-**-P* CA06COM-XX-36-**-P* B PG Thread PG9 PG9 PG11 PG13,5 PG13,5 PG13,5 PG16 PG16 PG16 PG21 PG29 PG29 C max. 0.71 (18) 0.75 (19) 0.87 (22) 0.94 (24) 0.94 (24) 0.98 (25) 1.06 (27) 1.06 (27) 1.06 (27) 1.26 (32) 1.61 (41) 1.61 (41) * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages A-135 and A-136) XX: Please choose PG or ME For other dimensions see CA6COM-E Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A A-153 B Metric thread dim. M16x1,5 M16x1,5 M20x1,5 M20x1,5 M20x1,5 M20x1,5 M25x1,5 M25x1,5 M32x1,5 M32x1,5 M40x1,5 C max. metric 0.85 (21.5) 0.89 (22.5) 0.98 (25.0) 1.04 (26.5) 1.04 (26.5) 1.22 (31.0) 1.34 (34.0) 1.57 (40.0) 1.57 (40.0) 1.61 (41.0) 1.91 (48.5) upon request upon request mm) ca_A1-A163.qxd:Layout 1 2/9/11 7:51 PM Page 154 CA-COM Straight Plug, Class E A ( 2±0.25 mm) CA06COM-E-B øB CA06COM-E-B is a straight plug with endbell and cable clamp. It mates with receptacles CA00COM-B, CA01COM-B and CA02COM-E-B. øA Circular with bayonet coupling 1 max. C Part No. Pin Insert* CA06COM-E10SL-**-P*-B CA06COM-E12S-**-P*-B CA06COM-E14S-**-P*-B CA06COM-E16S-**-P*-B CA06COM-E16-**-P*-B CA06COM-E18-**-P*-B CA06COM-E20-**-P*-B CA06COM-E22-**-P*-B CA06COM-E24-**-P*-B CA06COM-E28-**-P*-B CA06COM-E32-**-P*-B CA06COM-E36-**-P*-B A max. 0.90 (22.8) 1.02 (26.0) 1.15 (29.2) 1.26 (32.0) 1.26 (32.0) 1.44 (36.5) 1.57 (39.9) 1.70 (43.1) 1.83 (46.6) 2.10 (53.4) 2.37 (60.1) 2.61 (66.3) B1) C max. 2.09 (53) 2.09 (53) 2.17 (55) 2.20 (56) 2.60 (66) 2.68 (68) 2.68 (68) 2.68 (68) 2.99 (76) 2.99 (76) 2.99 (76) 2.99 (76) 0.31 (7.9) 0.31 (7.9) 0.44 (11.1) 0.56 (14.2) 0.56 (14.2) 0.62 (15.8) 0.75 (19.0) 0.75 (19.0) 0.93 (23.7) 0.93 (23.7) 1.25 (31.8) 1.36 (34.6) ( 2±0.25 mm) CA06COM-E øC øB CA06COM-E is a straight plug with endbell and cable clamp. It mates with receptacles CA00COM, CA01COM and CA02COM-E. øA with threaded coupling 1max. D Part No. Pin Insert* CA06COM-E10SL-**-P* CA06COM-E12S-**-P* CA06COM-E14S-**-P* CA06COM-E16S-**-P* CA06COM-E16-**-P* CA06COM-E18-**-P* CA06COM-E20-**-P* CA06COM-E22-**-P* CA06COM-E24-**-P* CA06COM-E28-**-P* CA06COM-E32-**-P* CA06COM-E36-**-P* A max. 0.95 (24.1) 1.02 (25.8) 1.13 (28.8) 1.25 (31.8) 1.25 (31.8) 1.34 (34.1) 1.47 (37.4) 1.59 (40.5) 1.72 (43.8) 1.98 (50.2) 2.22 (56.4) 2.47 (62.8) B Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B C1) max. 0.31 (7,9) 0.31 (7,9) 0.44 (11.1) 0.56 (14.2) 0.56 (14.2) 0.62 (15.8) 0.75 (19.0) 0.75 (19.0) 0.93 (23.7) 0.93 (23.7) 1.25 (31.8) 1.36 (34.6) D max. 2.09 (53) 2.09 (53) 2.17 (55) 2.20 (56) 2.60 (66) 2.68 (68) 2.68 (68) 2.68 (68) 2.99 (76) 2.99 (76) 2.99 (76) 2.99 (76) * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages A-135 and A-136) 1 Max Cable Diameter Dimensions shown in inches (mm) Specifications and dimensions subject to change A-154 www.ittcannon.com ca_A1-A163.qxd:Layout 1 2/9/11 7:51 PM Page 155 CA-COM 90º Plug, Class PG ( 2±0,25 mm) CA08COM-PG-B A D CA08COM-PG-B designates a 90º plug for usage of PG terminations. It mates with receptacles CA01COM-B and CA02COM-B. 1 max. øE C Part No. Pin Insert* CA08COM-E10SL-**-P*-B CA08COM-E12S-**-P*-B CA08COM-E14S-**-P*-B CA08COM-E16S-**-P*-B CA08COM-E16-**-P*-B CA08COM-E18-**-P*-B CA08COM-E20-**-P*-B CA08COM-E22-**-P*-B A max. 0.90 (22.8) 1.02 (26.0) 