MIL-DTL-38999 Series I, II, III, IV Filter Connectors Chip-on-Flex Table of Contents Wall Mount Receptacle: MIL-DTL-38999 Series III CFKJA0 S R1 Z R2 B THREAD T 4 PLACES TT 4 PLACES MS Shell Shell size Code Size B Thread Class 2A (Plated) M +.000 (.000) -.005 (.130) W MAX. M V THREAD BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) .230 MAX PANEL THICKNESS (including mounting hardw .520 (13.20) MAX RED BAND (FULLY MATED INDICTAOR BAND) T TT S +.004 (.100) +.004 (.100) +_.012 (.300) -.002 (.050) -.002 (.050) Metric V Thread (Plated) W Max. Z +.005 (.130) -.010 (.250) R 1 R 2 9 A .6250-0.1P-0.3L-TS .820 (20.83) .719 (18.26) .594 (15.09) .938 (23.83) .128 (3.25) .216 (5.49) M12X1-6g0.100R .098 (2.50) 1.235 (31.36) 11 B .7500-0.1P-0.3L-TS .820 (20.83) .812 (20.62) .719 (18.26) 1.031 (26.19) .128 (3.25) .194 (4.93) M15X1-6g0.100R .098 (2.50) 1.235 (31.36) 13 C .8750-0.1P-0.3L-TS .820 (20.83) .906 (23.01) .812 (20.62) 1.125 (28.58) .128 (3.25) .194 (4.93) M18X1-6g0.100R .098 (2.50) 1.235 (31.36) 15 D 1.0000-0.1P-0.3L-TS .820 (20.83) .969 (24.61) .906 (23.01) 1.219 (30.96) .128 (3.25) .173 (4.39) M22X1-6g0.100R .098 (2.50) 1.235 (31.36) 17 E 1.1875-0.1P-0.3L-TS .820 (20.83) 1.062 (26.97) .969 (24.61) 1.312 (33.32) .128 (3.25) .194 (4.93) M25X1-6g0.100R .098 (2.50) 1.235 (31.36) 19 F 1.2500-0.1P-0.3L-TS .820 (20.83) 1.156 (29.36) 1.062 (26.97) 1.438 (36.53) .128 (3.25) .194 (4.93) M28X1-6g0.100R .098 (2.50) 1.235 (31.36) 21 G 1.3750-0.1P-0.3L-TS .790 (20.07) 1.250 (31.75) 1.156 (29.36) 1.562 (39.67) .128 (3.25) .194 (4.93) M31X1-6g0.100R .126 (3.20) 1.235 (31.36) 23 H 1.5000-0.1P-0.3L-TS .790 (20.07) 1.375 (34.92) 1.250 (31.75) 1.688 (42.88) .154 (3.91) .242 (6.15) M34X1-6g0.100R .126 (3.20) 1.235 (31.36) 25 J 1.6250-0.1P-0.3L-TS .790 (20.07) 1.500 (38.10) 1.375 (34.92) 1.812 (46.02) .154 (3.91) .242 (6.15) M37X1-6g0.100R .126 (3.20) 1.235 (31.36) Jam Nut Receptacle: MIL-DTL-38999 Series III CFKJA7 M A P S B THREAD C S FLAT Filter M Z +.005 (.130) +.005 (.130) -.040 (.100) -.004 (.100) P +.016 (.410) -.004 (.100) BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) V THREAD R THREAD .520 (13.2) MAX. RED BAND (FULLY MATED INDICATOR BAND) MS A Shell Shell size +.010 (.250) Code -.005 (.130) Size Z .062 (1.57) MIN./.125 (3.18) MAX. PANEL THICKNESS S Metric R Thread (Plated) 9 A .104 (2.64) .6250-0.1P-0.3L-TS .651 (16.53) 1.243 (31.57) .871 (22.12) .555 (14.10) 1.062 (26.97) M17X1-6g0.100R M12X1-6g0.100R 11 B .104 (2.64) .7500-0.1P-0.3L-TS .751 (19.07) 1.243 (31.57) .871 (22.12) .555 (14.10) 1.250 (31.75) M20X1-6g0.100R M15X1-6g0.100R 13 C .104 (2.64) .8750-0.1P-0.3L-TS .938 (23.82) 1.243 (31.57) .878 (22.30) .563 (14.30) 1.375 (34.92) M25X1-6g0.100R M18X1-6g0.100R 15 D .104 (2.64) 1.0000-0.1P-0.3L-TS 1.062 (26.97) 1.243 (31.57) .878 (22.30) .563 (14.30) 1.500 (38.10) M28X1-6g0.100R M22X1-6g0.100R 17 E .104 (2.64) 1.1875-0.1P-0.3L-TS 1.187 (30.15) 1.243 (31.57) .878 (22.30) .563 (14.30) 1.625 (41.28) M32X1-6g0.100R M25X1-6g0.100R 19 F .135 (3.43) 1.2500-0.1P-0.3L-TS 1.312 (33.32) 1.243 (31.57) .878 (22.30) .563 (14.30) 1.812 (46.02) M35X1-6g0.100R M28X1-6g0.100R 21 G .135 (3.43) 1.3750-0.1P-0.3L-TS 1.437 (36.50) 1.243 (31.57) .878 (22.30) .563 (14.30) 1.938 (49.23) M38X1-6g0.100R M31X1-6g0.100R 23 H .135 (3.43) 1.5000-0.1P-0.3L-TS 1.562 (39.67) 1.243 (31.57) .878 (22.30) .563 (14.30) 2.062 (52.37) M41X1-6g0.100R M34X1-6g0.100R 25 J .135 (3.43) 1.6250-0.1P-0.3L-TS 1.687 (42.85) 1.243 (31.57) .878 (22.30) .563 (14.30) 2.188 (55.38) M44X1-6g0.100R M37X1-6g0.100R