RENESAS HD74BC373A

HD74BC373A
Octal D Type Transparent Latches With 3 State Outputs
REJ03D0283–0300Z
(Previous ADE-205-009A (Z))
Rev.3.00
Jul.16.2004
Description
The HD74BC373A provides high drivability and operation equal to or better than high speed bipolar standard logic IC
by using Bi-CMOS process. The device features low power dissipation that is about 1/5 of high speed bipolar logic IC,
when the frequency is 10 MHz. The device has eight D type latches with three state outputs in a 20 pin package. When
the latch enable input is high, the Q outputs will follow the D inputs. When the latch enable goes low, data at the D
inputs will be retained at the outputs until latch enable returns high again. When a high logic level is applied to the
output control input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs
and the state of the storage elements.
Features
• Input/Output are at high impedance state when power supply is off.
• Built in input pull up circuit can make input pins be open, when not used.
• TTL level input
• Wide operating temperature range input pins
Ta = –40 to + 85°C
• Ordering Information
Part Name
Package Type
Package Code
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74BC373AFPEL
SOP-20 pin (JEITA) FP-20DAV
FP
EL (2,000 pcs/reel)
HD74BC373ATELL
TSSOP-20 pin
T
ELL (2,000 pcs/reel)
TTP-20DAV
Note: Please consults the sales office for the above package availability.
Function Table
Inputs
LE
G
D
Output Q
H
L
X
H
X
L
Z
L
L
L
H
L
H
X
H
No change
H
L
X
Z
:
:
:
:
High level
Low level
Immaterial
High impedance
Rev.3.00, Jul.16.2004, page 1 of 8
HD74BC373A
Pin Arrangement
G
1
20
VCC
1Q
2
19
8Q
1D
3
18
8D
2D
4
17
7D
2Q
5
16
7Q
3Q
6
15
6Q
3D
7
14
6D
4D
8
13
5D
4Q
9
12
5Q
GND
10
11
LE
(Top view)
Absolute Maximum Ratings
Item
Supply voltage
Input diode current
Input voltage
Output voltage
Off state output voltage
Symbol
VCC
Rating
–0.5 to +7.0
Unit
V
IIK
VIN
±30
–0.5 to +7.5
mA
V
VOUT
VOUT(off)
–0.5 to +7.5
–0.5 to +5.5
V
V
Storage temperature
Tstg
–65 to +150
°C
Note: 1. The absolute maximum ratings are values which must not individually be exceeded, and furthermore, no two
of which may be realized at the same time.
Recommended Operating Conditions
Item
Supply voltage
VCC
4.5
5.0
5.5
V
Input voltage
Output voltage
VIN
VOUT
0
0
—
—
VCC
VCC
V
V
Operating temperature
Input rise/fall time*1
Topr
tr, tf
–40
0
—
—
85
8
°C
ns/V
Note:
Symbol
Min
Typ
1. This item guarantees maximum limit when one input switches.
Waveform: Refer to test circuit of switching characteristics.
Rev.3.00, Jul.16.2004, page 2 of 8
Max
Unit
HD74BC373A
Logic Diagram
G
1D
D Q
1Q
2D
D Q
2Q
7D
D Q
7Q
8D
D Q
8Q
LE
Rev.3.00, Jul.16.2004, page 3 of 8
HD74BC373A
Electrical Characteristics (Ta = –40°C to +85°C)
Item
Symbol
Input voltage
VIH
VIL
Output voltage
VOH
Input diode voltage
Input current
VCC(V)
Min
Max
Unit
Test Conditions
2.0
—
—
0.8
V
V
4.5
4.5
2.4
2.0
—
—
V
V
IOH = –3 mA
IOH = –15 mA
VOL
4.5
4.5
—
—
0.4
0.5
V
V
IOL = 24 mA
IOL = 48 mA
VIK
II
4.5
5.5
—
—
–1.2
–250
V
µA
IIN = –18 mA
VIN = 0 V
5.5
5.5
—
—
1.0
100
µA
µA
VIN = 5.5 V
VIN = 7.0 V
Short circuit output current*1
Off state output current
IOS
IOZH
5.5
5.5
–100
—
–225
50
mA
µA
VIN = 0 or 5.5 V
VO = 2.7 V
Supply current
IOZL
ICCL
5.5
5.5
—
—
–50
29.5
µA
mA
VO = 0.5 V
VIN = 0 or 5.5 V
All outputs is “L”
ICCH
5.5
—
2.5
mA
ICCZ
5.5
—
2.5
mA
VIN = 0 or 5.5 V
All outputs is “H”
VIN = 0 or 5.5 V
All outputs is “Z”
ICCT*2
5.5
—
1.5
mA
VIN = 3.4 or 0.5 V
Notes : 1. Not more than one output should be shorted at a time and duration of the short circuit should not exceed one
second.
