PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 5KP5.0 THRU 5KP110CA 5KP5.0J THRU 5KP110CAJ FEATURES • • • • • • • • Stand-off Voltage 5.0 to 110 Volts Peak Pulse Power 5000 Watts R-6 Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass passivated junction or silastic guard junction (open junction) 5000W peak pulse power capability with a 10/1000μs Waveform, repetition rate (duty cycle): 0.05% Excellent clamping capability Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to V(BR) Devices with V(BR)＞10V, ID are typically less than 1.0μA High temperature soldering guaranteed: 265℃/10 seconds, 0.375” (9.5mm) lead length, 51bs.(2.3kg) tension 1.0(25.4) MIN .052(1.3) .048(1.2) DIA .360(9.1) .340(8.6) .360(9.1) .344(8.6) DIA 1.0(25.4) MIN Dimensions in inches and (millimeters) MECHANICAL DATA • • • • • Cass: molded plastic body over passivated junction Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: The Color bands denotes the cathode, which is postitive with respect to the anode under normal TVS operation Mounting Position: any Weight: 0.07 ounces, 2.1 grams DEVICES FOR BIDRECTIONAL APPLICATIONS • • For bidirectional use C or CA suffix for types 5KP5.0 thru 5KP110 (e.g. 5KP7.5CA, 5KP110CA).Electrical Characteristics apply in both directions. Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Ratings Peak Pulse power dissipation with a 10/1000μs waveform (NOTE1) Peak Pulse current with a 10/1000μs waveform (NOTE1) Steady Stage Power Dissipation at TL=75℃ Lead lengths 0.375”(9.5mm)(Note2) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method)(Note 3) Maximum forward voltage at 100.0A (NOTE 3) Operating Junction and Storage Temperature Range Symbols Value Unit PPPM IPPM Minimum5000 See Table 1 Watts Amps PM(AV) 8.0 Watts IFSM 400.0 Amps VF TJ, TSTG 3.5 50 to +150 Volts ℃ Notes: 1. 2. 3. Non-repetitive current pulse, per Fig.3 and derated above T A=25℃ per Fig.2 Mounted on copper pads ares of 0.8×0.8”(20×20mm) per Fig 5. Measured on 8.3ms single half sine-wave or equivalent wave, duty cycle=4 pulses per minute maximum Web Site: www.hkmic.com PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 5KP5.0 THRU 5KP110CA 5KP5.0J THRU 5KP110CAJ Stand-off Voltage 5.0 to 110 Volts Peak Pulse Power 5000 Watts Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE1 Device Type 5KP5.0/J 5KP5.0A/J 5KP6.0/J 5KP6.0A/J 5KP6.5/J 5KP6.5A/J 5KP 7.0/J 5KP7.0A/J 5KP7.5/J 5KP7.5A/J 5KP8.0/J 5KP8.0A/J 5KP 8.5/J 5KP8.5A/J 5KP9.0/J 5KP9.0A/J 5KP10/J 5KP10A/J 5KP11/J 5KP11A/J 5KP12/J 5KP12A/J 5KP13/J 5KP13A/J 5KP14/J 5KP14A/J 5KP15/J 5KP15A/J 5KP16/J 5KP16A/J 5KP17/J 5KP17A/J 5KP18/J 5KP18A/J 5KP20/J 5KP20A/J 5KP22/J 5KP22A/J 5KP24/J 5KP24A/J 5KP26/J 5KP26A/J 5KP28/J 5KP28A/J 5KP30/J 5KP30A/J 5KP33/J 5KP33A/J MIN MAX Test Current at IT (mA) 6.4 6.4 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10 10 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20 20 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 7.3 7 8.15 7.37 8.82 7.98 9.51 8.6 10.2 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38 34.4 40.7 36.8 44.9 40.6 50 50 50 50 50 50 50 50 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Breakdown Voltage V(BR)(Volts) (Note 1) Stand-off Voltage VWM (Volts) 5 5 6 6 6.5 6.5 7 7 7.5 7.5 8 8 8.5 8.5 9 9 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 Maximum Reverse Leakage at VWM ID (μA) 2000 2000 5000 5000 2000 2000 1000 100 250 250 150 150 50 50 20 20 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Web Site: www.hkmic.com Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) 521 543 439 485 407 446 376 417 350 388 333 368 314 347 296 325 266 294 249 275 