Cannon Trident Connectors Ringlock Circular Connectors Test Specifications The table below summarizes the results of key tests. Data is applicable to standard connectors with standard contacts. Variations may affect this data, so please consult factory for further information on your requirements. Test Method Criteria of Acceptance Dielectric Withstanding Voltage 1550 V ac for 60 seconds 2500 V ac for 60 seconds (Size 1807 only) -55°C to +125°C (-67°F to +257°F), 5 cycles No breakdown No breakdown No physical damage. Vibration 50 g’s peak, 3 axes, 11 millisecond duration half-sine pulse 10 g’s peak,10-500 Hz, 9 hours No No No No Durability 500 cycles of mating and unmating, 500 mating cycles max Salt Spray No mechanical or Electrical defects 48 hours Shall be capable of mating and unmating High Temperature Endurance 1000 hours at 125°C (+257°F) Insulation Resistance > 100 MΩ Humidy Steady State Moisture Resistance RH 90-95%, 40°C(+104°F), 504 hours 10 Cycles Insulation Resistance > 100 MΩ Insulation Resistance > 100 MΩ Thermal Shock Physical Shock physical damage. loss of continuity >1 sec physical damage. loss of continuity >1 sec and meet contact resistance requirements How to Order-Connectors Typical Nomenclature: TR 16 19 P M S 1 N B Series TR = Trident Ringlock Shell Size 10 12 14 16 18 18 20 22 24 Color B = Black Number of Contacts 04 08 12 19 07 23 28 35 48 Material N = Nylon Series Identification 1 = Standard S = Standard H = Interface Sealing* P = Plastic Coupling Nut** M = Accepts Male Contacts F = Accepts Female Contacts * Receptacle only ** Shell size 16 and 24 only P R = Plug = Receptacle Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 27 Cannon Trident Connectors How to Order-Accessories Typical Nomenclature: TR Ringlock Circular Accessories 10 A HC 1 Series TR = Trident Ringlock Material N = Nylon Shell Size Series Identification 1 = Standard 10 12 14 16 18 20 22 24 A N HC = SR = AD = Sealed Cable Clamp Unsealed Cable Clamp Heat Shrink Adapter = Accessory How to Order-Dust Caps Typical Nomenclature: TNA 10 DCR0 - 00 B Packaging B = Bulk L = Single Pack Series TNA = Trident Neptune Accessory (Ringlock Compatible) Shell Size 10 12 14 16 18 20 22 24 Accessory Style, Type and Size Dust Cap DC R0-00 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 33 Unsealed Dust Cap, Receptacle (PAD)*