Cannon Trident Connectors Neptune Circular Connectors Test Specifications The table below summarizes the results of key tests. Data is applicable to standard connectors with standard contacts. Variations may affect this data, so please consult factory for further information on your requirements. Test Method Criteria of Acceptance Dielectric Withstanding Voltage Thermal Shock Physical Shock 2000 V ac -55°C to +120°C (-67°F to +248°F) 40 g’s peak, 3 axes, 6 millisecond duration half-sine pulse No No No No Vibration 10 g’s peak,10-500 Hz Durability 500 cycles of mating and unmating, 500 mating cycles max 48 hours No physical damage, No loss of continuity >10 sec No mechanical or electrical defects Shall be capable of mating and unmat ing and meet contact resistance requirements Insulation Resistance > 100 MW Salt Spray High Temperature Endurance 1000 hours at 85°C (+185°F) 250 hours at 120°C (+248°F) RH 90-95%, 40°C (+104°F), 504 hours Humidy Steady State breakdown physical damage physical damage. loss of continuity >10 sec Insulation Resistance > 100 MW How to Order-Connectors Typical Nomenclature: TN 7 S 24 - 1219 P Series TN = Trident Neptune 01 * = Standard 01= Jam Nut Receptacles bulk packages are delivered without nut See page 50 for Spare Jam Nuts = Flange Receptacle (4 holes) = Plug = Jam Nut Receptacle Packaging B = Bulk (100 pcs) L = Single Pack Sealing Class Connector Finish Materials 1 = Standard (Nickel Plated Metal Parts) 2 = Plastic Coupling Nut (TN plug shell sizes 16 and 24 only) G = Grommet, no nut L = Large Grommet, extender and nut (Size 24-0048 only, Jam Nut Receptacle not supported ) S = With Grommet and nut U = Unsealed Shell Size and Contact Arrangement Shell Size Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com B Modification Shell Style 0 6 7 1 Number of Power Contacts Number of Signal Contacts 14 - 00 12 16 - 00 19 16 - 02 13 24 - 12 19 24 - 04 20 24 - 04 28 24 - 00 48 37 Contact Type P = Pin S = Socket Cannon Trident Connectors Neptune Circular Accessories How to Order-Accessories Typical Nomenclature: TNA 24 CA01 - 20 L Packaging B = Bulk L = Single Pack Series TNA = Trident Neptune Accessory Shell Size Accessory Style, Type, and Size 14 16 24 ** Blanking Plug Conduit Adapter CA 01-xx Type 1, xx=diameter of conduit* CA 02-xx Type 2, xx=diameter of conduit* CA 03-xx Type 3, xx=diameter of conduit* CC HC-00 Sealed CC SR-00 Unsealed 01-00 Flange Type PG Dust Cap DC 03-00 Jam Nut Type P0-00 Sealed Dust Cap, Plug DC Spare Jam Nut R0-01 Sealed Dust Cap, Receptacle (Top Hat)*** Cable Clamp Panel Gasket PG JN 00-00 Blanking Plug BP SG-00 *** Can be sealed up to IP 67 *Conduit Adapter Sizes Shell Size Type Diameter (mm) 14 01 12 16 01 20 16 02 18 24 01 20 24 01 25 24 02 25 24 02 26 24 03 34 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 47 For Signal Holes