5.0X6.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA5060PBC/J BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features SINGLE COLOR. The Blue source color devices are made with InGaN on SiC SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER Light Emitting Diode. PROCESS. Static electricity and surge damage the LEDS. AVAILABLE ON TAPE AND REEL. It is recommended to use a wrist band or anti-electrostatic IDEAL FOR BACKLIGHTING. glove when handling the LEDs. PACKAGE : 500PCS / REEL. All devices, equipment and machinery must be electrically MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF8197 REV NO: V.3 DATE:JUN/19/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1201001594 Selection Guide Dice Part No. AA5060PBC/J Iv (mcd) [2] @ 30mA Lens Type BLUE (InGaN) WATER CLEAR Viewing Angle[1] Min. Typ. 2θ1/2 180 450 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength ∆λ1/2 Typ. Units Test Conditions 467 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 22 nm IF=20mA C Capacitance Blue 110 VF [2] Forward Voltage Blue 3.2 IR Reverse Current Blue Max. pF VF=0V;f=1MHz 4.0 V IF=20mA 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF8197 REV NO: V.3 DATE:JUN/19/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1201001594 Blue AA5060PBC/J SPEC NO: DSAF8197 REV NO: V.3 DATE:JUN/19/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1201001594 AA5060PBC/J Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF8197 REV NO: V.3 DATE:JUN/19/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1201001594 PACKING & LABEL SPECIFICATIONS AA5060PBC/J SPEC NO: DSAF8197 REV NO: V.3 DATE:JUN/19/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1201001594