B Thread Class 2A (Plated) C +.004 (.100) -.010 (.250) Metric V Thread (Plated) Note: Currently designed for MIL-DTL-38999 Series III. This can be provided for MIL-C-38999 I, II, and III. Please contact Customer Service. F Dimensions shown in inches (mm) Specifications and dimensions subject to change F-20 www.ittcannon.com MIL-DTL-38999 Series I, II, III, IV Filter Connectors These miniature circular filter connectors are designed to combine the functions of a standard electrical connector and a feed-thru filter into one compact package. They are designed and can be provided with planar array capacitor or Chip-on-flex technology to meet the applicable portions of military specification MIL-DTL-38999 series I, II, III and IV. These connectors feature arrangements that will accommodate up to 12B contacts. How to Order - TKJL/TKJ/TKJA/TKJB TKJ L O C * A * L P N * FILTER SERIES PREFIX MODIFIER SHELL STYLE TERMINATION SHELL SIZE HARDWARE FINISH CONTACT ARRANGEMENTS CAPACITANCE INDICATOR CONTACT TYPE ALTERNATE SHELL POSITION SPECIAL MODIFIERS FILTER SERIES PREFIX TKJ - ITT Cannon prefix MODIFIER L - Series I scoop-proof shell (omit if Series II desired) A - Series III Triple Start Thread (omit if Series II desired) B - Series IV - Available in receptacle only (omit if Series II desired) CAPACITANCE INDICATOR* L - 32,000-45,000 PF M - 8,000-12,000 PF T - 3,300-5,000 PF H - 850- 1,300 PF SHELL SIZE Series I, III and IV: 11, 13, 15, 17, 19, 21, 23, and 25 Series II: 10, 12, 14, 16, 18, 20, 22, and 24 CONTACT TYPE P-pin; S-socket HARDWARE FINISH A - Bright cadmium over nickel plate B - Olive drab cadmium over nickel plate N - Electroless nickel plate (preferred) SPECIAL MODIFIERS Consult Customer Service for definition and availability CONTACT ARRANGEMENTS See page 22. NOTES: 1) Backshell thread and teeth. Series I and II - Provided only on shell types indicated on dimension sheets. Series III - No threads or teeth provided. Series IV - Provided with threads and teeth. 2) Hermetic versions of the filter connectors can be provided. Contact Customer Service for availability. 3) Series III and IV can only be shell style 0 or 7. F Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com ALTERNATE SHELL POSITION N (normal), A, B, C, D Filter SHELL STYLE 0 - Wall mounting receptacle (front panel mounting) 2 - Box mounting (front panel mounting) 3 - Wall mounting (black panel mounting) 5 - Box mounting receptacle (back panel mounting) 7 - Jam nut receptacle TERMINATION C - Solder pot termination E - P.C. tails S - Crimp Piggyback W - Wire wraps F-21 MIL-DTL-38999 Series I, II, III, IV Filter Connectors Table Contents Performance and of Material Specifications MATERIALS AND FINISHES Shell Insulator Contacts Grommet and Seal Jam Nut Grounding Spring Aluminum alloy* High grade plastic/epoxy Copper alloy, gold plate Silicone base elastomer Aluminum alloy* Beryllium copper, gold plate *Finish as noted in How to Order section. ELECTRICAL (Size #16, #20 and #22) Filter Description Low Freq. Mid Freq. High Freq. Std. Freq. Catalog Indicator L M H T 200 VDC - 120 VAC rms 400 Hz Voltage Rating Current Rating (amp DC) 15 amp - size 16/7.5 amp - size 20/5.0 amp, size 22 Insulation Resistance, 2 min. electrification time max. at 25˚C 5,000 megohms min. @ 100 VDC 300 VDC size 22 DWV, sea level, with 500 microamps max. 500 VDC 500 VDC size 16 & 20 charge/discharge 32,000 8,000 3300 850 Capacitance at 1 KHz, 0.1 V rms Picofarads Freq. MHz 0.1 1 2 10 100 500 to 1000 Attenuation per MIL-STD-220 at 25˚C with no applied voltage or current. 