HD74LVC240A Octal Buffers / Line Drivers with 3-state Outputs REJ03D0351–0400Z (Previous ADE-205-109B (Z)) Rev.4.00 Jul. 26, 2004 Description The HD74LVC240A has eight inverter drivers with three state outputs in a 20 pin package. This device is an inverting buffer and has two active low enables (1G and 2G). Each enable independently controls four buffers. Low voltage and high-speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • • • • • • • VCC = 2.0 V to 5.5 V All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VOUT (Max.) = 5.5 V (@VCC = 0 V or output off state) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±24 mA (@VCC = 3.0 V to 5.5 V) Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) HD74LVC240AFPEL SOP–20 pin (JEITA) FP–20DAV FP EL (2,000 pcs/reel) HD74LVC240ATELL TSSOP–20 pin TTP–20DAV T ELL (2,000 pcs/reel) Note: Please consult the sales office for the above package availability. Function Table Inputs G A Output Y H L L X H L Z L H H: L: X: Z: High level Low level Immaterial High impedance Rev.4.00 Jul. 26, 2004 page 1 of 6 HD74LVC240A Pin Arrangement 1G 1 20 VCC 1A1 2 19 2G 2Y4 3 18 1Y1 1A2 4 17 2A4 2Y3 5 16 1Y2 1A3 6 15 2A3 2Y2 7 14 1Y3 1A4 8 13 2A2 2Y1 9 12 1Y4 GND 10 11 2A1 (Top view) Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage Input diode current Input voltage Output diode current VCC IIK VI IOK V mA V mA Output voltage VO Output current VCC, GND current / pin Storage temperature IO ICC or IGND Tstg –0.5 to 6.0 –50 –0.5 to 6.0 –50 50 –0.5 to VCC +0.5 –0.5 to 6.0 ±50 100 –65 to +150 V Conditions VI = –0.5 V VO = –0.5 V VO = VCC +0.5 V Output "H" or "L" Output "Z" or VCC:OFF mA mA °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Rev.4.00 Jul. 26, 2004 page 2 of 6 HD74LVC240A Recommended Operating Conditions Item Symbol Ratings Unit Conditions Supply voltage VCC 1.5 to 5.5 V Data hold V V At operation G, A Output "H" or "L" Output "Z" or VCC:OFF Input / output voltage VI VO Operating temperature Output current Ta IOH IOL Input rise / fall time *1 tr, tf 2.0 to 5.5 0 to 5.5 0 to VCC 0 to 5.5 –40 to 85 –12 –24*2 12 24*2 10 °C mA mA VCC = 2.7 V VCC = 3.0 V to 5.5 V VCC = 2.7 V VCC = 3.0 V to 5.5 V ns/V Notes: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. 2. Duty cycle ≤ 50% Electrical Characteristics Ta = –40 to 85°C Item Symbol VCC (V) Min Max Unit Input voltage VIH 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 2.7 to 5.5 2.7 3.0 3.0 4.5 2.7 to 5.5 2.7 3.0 4.5 0 to 5.5 2.7 to 5.5 2.0 VCC×0.7 — — VCC –0.2 2.2 2.4 2.2 3.8 — — — — — — — — 0.8 VCC×0.3 — — — — — 0.2 0.4 0.55 0.55 ±5.0 ±5.0 V 0 2.7 to 3.6 2.7 to 5.5 3.0 to 3.6 — — — — 20 ±10 10 500 VIL Output voltage VOH VOL Input current Off state output current IIN IOZ Output leak current Quiescent supply