Cannon Trident Connectors Snap Together - Rectangular How to Order Typical Nomenclature: TST 02 P A 0 0 * Series TST = Trident Snap Together Plating Style T = Tin Y = Gold Z = Gold Flash * = None (no contacts) Number of Contacts 02 03 04 06 12 24 36 Contact Type 0 = No Contacts (Standard for Plug and Panel Mounted Receptacle) 1 = Machined Solder Tail Pin 2 = Machined Solder Tail Socket 5 = Formed Stamped Solder Tail Pin 6 = Formed Stamped Solder Tail Socket Color of Moulding 0 = Black Type PA Plug; Free RB Receptacle; For PCB, with Mounting Lugs Receptacle; Panel Mounting (delivered without any contacts) Receptacle, For PCB, 90° Right Angle Mounting (only for 12 position connectors with machined contacts) RA RR AS Accessory; Receptacle Shroud AH Accessory; Plug Strain Relief Hood Test Specifications The table below summarizes the results of key tests. Data is applicable to standard connectors with standard contacts. Variations may affect this data, so please consult factory for further information on your requirements. Test Method Criteria of Acceptance Dielectric Withstanding Voltage Thermal Shock Physical Shock 2000 V ac -55°C to +125°C (-67°F to +257°F), 5 cycles 50 g’s peak, 3 axes, 11 millisecond duration half-sine pulse No No No No Vibration Salt Spray 10 g’s peak, 10-500 Hz, 9 hours 500 cycles of mating and unmating, 500 mating cycles max 48 hours No physical damage, No loss of continuity >1 sec No mechanical or electrical defects Shall be capable of mating and unmating and meet contact resistance requirements High Temperature Endurance 1000 hours at 125°C (+257°F) Insulation Resistance > 100 MΩ Humidy Steady State Moisture Resistance RH 90-95%, 40°C (+104°F), 504 hours 10 Cycles Insulation Resistance > 100 MΩ Insulation Resistance > 100 MΩ Durability breakdown physical damage physical damage. loss of continuity >1 sec Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 8