2.1x0.6mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APA2106EC Features Description z2.1mmX0.6mm zLOW RIGHT ANGLE SMT LED, 1.0mm THICKNESS. POWER CONSUMPTION. VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. Phosphide Orange Light Emitting Diode. COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium zWIDE zVARIOUS HIGH EFFICIENCY RED COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1014 REV NO: V.7 DATE: DEC/19/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000490 Selection Guide Dice Part No. APA2106EC Iv (mcd) [2] @ 20mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 4 15 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1014 REV NO: V.7 DATE: DEC/19/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000490 High Efficiency Red APA2106EC SPEC NO: DSAD1014 REV NO: V.7 DATE: DEC/19/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000490 APA2106EC Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1014 REV NO: V.7 DATE: DEC/19/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000490 PACKING & LABEL SPECIFICATIONS APA2106EC SPEC NO: DSAD1014 REV NO: V.7 DATE: DEC/19/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1203000490