3.2X1.6mm SMD CHIP LED LAMP Part Number: APC3216SYCK SUPER BRIGHT YELLOW Description Features z3.2X1.6mm SMT LED, 1.1mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL (on GaAs substrate) light emitting diode chip. FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS / REEL . zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS The Super Bright Yellow device is made with DH InGaAlP COMPLIANT. Package Dimensions Notes: 1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1003 REV NO: V.3 DATE: APR/18/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203001005 Selection Guide Dice Part No. APC3216SYCK Iv (mcd) [2] @ 20mA Lens Type SUPER BRIGHT YELLOW (InGaAIP) WATER CLEAR Viewing Angle[1] Min. Typ. 2θ1/2 36 120 120° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity/ Luminous Flux: +/-15% Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD[1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF[2] Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1003 REV NO: V.3 DATE: APR/18/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203001005 Super Bright Yellow APC3216SYCK SPEC NO: DSAD1003 REV NO: V.3 DATE: APR/18/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203001005 APC3216SYCK Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1003 REV NO: V.3 DATE: APR/18/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203001005 PACKING & LABEL SPECIFICATIONS APC3216SYCK SPEC NO: DSAD1003 REV NO: V.3 DATE: APR/18/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203001005