45,000 12,000 5000 1,300 2 min. 10 min. 16 min. 40 min. 60 min. 60 min. 2 min. 7 min. 18 min. 55 min. 60 min. Pi 2 min. 8 min. 45 min. 55 min. Pi 2 min. 30 min. 50 min. Pi Filter Type/Construction Pi Consult factory for higher or mixed attenuation values and higher voltage ratings. Contact Extension - All Connectors REAR OF METAL SHELL SOLDER POT EXTENSION Note: Solder pot extension typically will be .200 (5.08) max. beyond shell rear. Contact - Pin and Sockets Standard Contact Terminations Finish: Gold plate per MIL-G-45204, Type 1, Class 1, over nickel plate per QQ-N-290. A C DIA. Pin/Solder Pot B DIA. .186 (4.72) MAX. DIA. .020 (.51) X.250 (6.35) EXT. BEYOND SHELL REAR B C DIA. DIA. Filter Pin/Printed Circuit Socket/Solder Pot .025 (.64) SQ. X .500 (12.70) EXT. BEYOND SHELL REAR Pin/Square Post Contact Size A .115 (2.92) .095 (2.41) .125 (3.18) .110 (2.79) .170 (4.32) .150 (3.81) #22 #20 #16 F B Dia. .039 (0.97) .035 (0.89) .047 (1.19) .042 (1.07) .077 (1.96) .068 (1.73) C Dia. .056 (1.42) .051 (1.30) .066 (1.68) .061 (1.55) .104 (2.64) .097 (2.46) Dimensions shown in inches (mm) Specifications and dimensions subject to change F-22 www.ittcannon.com MIL-DTL-38999 Series I, II, III, IV Filter Connectors Table of Contents Contact Arrangements Engaging view, pin insert Series I, III & IV Series II No. of Contacs Service Ratings 11-5 10-5 5 #20 I 9-35 8-35 6 #22D M 15-5 14-5 5 #16 II Series I, III & IV Series II No. of Contacs Service Ratings 15-18 14-18 18 #20 I Series I, III & IV Series II No. of Contacs Service Ratings 19-32 18-32 32 #20 I Series I, III & IV Series II No. of Contacs Service Ratings 15-19 14-19 19 #20 I 15-35 14-35 37 #22D M 13-98 12-98 10 #20 I 13-8 12-8 8 #20 I 16-99 21 #20,2 #16 I 17-8 16-8 8 #16 II 21-16 20-16 16 #16 II 19-35 18-35 66 #22D M 23-21 22-21 21 #16 II Series I, III & IV Series II No. of Contacs Service Ratings 11-35 10-35 13 #22D M 11-98 10-98 6 #20 I 13-35 12-35 22 #22D M 21-41 20-41 41- #20 I 21-35 20-35 79 #22D M 23-53 22-53 53 #20 I 23-35 22-35 100 #22D M 25-29 24-29 29 #16 I 17-35 16-35 55 #22D M 17-26 16-26 26 #20 I 23-55 22-55 55 #20 I 25-35 24-35 128 #22D M 25-61 24-61 61 #20 I Please consult factory for availability of layouts not shown. Polarizing Positions Series IV MASTER KEY Front face of receptacle shown. Polarizing keys are external. Key Arrangements XX YY XX 110˚ 100˚ 90˚ 80˚ 70˚ YY 250˚ 260˚ 270˚ 280˚ 290˚ Filter N A B C D See page 24 for Series I, II and III polarization. F Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com F-23 MIL-DTL-38999 Series I Filter Connectors Filter Connectors Table of Contents Polarizing Positions Series I Angle of Rotation (Degrees) C D N B A 5º REF Front face of receptacle (plug opposite). Insert arrangement does not rotate with main key-keyway. The master key is rotated to provide shell polarization; the minor keys remain fixed. Shell Size Normal A B C D 9 11 13 15 17 19 21 23 25 95º 95º 95º 95º 95º 95º 95º 95º 95º 77º 81º 75º 74º 77º 77º 77º 80º 80º 67º 63º 61º 65º 65º 65º 69º 69º 123º 127º 129º 125º 125º 125º 121º 121º 113º 109º 115º 116º 113º 113º 113º 110º 110º Shell Size Normal Angle of Rotation (Degrees) Series II C D N B A 10º REF A C D 72º 68º 66º 70º 70º 70º 74º 74º 128º 132º 134º 130º 130º 130º 126º 126º 118º 114º 120º 121º 118º 118º 118º 115º 115º ARº or APº BSC BRº or BPº BSC Key Locations CRº or CPº BSC DRº or DPº BSC 105 102 80 35 64 91 95 113 90 53 119 51 80 135 49 66 62 79 80 135 49 66 62 79 140 