3.81mmx19.05mm LED LIGHT BAR Part Number: KB2635EW High Efficiency Red Features Description z UNIFORM LIGHT EMITTING AREA. The High Efficiency Red source color devices are made with z LOW CURRENT OPERATION. Gallium Arsenide Phosphide on Gallium Phosphide Orange z EASILY MOUNTED ON P.C. BOARDS. Light Emitting Diode. z FLUSH MOUNTABLE. z EXCELLENT ON/OFF CONTRAST. z CAN BE USED WITH PANELS AND LEGEND MOUNTS. z CATEGORIZED FOR LUMINOUS INTENSITY, YELLOW AND GREEN CATEGORIZED FOR COLOR. z RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram 1. Al dimensions are in milimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice SPEC NO: DSAD1462 REV NO: V.5 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1334000129 Selection Guide Part No. Dice KB2635EW Iv (mcd) [1] @ 20mA Lens Type High Efficiency Red (GaAsP/GaP) WHITE DIFFUSED Min. Typ. 10 60 Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD1462 REV NO: V.5 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1334000129 High Efficiency Red KB2635EW SPEC NO: DSAD1462 REV NO: V.5 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1334000129 PACKING & LABEL SPECIFICATIONS KB2635EW SPEC NO: DSAD1462 REV NO: V.5 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1334000129