3.5x2.8 mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number : AA3528VGC/Z GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description ●SINGLE COLOR. The Green source color devices are made with InGaN Light ● SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER Emitting Diode. Static electricity and surge damage the LEDS. PROCESS. ● AVAILABLE ON TAPE AND REEL. It is recommended to use a wrist band or anti-electrostatic ● IDEAL FOR BACKLIGHTING. glove when handling the LEDs. ●PACKAGE : 1500PCS / REEL. All devices, equipment and machinery must be electrically ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. ●RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAH0311 REV NO: V.1 DATE: DEC/04/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1201002601 Selection Guide Dice Part No. AA3528VGC/Z Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaN ) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 480 800 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 525 nm IF=20mA Green 535 nm IF=20mA Spectral Line Half-width Green 39 nm IF=20mA C Capacitance Green 65 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 3.8 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH0311 REV NO: V.1 DATE: DEC/04/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1201002601 Green AA3528VGC/Z SPEC NO: DSAH0311 REV NO: V.1 DATE: DEC/04/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1201002601 AA3528VGC/Z Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH0311 REV NO: V.1 DATE: DEC/04/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1201002601 PACKING & LABEL SPECIFICATIONS AA3528VGC/Z SPEC NO: DSAH0311 REV NO: V.1 DATE: DEC/04/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG ERP: 1201002601