132 118 140 155 131 141 156 145 156 146 141 142 170 169 140 145 153 142 170 169 140 145 153 215 248 230 205 234 197 208 182 195 220 176 184 196 200 200 200 180 197 196 200 200 200 180 197 265 320 312 275 304 240 236 292 252 255 298 242 293 310 244 257 280 272 293 310 244 257 280 272 8 10 12 14 16 18 20 22 24 100º 100º 100º 100º 100º 100º 100º 100º 100º 82º 86º 80º 79º 82º 82º 82º 85º 85º Shell Size Key & Keyway Arrangement identification Letter N A B C D E N A B C D E N A B C D E N A B C D E B Front face of receptacle (plug opposite). Insert arrangement does not rotate with main key-keyway. The master key is rotated to provide shell polarization; the minor keys remain fixed. Series III RECEPTACLE (Front face shown) MAIN KEYWAY AR˚ BSC 9 BR˚ BSC DR˚ BSC CR˚ BSC 11 13 and 15 PLUG (Front face shown) MAIN KEY AP˚ BSC Filter DP˚ BSC BP˚ BSC 17 and 19 CP˚ BSC NOTES 1. All Angles are BSC 2. The insert arrangement does not rotate with main key/keyway 3. All minor keys are rotated to provide shell polarization, the master key remains fixed at twelve o'clock position. 4. Polarization is different from Series I and II. 21 23 and 25 F Dimensions shown in inches (mm) Specifications and dimensions subject to change F-24 www.ittcannon.com MIL-DTL-38999 Series I Filter Connectors TKJL Table Cable of Contents Special In-line Filter Adapters Filter adapters are designed to be engaged between connectors in an existing circuit to provide instant filtering without having to rewire. They are environmentally sealed and have pin contacts in the plug end and socket contacts in the end that mates with the receptacle. The filter is concentric around the central pin-socket contact. Electrical and operating characteristics are the same as in the standard TKJ file connectors. These adapters will mate with all MIL-DTL-38999 connectors having like contact arrangements. For proper performance both the mating receptacle and panel must have a conductive finish. Please contact Customer Service for dimensions. Flange mounted in-line connectors, similar to MS27662, are also available. They are environmentally sealed and use the same filters as in regular TKJ receptacles. Design permits engaging cable plugs to both ends. Contact Customer Service for proper nomenclature and availability of the in-line cable adapters and in-line flange mounted TKJ connectors. Wall Mounting Receptacle TKJL0 J DIA. MAX. M 1.403 (35.64) MAX. L POLARIZING KEYWAY H T THREAD .926 (23.52) MAX. 1.930 (49.02) MAX. T THREAD N P DIA. D A A BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) .090 (2.29) MAX. 1.027 (26.09) MAX. Crimp Piggyback A Dia. Max. .573 (14.55) .701 (17.81) .851 (21.62) .976 (24.79) 1.101 (27.97) 1.208 (30.68) 1.333 (33.86) 1.458 (37.03) 1.583 (40.21) D Dia. Max. .299 (7.59) .427 (10.85) .541 (13.74) .666 (16.92) .791 (20.09) .888 (22.35) 1.005 (25.52) 1.130 (28.70) 1.255 (31.88) G Dia. Max. .562 (14.27) .626 (15.90) .751 (19.07) .876 (22.25) 1.001 (25.42) 1.063 (27.00) 1.188 (30.17) 1.313 (33.35) 1.438 (36.52) H Max. .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .130 (3.30) .130 (3.30) .130 (3.30) J Dia. Max. .662 (16.81) .810 (20.57) .960 (24.38) 1.085 (27.56) 1.210 (30.73) 1.317 (33.45) 1.442 (36.63) 1.567 (39.80) 1.692 (42.98) L Max. .632 (16.05) .632 (16.05) .632 (16.05) .632 (16.05) .632 (16.05) .632 (16.05) .602 (15.29) .602 (15.29) .602 (15.29) N T.P. .