3.5 x2.8mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APED3528PBC/A BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description SINGLE COLOR. The Blue source color devices are made with InGaN on SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER SiC Light Emitting Diode. PROCESS. Static electricity and surge damage the LEDS. IDEAL FOR BACKLIGHTING. It is recommended to use a wrist band or AVAILABLE ON TAPE AND REEL. anti-electrostatic glove when handling the LEDs. PACKAGE: 500PCS / REEL. All devices, equipment and machinery must be electri- MOISTURE SENSITIVITY LEVEL : LEVEL 3. cally grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG5704 REV NO: V.1 DATE: JUN/17/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP:1203004176 Selection Guide Dice Part No. APED3528PBC/A Iv (mcd) [2] @ 20mA Lens Type BLUE (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 50 150 40° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5704 REV NO: V.1 DATE: JUN/17/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP:1203004176 Blue APED3528PBC/A SPEC NO: DSAG5704 REV NO: V.1 DATE: JUN/17/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP:1203004176 APED3528PBC/A Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5704 REV NO: V.1 DATE: JUN/17/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP:1203004176 PACKING & LABEL SPECIFICATIONS APED3528PBC/A SPEC NO: DSAG5704 REV NO: V.1 DATE: JUN/17/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP:1203004176