3.0x2.0mm SURFACE MOUNT LED LAMP Part Number: AA3020AEC High Efficiency Red Features Description z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM The High Efficiency Red source color devices are made with SPACE REQUIRED. Gallium Arsenide Phosphide on Gallium Phosphide Orange z SUITABLE FOR COMPACT OPTOELECTRONIC Light Emitting Diode. APPLICATIONS. z LOW POWER CONSUMPTION. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4209 REV NO: V.3 DATE: JUN/27/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201002951 Selection Guide Part No. Dice AA3020AEC Lens Type High Efficiency Red (GaAsP/GaP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 7 20 90° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH4209 REV NO: V.3 DATE: JUN/27/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201002951 High Efficiency Red AA3020AEC SPEC NO: DSAH4209 REV NO: V.3 DATE: JUN/27/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201002951 AA3020AEC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH4209 REV NO: V.3 DATE: JUN/27/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201002951 PACKING & LABEL SPECIFICATIONS AA3020AEC SPEC NO: DSAH4209 REV NO: V.3 DATE: JUN/27/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201002951