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) 1.500 (38.10) P Dia. Max. .138 (3.51) 138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .157 (3.99) .157 (3.99) T Thread .5625-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A F Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com M Max. .958 (24.33) 1.051 (26.70) 1.145 (29.08) 1.239 (31.47) 1.332 (33.83) 1.458 (37.03) 1.582 (40.18) 1.708 (43.38) 1.832 (46.53) Filter Shell Size 9 11 13 15 17 19 21 23 25 F-25 MIL-DTL-38999 Series I Filter Connectors TKJL TableReceptacle of Contents Wall Mounting (Back Panel) TKJL3 J DIA. MAX. M POLARIZING KEYWAY H 1.403 (35.64) MAX. L .926 (23.52) MAX. T THREAD P DIA. T THREAD A A N 1.930 (49.02) MAX. D .090 (2.29) MAX. 1.027 (26.09) MAX. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) Crimp Piggyback Box Mounting Receptacle (No Rear Threads) TKJL5 J DIA. MAX. M POLARIZING KEYWAY 9 11 13 15 17 19 21 23 25 .573 (14.55) .701 (17.81) .851 (21.62) .976 (24.79) 1.101 (27.97) 1.208 (30.68) 1.333 (33.86) 1.458 (37.03) 1.583 (40.21) D Dia. Max. .299 (7.59) .427 (10.85) .541 (13.74) .666 (16.92) .791 (20.09) .880 (22.35) 1.005 (25.52) 1.130 (28.70) 1.255 (31.88) G Dia. Max. .562 (14.27) .594 (15.08) .720 (18.28) .844 (21.43) .969 (24.61) 1.063 (27.00) 1.188 (30.17) 1.313 (33.35) 1.438 (36.52) 1.930 (49.02) MAX. A D .090 (2.29) MAX. 1.027 (26.09) MAX. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) G Crimp Piggyback H Max. J Dia. Max. L Max. M Max. N T.P. P Dia. Max. .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .130 (3.30) .130 (3.30) .130 (3.30) .662 (16.81) .810 (20.57) .960 (24.38) 1.085 (27.56) 1.210 (30.73) 1.317 (33.45) 1.442 (36.63) 1.567 (39.80) 1.692 (42.98) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .790 (20.07) .790 (20.07) .790 (20.07) .958 (24.33) 1.051 (26.70) 1.145 (29.08) 1.239 (31.47) 1.332 (33.83) 1.458 (37.03) 1.582 (40.18) 1.708 (43.38) 1.832 (46.53) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) 1.500 (38.10) .138 (3.51) 138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .157 (3.99) .157 (3.99) T Thread .5625-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A Filter A Dia. Max. .926 (23.52) MAX. A N P DIA. Shell Size H 1.403 (35.64) MAX. L F Dimensions shown in inches (mm) Specifications and dimensions subject to change F-26 www.ittcannon.com MIL-DTL-38999 Series I Filter Connectors TKJL Table ofReceptacle Contents Jam Nut .920 (23.37) MAX. TKJL7 R MAX. HEX POLARIZING KEYWAY J DIA. D A DIA. DIA. S .125 (3.18) MAX. .062 (1.57) MIN. PANEL THICKNESS H T THREAD BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) V THREAD .125 (3.18) MAX. .062 (1.57) MIN. PANEL THICKNESS H T THREAD .920 (23.37) MAX. D A DIA. DIA. W V THREAD 1.930 (49.02) MAX. .090 (2.29) MAX. Crimp Piggyback Shell Size 9 11 13 15 17 19 21 23 25 A Dia. Max. .573 (14.55) .701 (17.81) .851 (21.62) .976 (24.79) 1.101 (27.97) 1.208 (30.68) 1.333 (33.86) 1.458 (37.03) 1.583 (40.21) D Max. .655 (16.64) .755 (19.18) .942 (23.93) 1.066 (27.08) 1.191 (30.25) 1.316 (33.43) 1.441 (36.60) 1.566 (39.78) 1.691 (42.95) H Max. .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .151 (3.84) .151 (3.84) .151 (3.84) .151 (3.84) J Dia. Max. .662 (16.81) .810 (20.57) .960 (24.38) 1.085 (27.56) 1.210 (30.73) 1.317 (33.45) 1.442 (36.63) 1.567 (39.80) 1.692 (42.98) R Max. Hex. .892 (22.66) 1.017 (25.83) 1.205 (30.61) 1.329 (33.76) 1.455 (36.96) 1.579 (40.11) 1.705 (43.31) 1.829 (46.46) 20.17 (51.23) S Dia. Max. 1.204 (30.58) 1.391 (35.33) 1.516 (35.51) 1.641 (41.68) 1.766 (44.86) 1.954 (49.63) 2.078 (52.78) 2.204 (55.98) 2.328 (59.13) T Thread .5625-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A