3.2x2.4mm SMD CHIP LED LAMP Part Number: APD3224QWF/F White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2x2.4mm SMT LED, 2.4mm thickness. The source color devices are made with InGaN Light Emit- z Low power consumption. ting Diode. z Ideal for backlight and indicator. Static electricity and surge damage the LEDS. z Various colors and lens types available. It is recommended to use a wrist band or anti-electrostatic z Package : 1500pcs / reel. glove when handling the LEDs. z Moisture sensitivity level : level 3. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK0079 REV NO: V.2 DATE: AUG/19/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203012927 Selection Guide Part No. Dice APD3224QWF/F White (InGaN) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 2θ1/2 280 420 175° Yellow Fluorescent Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter VF [1] Forward Voltage White IR Reverse Current White Chromaticity Coordinates White Capacitance White x [2] y [2] C Device Typ. Max. Units Test Conditions 3.3 4 V IF=20mA 50 uA VR = 5V pF VF=0V;f=1MHz 0.31 0.31 100 Notes: 1. Forward Voltage: +/-0.1V. 2. Measurement Tolerance Of the Chromaticity Coordinates Is ±0.02. Absolute Maximum Ratings at TA=25°C Parameter White Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK0079 REV NO: V.2 DATE: AUG/19/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203012927 White APD3224QWF/F SPEC NO: DSAK0079 REV NO: V.2 DATE: AUG/19/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203012927 APD3224QWF/F White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x a2 b1 x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 a0 c0 b2 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.02. SPEC NO: DSAK0079 REV NO: V.2 DATE: AUG/19/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203012927 APD3224QWF/F Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK0079 REV NO: V.2 DATE: AUG/19/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203012927 PACKING & LABEL SPECIFICATIONS APD3224QWF/F SPEC NO: DSAK0079 REV NO: V.2 DATE: AUG/19/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203012927