1.6X0.8mm SMD CHIP LED LAMP Part Number: AP1608EC High Efficiency Red Features Description z 1.6mmX0.8mm SMT LED, 1.1mm thickness. The High Efficiency Red source color devices are made with z Low power consumption. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Wide viewing angle. Light Emitting Diode. z Ideal for backlight and indicator. z Various colors and lens types available. z Package: 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD0915 REV NO: V.9 DATE: JUN/07/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 1 OF 5 ERP: 1203000003 Selection Guide Part No. Dice AP1608EC Lens Type High Efficiency Red (GaAsP/GaP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 8 15 120° Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD0915 REV NO: V.9 DATE: JUN/07/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 2 OF 5 ERP: 1203000003 High Efficiency Red AP1608EC SPEC NO: DSAD0915 REV NO: V.9 DATE: JUN/07/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 3 OF 5 ERP: 1203000003 AP1608EC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAD0915 REV NO: V.9 DATE: JUN/07/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 4 OF 5 ERP: 1203000003 PACKING & LABEL SPECIFICATIONS AP1608EC SPEC NO: DSAD0915 REV NO: V.9 DATE: JUN/07/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu PAGE: 5 OF 5 ERP: 1203000003