3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APA3010EC Features High Efficiency Red Description 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm THICKNESS. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange LOW POWER CONSUMPTION. Light Emitting Diode. WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1035 REV NO: V.9 DATE: JUN/01/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000559 Selection Guide Part No. Dice APA3010EC Lens Type High Efficiency Red (GaAsP/GaP) Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2<1/2 4 15 120° WATER CLEAR Notes: 1. >1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Cpeak Peak Wavelength High Efficiency Red CD [1] Dominant Wavelength IC1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1035 REV NO: V.9 DATE: JUN/01/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000559 High Efficiency Red APA3010EC SPEC NO: DSAD1035 REV NO: V.9 DATE: JUN/01/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000559 APA3010EC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1035 REV NO: V.9 DATE: JUN/01/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000559 PACKING & LABEL SPECIFICATIONS APA3010EC SPEC NO: DSAD1035 REV NO: V.9 DATE: JUN/01/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000559