57mm (2.3INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SA23-12GWA Green Features Description z 2.3 inch digit height. The Green source color devices are made with Gallium z Low current operation. Phosphide Green Light Emitting Diode. z Excellent character appearance. z High light output. z Easy mounting on P.C. boards or sockets. z Multicolor available. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241 Selection Guide Part No. Dice Lens Type Green (GaP) SA23-12GWA Iv (ucd) [1] @ 10mA White Diffused Min. Typ. 31000 65000 *9000 *20000 Description Common Anode, Rt. Hand Decimal Notes: 1. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage (DP) Green 8.8 (4.4) 10.0 (5.0) V IF=20mA IR Reverse Current (Per Chip) Green 10 (10) uA VR=5V (VR=5V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation (DP) 250 (125) mW DC Forward Current (DP) 25 (25) mA Peak Forward Current [1] (DP) 140 (140) mA 5 (5) V Reverse Voltage (Per Chip) Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241 Green SA23-12GWA SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241 SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241 PACKING & LABEL SPECIFICATIONS SA23-12GWA SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241 SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAN0652 REV NO: V.1A DATE: JUN/24/2013 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301000241