2.0x1.25mm SMD CHIP LED LAMP Part Number: AP2012YC Yellow Features Description z 2.0mmx1.25mm SMT LED,1.1mm thickness. The Yellow source color devices are made with Gallium z Low power consumption. Arsenide Phosphide on Gallium Phosphide Yellow Light z Wide viewing angle. Emitting Diode. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA4051 REV NO: V.8 DATE: JUN/08/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu PAGE: 1 OF 5 ERP: 1203000213 Selection Guide Part No. Dice AP2012YC Iv (mcd) [2] @ 20mA Lens Type Yellow (GaAsP/GaP) Viewing Angle [1] Min. Typ. 2θ1/2 5 8 120° Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA4051 REV NO: V.8 DATE: JUN/08/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu PAGE: 2 OF 5 ERP: 1203000213 Yellow AP2012YC SPEC NO: DSAA4051 REV NO: V.8 DATE: JUN/08/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu PAGE: 3 OF 5 ERP: 1203000213 AP2012YC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAA4051 REV NO: V.8 DATE: JUN/08/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu PAGE: 4 OF 5 ERP: 1203000213 PACKING & LABEL SPECIFICATIONS AP2012YC SPEC NO: DSAA4051 REV NO: V.8 DATE: JUN/08/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu PAGE: 5 OF 5 ERP: 1203000213