1.15 (29.2) 1.26 (32.0) 1.26 (32.0) 1.44 (36.5) 1.57 (39.9) 1.70 (43.1) B -0,3 0.44 (11.3) 0.55 (14.0) 0.67 (17.1) 0.80 (20.4) 0.80 (20.4) 0.93 (23.6) 1.05 (26.7) 1.17 (29.8) C max 2.24 (57) 2.24 (57) 2.32 (59) 2.48 (63) 2.83 (72) 3.03 (77) 3.23 (82) 3.23 (82) D 0.73 0.73 0.77 0.87 0.87 1.04 1.14 1.16 E (18.5) (18.5) (19.5) (22.0) (22.0) (26.3) (29.0) (29.5) PG9 PG9 PG11 PG13,5 PG13,5 PG16 PG21 PG21 Metric thread option not available. CA08COM-PG ( 2 ±0,25 mm) D CA08COM-PG designates a 90º plug for usage of PG terminations. It mates with receptacles CA01COM and CA02COM. øA øB with threaded coupling 1 max. øE C Part No. Pin Insert* CA08COM-E10SL-**-P* CA08COM-E12S-**-P* CA08COM-E14S-**-P* CA08COM-E16S-**-P* CA08COM-E16-**-P* CA08COM-E18-**-P* CA08COM-E20-**-P* CA08COM-E22-**-P* A max. 0.95 (24.1) 1.02 (25.8) 1.13 (28.8) 1.25 (31.8) 1.25 (31.8) 1.34 (34.1) 1.47 (37.4) 1.59 (40.5) B Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-20UNEF-2B 1-1/8-20UNEF-2B 1-1/4-20UNEF-2B 1-3/8-20UNEF-2B C max. 2.24 (57) 2.24 (57) 2.32 (59) 2.48 (63) 2.83 (72) 3.03 (77) 3.23 (82) 3.23 (82) * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages A-135 and A-136) Metric thread option not available. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A-155 D 0.73 0.73 0.77 0.87 0.87 1.04 1.14 1.16 (18.5) (18.5) (19.5) (22.0) (22.0) (26.3) (29.0) (29.5) E PG9 PG9 PG11 PG13,5 PG13,5 PG16 PG21 PG21 Circular øA øB with bayonet coupling ca_A1-A163.qxd:Layout 1 2/9/11 7:51 PM Page 156 CA-COM Accessories B A L Protective caps Circular for receptacles with bayonet coupling CA00COM-B, CA02COM-E-B and CA20COM-E-B T D C002 Part No. Shell size CA121003-1701 CA121003-1702 CA121003-1703 CA121003-1704 CA121003-1705 CA121003-1706 CA121003-1707 CA121003-1708 CA121003-1709 CA121003-1710 CA121003-1711 CA121003-1712 B ±0,3 (19.5) (19.5) (19.5) (19.5) (24.5) (24.5) (24.5) (24.5) (24.5) (24.5) (24.5) (24.5) 10 SL 12S 14S 16S 16 18 20 22 24 28 32 36 D max (22.4) (25.6) (28.8) (31.6) (31.6) (35.7) (39.1) (42.3) (45.8) (51.6) (58.3) (64.5) L ±0,25 (107) (107) (107) (107) (120) (120) (134) (134) (134) (176) (176) (176) T +0,25 (4.3) (4.3) (4.3) (4.3) (4.3) (4.3) (4.3) (4.3) (4.3) (5.5) (5.5) (5.5) L B Protective caps for receptacles with threaded coupling CA00COM, CA02COM-E and CA20COM D T A C004 Part No. CA121003-1601 CA121003-1602 CA121003-1603 CA121003-1604 CA121003-1606 CA121003-1607 CA121003-1608 CA121003-1609 CA121003-1610 CA121003-1611 CA121003-1612 Shell size 10 SL 12S 14S 16S, 16 18 20 22 24 28 32 36 A Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNEF-2B 2-18UNS-2B 2-1/4-16UN-2B B max 0.63 (16,0) 0.63 (16,0) 0.63 (16,0) 0.63 (16,0) 0.63 (16,0) 0.63 (16,0) 0.63 (16,0) 0.63 (16,0) 0.71 (18,0) 0.71 (18,0) 0.71 (18,0) D max. 0.80 (20.2) 0.92 (23,4) 1.05 (26.6) 1.17 (29.8) 1.30 (32.9) 1.42 (36.1) 1.55 (39.4) 1.68 (42.6) 1.93 (48.9) 2.18 (55.3) 2.43 (61.6) L max. 4.49 (114) 5.00 (127) 5.00 (127) 5.00 (127) 5.00 (127) 5.55 (141) 5.55 (141) 6.06 (154) 8.83 (214) 8.83 (214) 8.83 (214) T +0,2 0.14 (3.6) 0.14 (3.6) 0.14 (3.6) 0.14 (3.6) 0.14 (3.6) 0.14 (3.6) 0.14 (3.6) 0.17 (4.4) 0.17 (4.4) 0.19 (4.8) 0.19 (4.8) Dimensions shown in inches (mm) Specifications and dimensions subject to change A-156 www.ittcannon.com