2. When input by the TTL level, it shows ICC increase at per one input pin.
Switching Test Method (CL = 50 pF)
Ta = 25°C
VCC = 5.0 V
Ta = –40 to 85°C
VCC = 5.0 V ±10%
Item
Propagation
D→Q
Symbol
Min
tPLH
3.0
Max
8.0
Min
3.0
Max
10.0
Unit
Test Conditions
ns
See under figure
delay time
tPHL
tPLH
3.0
3.0
8.0
8.0
3.0
3.0
10.0
10.0
ns
Output enable time
tPHL
tZH
3.0
3.0
8.0
9.0
3.0
3.0
10.0
11.0
ns
Output disable time
tZL
tHZ
3.0
3.0
9.0
8.0
3.0
3.0
11.0
10.0
ns
Setup time
tLZ
tS(H)
3.0
2.0
8.0
—
3.0
2.0
10.0
—
ns
Hold time
tS(L)
th(H)
2.0
2.0
—
—
2.0
2.0
—
—
ns
Pulse width
th(L)
tw
2.0
6.0
—
—
2.0
6.0
—
—
Input capacitanse
Output capacitance
CIN
CO
3.0(Typ)
15.0(Typ)
LE → Q
Rev.3.00, Jul.16.2004, page 4 of 8
—
—
ns
pF
pF
VIN = VCC or GND
VO = VCC or GND
HD74BC373A
Test Circuit
Input
Pulse Generator
Zout = 50 Ω
Input
Pulse Generator
Zout = 50 Ω
Notes:
VCC
See Function Table
VCC
G
Output
1D to 8D
1Q to 8Q
LE
1. CL includes probe and jig capacitance.
2. Open: tPLH, tPHL, tZH, tHZ, th, tSU, tw
7 V: tZL, tLZ
Rev.3.00, Jul.16.2004, page 5 of 8
500 Ω
CL =
50 pF
450 Ω
50 Ω Scope
*2
OPEN
7V
HD74BC373A
Waveforms-1
tr
tf
90%
1.5 V
Input
LE
3V
90%
1.5 V
10%
10%
tr
3V
90%
90%
Input
D
0V
tf
10%
10%
t PLH
0V
t PHL
VOH
1.5 V
Output
Q
1.5 V
VOL
Waveforms-2
tr
3V
90%
Input
LE
10%
0V
tr
tf
90%
Input
D
3V
90%
1.5 V
1.5 V
10%
10%
t PLH
t PHL
0V
VOH
Output
Q
Rev.3.00, Jul.16.2004, page 6 of 8
1.5 V
1.5 V
VOL
HD74BC373A
Waveforms-3
tr
Input
LE
tf
90%
1.5 V
10%
3V
90%
1.5 V
tw
10%
0V
th
ts
3V
Input
D
Notes:
1.5 V
1.5 V
0V
1. tr = 2.5 ns, tf = 2.5 ns
2. Input waveform: PRR =1 MHz, duty cycle 50%
Waveforms-4
tf
Input G
tr
90%
1.5 V
90%
1.5 V
10%
10%
3V
0V
t ZL
t LZ
3.5 V
1.5 V
Waveform–A
VOL + 0.3 V
t ZH
Waveform–B
VOL
t HZ
VOH – 0.3 V
VOH
1.5 V
0V
Notes:
1. tr = 2.5 ns, tf = 2.5 ns
2. Input waveform: PRR = 1 MHz, duty cycle 50%
3. Waveform-A shows input conditions such that the output is “L” level when enable by the
output control.
4. Waveform-B shows input conditions such that the output is “H” level when enable by the
output control.
Rev.3.00, Jul.16.2004, page 7 of 8
HD74BC373A
Package Dimensions
As of January, 2003
Unit: mm
12.6
13 Max
11
1
10
5.5
20
*0.20 ± 0.05
2.20 Max
1.15
0˚ – 8 ˚
0.10 ± 0.10
0.80 Max
0.20
7.80 +– 0.30
1.27
*0.40 ± 0.06
0.70 ± 0.20
0.15
0.12 M
Package Code
JEDEC
JEITA
Mass (reference value)
*Ni/Pd/Au plating
FP-20DAV
—
Conforms
0.31 g
As of January, 2003
Unit: mm
6.50
6.80 Max
11
1
10
4.40
20
0.65
*0.20 ± 0.05
1.0
0.13 M
6.40 ± 0.20
*Ni/Pd/Au plating
Rev.3.00, Jul.16.2004, page 8 of 8
0.07 +0.03
–0.04
0.10
*0.15 ± 0.05
1.10 Max
0.65 Max
0˚ – 8˚
0.50 ± 0.10
Package Code
JEDEC
JEITA
Mass (reference value)
TTP-20DAV
—
—
0.07 g
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2004. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .1.0