current IOFF ICC ∆ICC Rev.4.00 Jul. 26, 2004 page 3 of 6 Test Conditions V V IOH = –100 µA IOH = –12 mA IOH = –24 mA V IOL = 100 µA IOL = 12 mA IOL = 24 mA µA µA VIN = 5.5 VCC or GND VIN = VCC, GND VOUT = 5.5 V or GND µA µA VIN / VOUT = 5.5 V VIN / VOUT = 3.6 to 5.5 V VIN = VCC or GND VIN = one input at (VCC –0.6)V, other inputs at VCC or GND µA HD74LVC240A Switching Characteristics Item Symbol VCC (V) Min Ta = –40 to 85°C Typ Max Unit From (Input) To (Output) Propagation delay time tPLH tPHL ns G Y tHZ tLZ 7.5 6.5 5.0 9.0 8.0 6.5 8.0 7.0 6.0 — 1.0 1.0 — — Y Output disable time — — — — — — — — — — — — 3.0 15.0 A tZH tZL — 1.5 — — 1.5 — — 1.5 — — — — — — ns Output enable time 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 3.3±0.3 5.0±0.5 2.7 2.7 ns G Y Between output pins skew tOSLH *1 tOSHL Input capacitance Output capacitance Note: CIN CO ns pF pF 1. This parameter is characterized but not tested. tosLH = | tPLHm - tPLHn|, tosHL = | tPHLm - tPHLn| Test Circuit VCC VCC Input Pulse generator Zout = 50 Ω See Function Table 1G, 2G Output 500 Ω S1 1Y1 to 2Y4 CL = 50 pF 1A1 to 2A4 450 Ω 50 Ω Scope Symbol t PLH / t PHL t ZH/ t HZ t ZL / t LZ Note: 1. CL includes probe and jig capacitance. Rev.4.00 Jul. 26, 2004 page 4 of 6 OPEN See under table GND *1 S1 Vcc=2.7V, 3.3±0.3V Vcc=5.0±0.5V OPEN GND OPEN GND 6V 2×Vcc HD74LVC240A Waveforms – 1 tf 90 % Vref Input A tr VIH 90 % 10 % 10 % GND t PHL t PLH VOH Output Y Vref Vref VOL Notes: 1. tr = 2.5 ns, tf = 2.5 ns 2. Input waveform : PRR = 10 MHz, duty cycle 50% Waveforms – 2 tf Input G tr 90 % Vref 10 % VIH 90 % Vref 10 % t LZ t ZL GND ≈V OH1 Vref Waveform - A t ZH Waveform - B VOL + 0.3 V t HZ VOH – 0.3 V Vref VOL VOH ≈V OL1 TEST VIH Vref VOH1 VOL1 Notes: Vcc=2.7V, 3.3±0.3V Vcc=5.0±0.5V 2.7 V Vcc 1.5 V 3V 50%Vcc GND GND Vcc 1. tr = 2.5 ns, tf = 2.5 ns 2. Input waveform : PRR = 10 MHz, duty cycle 50% 3. Waveform – A shows input conditions such that the output is "L" level when enable by the output control. 4. Waveform – B shows input conditions such that the output is "H" level when enable by the output control. Rev.4.00 Jul. 26, 2004 page 5 of 6 HD74LVC240A Package Dimensions As of January, 2002 Unit: mm 12.6 13 Max 11 1 10 5.5 20 *0.20 ± 0.05 2.20 Max 1.15 0˚ – 8˚ 0.10 ± 0.10 0.80 Max 0.20 7.80 +– 0.30 1.27 *0.40 ± 0.06 0.70 ± 0.20 0.15 0.12 M Package Code JEDEC JEITA Mass (reference value) *Pd plating FP–20DAV — Conforms 0.31 g As of January, 2002 Unit: mm 6.50 6.80 Max 11 1 10 4.40 20 0.65 *0.20 ± 0.05 1.0 0.13 M 6.40 ± 0.20 *Pd plating Rev.4.00 Jul. 26, 2004 page 6 of 6 0.07 +0.03 –0.04 0.10 *0.15 ± 0.05 1.10 Max 0.65 Max 0˚ – 8˚ 0.50 ± 0.10 Package Code JEDEC JEITA Mass (reference value) TTP–20DAV — — 0.07 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0