1.6X0.8mm SMD CHIP LED LAMP ATTENTION P/N: AP1608PBC/A BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features 1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. The Blue source color devices are made with InGaN on LOW POWER CONSUMPTION. SiC Light Emitting Diode. W IDE VIEW ING ANGLE. Static electricity and surge damage the LEDS. IDEAL FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or anti-electrostatic VARIOUS COLORS AND LENS TYPES AVAILABLE. glove when handling the LEDs. PACKAGE: 2000PCS / REEL. All devices, equipment and machinery must be electrically MOISTURE SENSITIVITY LEVEL : LEVEL 3. grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAE5151 REV NO: V.6 DATE: MAR/25/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203003728 Selection Guide Part No. Dice AP1608PBC/A Iv (mcd) [2] @ 20mA Lens Type BLUE (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2 θ 1/2 18 60 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 110 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE5151 REV NO: V.6 DATE: MAR/25/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203003728 Blue AP1608PBC/A SPEC NO: DSAE5151 REV NO: V.6 DATE: MAR/25/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203003728 AP1608PBC/A Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAE5151 REV NO: V.6 DATE: MAR/25/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203003728 PACKING & LABEL SPECIFICATIONS AP1608PBC/A SPEC NO: DSAE5151 REV NO: V.6 DATE: MAR/25/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1203003728