V Thread Class 2A 11/16-24UNEF 13/16-24UNEF 1-20UNEF 1-1/8-18UNEF 1-1/4-18UNEF 1-3/8-18UNEF 1-1/2-18UNEF 1-5/8-18UNEF 1-3/4-18UNS W Dia.Max. .299 (7.59) .427 (10.85) .541 (13.74) .666 (16.92) .791 (20.09) .880 (22.35) 1.005 (25.52) 1.130 (28.70) 1.255 (31.88) Filter F Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com F-27 MIL-DTL-38999 Series I Filter Connectors TKJL of Contents WallTable Mounting Receptacle TKJ0 POLARIZING KEYWAY 1.600 (40.64) MAX. 1.066 (27.08) MAX. .322 (8.17) MAX. T THREAD .322 (8.17) MAX. T THREAD J MAX. A DIA. M N P DIA. BLUE BAND (INDICTATES REAR RELEASE CONTACT RETENTION SYSTEM) A .069 (1.74) MAX. D .090 (2.29) MAX. .069 (1.74) MAX. Crimp Piggyback Wall Mounting Receptacle (Back Panel) TKJ3 .477 (11.35) MAX. P DIA. .322 (8.17) MAX. POLARIZING KEYWAY J DIA. M 1.066 (27.08) MAX. .477 (11.35) MAX. T THREAD A C DIA. DIA. N BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) 1.600 (40.64) MAX. .322 (8.17) MAX. C .069 (1.74) MAX. T THREAD A D .090 (2.29) MAX. .069 (1.74) MAX. Crimp Piggyback A Dia. Max. .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) C Dia. Max. .547 (13.89) .672 (17.06) .844 (21.43) .969 (24.61) 1.094 (27.78) 1.219 (30.96) 1.344 (34.13) 1.469 (37.31) 1.594 (40.48) D Dia. Max. .299 (7.59) .427 (10.85) .541 (13.74) .666 (16.92) .791 (20.09) .880 (22.35) 1.005 (25.52) 1.130 (28.70) 1.255 (31.88) G Dia. Max. .562 (14.27) .594 (15.08) .720 (13.28) .844 (21.43) .969 (24.61) 1.063 (27.00) 1.188 (30.17) 1.313 (33.35) 1.438 (36.52) J Dia. Max. .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) M Max. .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.91) 1.578 (39.08) 1.703 (43.26) P +.005 (0.13) N -.010 (0.25) T.P .594 (15.09) .125 (3.18) .719 (18.26) .125 (3.18) .812 (20.62) .125 (3.18) .906 (23.01) .125 (3.18) .969 (24.61) .125 (3.18) 1.062 (26.97) .125 (3.18) 1.156 (27.36) .125 (3.18) 1.250 (31.76) .125 (3.18) 1.375 (34.92) .152 (3.86) T Thread .5625-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A Filter Shell Size 8 10 12 14 16 18 20 22 24 F Dimensions shown in inches (mm) Specifications and dimensions subject to change F-28 www.ittcannon.com MIL-DTL-38999 Series II Filter Connectors TKJ Table of(Back Contents Box Mounting Receptacle Panel, No Rear Threads) TKJ5 P DIA. .447 (11.35) MAX. .447 (11.35) MAX. .322 (8.17) MAX. .322 (8.17) MAX. POLARIZING KEYWAY 1.600 (40.64) MAX. .090 (2.29) MAX. J DIA. M N C G DIA. A BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) C A D G DIA. .069 (1.74) MAX. .069 (1.74) MAX. Crimp Piggyback Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.42) 1.126 (28.60) 1.251 (31.77) 1.376 (34.95) 1.501 (38.13) C Dia. Max. .547 (13.89) .672 (17.06) .844 (21.43) .969 (24.61) 1.094 (27.78) 1.219 (30.96) 1.344 (34.13) 1.469 (37.31) 1.594 (40.48) D Dia. Max. .299 (7.59) .427 (10.85) .541 (13.74) .666 (16.92) .791 (20.09) .880 (22.35) 1.005 (25.52) 1.130 (28.70) 1.255 (31.88) G Dia. Max. .562 (14.27) .594 (15.08) .720 (13.28) .844 (21.43) .969 (24.61) 1.063 (27.00) 1.188 (30.17) 1.313 (33.35) 1.438 (36.52) M Max. .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.24) 1.328 (33.73) 1.453 (36.91) 1.578 (40.08) 1.703 (43.66) J Dia. Max. .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) P +.005 (0.13) -.010 (0.25) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) N T.P .