227 251 210 233 194 216 186 205 174 192 164 181 155 171 140 154 127 141 116 129 107 119 100 110 93.5 103 84.7 93.8 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12 14.3 12.9 15 13.6 15.9 14.4 16.9 15.4 18.8 17 20.1 18.2 22 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43 38.9 46.6 42.1 50.1 45.4 53.5 48.4 59 53.3 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.076 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.089 0.09 0.09 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.1 0.1 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 5KP5.0 THRU 5KP110CA 5KP5.0J THRU 5KP110CAJ Stand-off Voltage 5.0 to 110 Volts Peak Pulse Power 5000 Watts Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE 1 (Cont’d) Device Type 5KP36 5KP36A 5KP40 5KP40A 5KP43 5KP43A 5KP45 5KP45A 5KP48 5KP48A 5KP51 5KP51A 5KP54 5KP54A 5KP58 5KP58A 5KP60 5KP60A 5KP64 5KP64A 5KP70 5KP70A 5KP75 5KP75A 5KP78 5KP78A 5KP85 5KP85A 5KP90 5KP90A 5KP100 5KP100A 5KP110 5KP110A MIN MAX Test Current at IT (mA) 40 40 44.4 44.4 47.8 47.8 50 50 53.3 53.3 56.1 56.1 60 60 64.4 64.4 66.7 66.7 71.1 71.1 77.6 77.8 83.3 83.3 86.7 86.7 94.4 94.4 100 100 111 111 122 122 48.9 44.2 54.3 49.1 58.4 52.8 61.1 55.3 65.2 58.9 69.3 62.7 73.3 66.3 78.7 71.2 81.5 73.7 96.9 78.6 95.1 86 102 92.1 106 95.8 115 104 122 111 136 123 149 135 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Breakdown Voltage V(BR)(Volts) (Note 1) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage At VWM ID (μA) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 77.8 86.1 70 77.5 65.2 72 62.3 68.8 58.5 64.6 54.9 60.7 51.9 57.4 48.5 53.4 46.7 51.7 43.9 48.5 40 44.2 37.3 41.3 36 39.7 33.1 36.5 31.3 34.2 27.9 30.9 25.5 28.2 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 94 107 97 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.11 0.11 0.11 0.11 0.11 0.112 0.112 Notes: (1) (2) (3) V(BR) measured after IT applied for 300ms IT =square wave pulse or equivalent Surge current waveform per Figure 3 and derate per Fig.2 All terms and symbols are consistent with ANSI/IEEE C62.35 Web Site: www.hkmic.com PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR 5KP5.0 THRU 5KP110CA 5KP5.0J THRU 5KP110CAJ Stand-off Voltage 5.0 to 110 Volts Peak Pulse Power 5000 Watts FIG.1- PEAK PULSE POWER RATING CURVE P PPM, PEAK PULSE POWER, kW 100 Non-Repetitive Pulse Waveform Shown in Figure 3 TA=25 ℃ 10 1.0 0.1 0.1μs 1.0μs 10μs 100μs 10ms 1.0ms t d ,PULSE WIDTH, SEC PEAK PULSE POWER (PPP ) OR CURRENT(IPP ) DERATING IN PERCENTAGE % RATING AND CHARACTERISTIC CURVES 5KP5.0/J THRU 5KP110A/J FIG.2- PULSE DERATING CURVE 100 75 50 25 0 0 FIG.3- PULSE WAVEFORM CJ, JUNCTION CAPACITANCE, pF 10/1000usec Waveform as Defined by R.E.A. td 0 1.0 2.0 t, TIME, ms 4.0 3.0 125 175 150 200 TJ=25 ℃ f = 1.0MHz Vsig = 50mVp-p MEASURED at ZERO BIAS 10,000 MEASURED at STAND-OFF VOLTAGE,VWM 1000 100 FIG.5- STEADY STATE POWER DERATING CURVE 1 10 100 200 V(BR) ,BREALDOWN VOLTAGE, VOLTS 8 60 Hz Resistive or induction load 6 L = 0.375" (9.5mm) LEAD LENGTHS 4 2 0.8×0.8×0.040" (20×20mm) COPPER HEAT SINKS 0 0 25 50 75 100 125 150 TL ,LEAD TEMPERATURE ℃ 175 200 IFSM, PEAK FORWARD SURGE CURRENT, AMPERES I PPM, PEAK PULSE CURRENT ,% PM(AV), STEADY STATE POWER DISSIPATION, WATTS 0 100 FIG.4- TYPICAL JUNCTION CAPACITANCE Half Value-lpp 2 50 75 100,000 Pulse Width (td)is Defined as the Point Where the Peak Current Decays to 50% of lpp Peak Value lppm 100 50 TA , AMBIENT TEMPERATURE (℃) 150 tf=10use 25 FIG.6 - MAXMIUM NON-REPETITIVE FORWARD SURGE CURRENT 400 8.3ms Single Half Since-Wave JEDEC Method 350 300 250 200 150 100 1 Web Site: www.hkmic.com 10 NUMBER OF CYCLES AT 60 Hz 100