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) Jam Nut Receptacle TKJ7 R P POLARIZING KEYWAY G 1.066 (27.08) MAX. P .062 (1.57) G T THREAD 1.600 (40.64) MAX. .062 (1.57) T THREAD J DIA. A D MOUNTING FLAT V THREAD S DIA. BLUE BAND (INDICATES REAR RELEASE COTACT RETENTION SYSTEM) .105 (2.66) MAX. A V THREAD W .105 (2.66) MAX. Crimp Piggyback C Dia. Max. .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (33.95) 1.501 (38.13) D Max. .818 (20.78) .942 (23.93) 1.066 (27.08) 1.191 (30.25) 1.321 (33.55) 1.441 (36.60) 1.566 (39.78) 1.691 (42.95) 1.816 (46.13) G Max. .145 (3.68) .145 (3.68) .145 (3.68) .145 (3.68) .145 (3.68) .145 (3.68) .171 (4.34) .171 (4.34) .171 (4.34) J Max. .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) P Max. .443 (11.25) .443 (11.25) .443 (11.25) .443 (11.25) .443 (11.25) .443 (11.25) .469 (11.91) .469 (11.91) .469 (11.91) R Max. Hex. 1.079 (27.41) 1.205 (30.61) 1.329 (33.76) 1.455 (36.96) 1.579 (40.11) 1.705 (43.31) 1.829 (46.46) 2.017 (51.23) 2.142 (54.41) T Thread .5625-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A V Thread 7/8-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-5/8-18UNEF-2A 1-3/4-18UNS-2A 1-7/8-18UNS-2A W Dia. Max. .299 (7.59) .427 (10.85) .541 (13.74) .666 (16.92) .791 (20.09) .880 (22.35) 1.005 (25.52) 1.130 (28.70) 1.255 (31.88) F Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com S Dia. Max. 1.381 (35.08) 1.506 (38.25) 1.631 (41.43) 1.756 (44.60) 1.944 (49.38) 2.022 (51.36) 2.147 (54.53) 2.271 (57.68) 2.396 (60.86) Filter Shell Size 8 10 12 14 16 18 20 22 24 F-29 MIL-DTL-38999 Series III Filter Connectors TKJA Table of Contents Wall Mounting Receptacle (No Rear Threads) TKJA0 1.960 (49.78) MAX 1.450 (36.83) MAX S R1 .098 (2.5) MAX .841 (21.36) MAX. B THREAD R2 P 4 PLACES V THREAD .098 (2.5) MAX .841 (21.36) MAX. B THREAD V THREAD BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) W PP 4 PLACES .230 MAX PANEL THICKNESS (including mounting hardware) .230 MAX PANEL THICKNESS (including mounting hardware) RED BAND (FULL MATED INDICATOR BAND) .520 (13.20) MAX .520 (13.20) MAX Crimp Piggyback P Dia. Max. Shell Shell size Size Code A B C D E F G H J 9 11 13 15 17 19 21 23 25 PP Max. R1 S Max. R2 W Max. BB Thread .01P-.03L-TS-2A .132 (3.25) .220 (5.59) .719 (18.26) .594 (15.09) .949 (24.1) .098 (2.50) .6250 (15.88) .132 (3.25) .198 (5.03) .812 (20.62) .719 (18.26) 1.043 (26.5) .098 (2.50) .7500 (19.05) .132 (3.25) .198 (5.03) .906 (23.01) .812 (20.62) 1.138 (28.9) .098 (2.50) .8750 (22.23) .132 (3.25) .198 (5.03) .969 (24.61) .906 (23.01) 1.232 (31.3) .098 (2.50) 1.000 (25.46) .132 (3.25) .198 (5.03) 1.062 (26.97) .969 (24.61) 1.323 (33.6) .098 (2.50) 1.1875 (30.16) .132 (3.25) .198 (5.03) 1.156 (29.36) 1.062 (26.97) 1.449 (36.8) .098 (2.50) 1.2500 (31.75) .132 (3.25) .198 (5.03) 1.250 (31.75) 1.156 (29.36) 1.575 (40.0) .126 (3.20) 1.375 (34.93) .158 (4.01) .246 (6.25) 1.375 (34.92) 1.250 (31.75) 1.701 (43.2) .126 (3.20) 1.5000 (38.10) .158 (4.01) .246 (6.25) 1.500 (38.10) 1.375 (34.92) 1.823 (46.3) .126 (3.20) 1.6250 (41.28) Jam Nut Receptacle (No Rear Threads) TKJA7 Z B THREAD A P W P BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) C FLAT 1.960 (49.78) MAX. .890 (22.6) MAX. M S S 1.450 (36.82) MAX. D V THREAD R THREAD .520 (13.2) MAX. .090 (2.29) MAX. .062 (1.57) MIN./.125 (3.18) MAX. PANEL THICKNESS RED BAND (FULLY MATED INDICATOR BAND) .520 (13.2) MAX. .062 (1.57) MIN./.125 (3.18) MAX. PANEL THICKNESS Crimp Piggyback Filter Shell Shell size Size Code 9 11 13 15 17 19 21 23 25 A B C D E F G H J A Dia. Max. G Thread 1.0-6g 0.100 R D Dia. Max. P Max. S Max. W Max. BB Thread .01P-.03L-TS-2A B Flat Max. C Max. 1.201 (30.5) .655 (16.63) .880 (22.31) .299 (7.59) M17 .571 (14.5) 1.079 (27.4) .114 (2.9) .6250 (15.88) 1.386 (35.2) .755 (19.17) .880 (22.31) .427 (10.85) M20 .571 (14.5) 1.268 (32.2) .114 (2.9) .7500 (19.05) 1.512 (38.4) .942 (23.92) .890 (22.6) .541 (13.74) M25 .579 (14.7) 1.390 (35.3) .114 (2.9) .8750 (22.23) 1.638 (41.6) 1.066 (27.07) .890 (22.6) .666 (16.92) M28 .579 (14.7) 1.516 (38.5) .114 (2.9) 1.000 (25.46) 1.764 (44.8) 1.191 (30.25) .890 (22.6) .791 (20.09) M32 .579 (14.7) 1.642 (41.7) .114 (2.9) 1.1875 (30.16) 1.949 (49.5) 1.316 (33.42) .890 (22.6) .880 (22.35) M35 .579 (14.7) 1.827 (46.4) .146 (3.7) 1.2500 (31.75) 2.075 (52.7) 1.441 (36.60) .890 (22.6) 1.005 (25.52) M38 .579 (14.7) 1.953 (49.6) .146 (3.7) 1.375 (34.93) 2.201 (55.9) 1.566 (39.77) .890 (22.6) 1.130 (28.70) M41 .579 (14.7) 2.079 (52.8) .146 (3.7) 1.5000 (38.10) 2.323 (59.0) 1.691 (42.95) .890 (22.6) 1.255 (31.88) M44 .579 (14.7) 2.205 (56.0) .146 (3.7) 1.6250 (41.28) F Dimensions shown in inches (mm) Specifications and dimensions subject to change F-30 www.ittcannon.com MIL-DTL-38999 Series IV Filter Connectors TKJB of Contents WallTable Mounting Receptacle TKJB0 .819 (20.8) .756 (19.2) E MAX 2 PLACES H MAX D DIA. 4 PLACES .035 (.9) .008 (.2) B DIA. A DIA. 1.403 (35.636) MAX F 2 PLACES .819 (20.8) .756 (19.2) C THREAD H MAX .035 (.9) .008 (.2) C THREAD B DIA. A DIA. G DIA. 1.403 (35.636) MAX .090 (2.286) MAX Crimp Piggyback Shell Shell size Size Code 11 13 15 17 19 21 23 25 B C D E F G H J A Dia. Max. B Dia. Max. C* Thread 1.0-6g 0.100 R D ± .008 (.20) Dia. E Dia. Max. F Basic G Dia. Max. H Max .509 (12.93) .793 (20.15) M15 .130 (3.3) 1.051 (26.7) .812 (20.62) .427 (10.85) .102 (2.590) .634 (16.10) .919 (23.35) M18 .130 (3.3) 1.146 (29.1) .906 (23.02) .541 (13.74) .102 (2.590) .759 (19.28) 1.044 (26.52) M22 .130 (3.3) 1.240 (31.5) .969 (24.62) .666 (16.92) .102 (2.590) .885 (22.48) 1.170 (29.72) M25 .130 (3.3) 1.335 (33.9) 1.062 (26.98) .791 (20.09) .102 (2.590) 1.009 (25.63) 1.294 (32.87) M28 .130 (3.3) 1.461 (37.1) 1.156 (29.36) .880 (22.35) .102 (2.590) 1.134 (28.80) 1.419 (36.05) M31 .130 (3.3) 1.583 (40.2) 1.250 (31.76) 1.005 (25.52) .134 (3.403) 1.259 (31.98) 1.544 (39.22) M34 .150 (3.8) 1.709 (43.4) 1.375 (34.92) 1.130 (28.70) .134 (3.403) 1.384 (25.15) 1.669 (42.40) M37 .150 (3.8) 1.835 (46.6) 1.500 (38.10) 1.255 (31.880) .134 (3.403) Filter F Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com F-31 MIL-DTL-38999 Series IV Filter Connectors TKJB Table ofReceptacle Contents Jam Nut TKJB7 D THREAD B MTG FLAT A DIA. E DIA. MAX 1.118 (28.4) 1.082 (27.5) C THREAD .106 (2.7) .075 (1.9) 1.403 (35.636) MAX D THREAD B MTG FLAT A DIA. F DIA. 1.118 (28.4) 1.082 (27.5) C THREAD .106 (2.7) .075 (1.9) .090 (2.286) MAX 1.960 (49.636) MAX Crimp Piggyback Shell Shell size Size Code B C D E F G H J B Mtg. Flat (Max.) C* Thread 1.0-6g 0.100 R D Thread 1.0-6g 0.100 R E Dia. Max. F Dia. Max. .509 (12.93) .942 (23.93) 25 15 1.520 (38.6) .427 (10.85) .634 (16.10) 1.066 (27.08) 28 18 1.642 (41.7) .541 (13.74) .759 (19.28) 1.191 (30.26) 31 22 1.768 (44.9) .666 (16.92) .885 (22.48) 1.321 (33.56) 34 25 1.957 (49.7) .791 (20.09) 1.009 (25.63) 1.441 (36.61) 38 28 2.035 (51.7) .880 (22.35) 1.134 (28.80) 1.566 (39.78) 41 31 2.157 (54.8) 1.005 (25.52) 1.259 (31.98) 1.691 (42.96) 44 34 2.283 (58.0) 1.130 (28.70) 1.384 (25.15) 1.816 (46.13) 47 37 2.409 (61.2) 1.255 (31.880) Filter 11 13 15 17 19 21 23 25 A Dia. Max. F Dimensions shown in inches (mm) Specifications and dimensions subject to change F-32 www.ittcannon.com