PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR P4KE6.8 THRU P4KE440CA(GPP) P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION) Breakdown Voltage 6.8 to 400 Volts Peak Pulse Power 400 Watts FEATURES • • • • • • • • DO-41 Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass passivated or silastic guard junction (open junction) 400W peak pulse power capability with a 10/1000μs Waveform, repetition rate (duty cycle): 0.0%1 Excellent clamping capability Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bidirectional types Devices with V(BR)≥10V, ID are typically ID less than 1.0μA High temperature soldering guaranteed: 265℃/10 seconds, 0.375” (9.5mm) lead length, 51bs.(2.3kg) tension .034(0.9) .028(0.7) DIA. 1.0(25.4) MIN. .205(5.2) .165(4.2) .107(2.7) 1.0(25.4) MIN. .080(2.0) DIA. Dimensions in inches and (millimeters) MECHANICAL DATA • • • • • Cass: JEDEC DO-204AL,molded plastic body over passivated junction Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color bands denotes positive end (cathode) except for bidirectional types Mounting position: any Weight: 0.012 ounces, 0.3 gram DEVICES FOR BIDRECTIONAL APPLICATIONS • • For bidirectional use C or CA suffix for types P4KE7.5 THRU TYPES P4K440 (e.g. P4KE7.5CA, P4KE440CA).Electrical Characteristics apply in both directions. Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Ratings Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,FIG.1) Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3) Steady Stage Power Dissipation at TT=75℃ Lead lengths 0.375”(9.5)(Note2) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (Note3) Maximum instantaneous forward voltage at 25A for unidirectional only (NOTE 3) Operating Junction and Storage Temperature Range Symbols Value Unit PPPM IPPM PM(AV) Minimum 400 See Table 1 1.0 Watts Watt Amps 40.0 IFSM Amps VF 3.5/6.5 Volts TJ, TSTG 50 to +150 ℃ Notes: 1. 2. 3. 4. Non-repetitive current pulse, per Fig.3 and derated above T A=25℃ per Fig.2 Mounted on copper pads to each terminal of 0.31 in (8.0mm2) per Fig 5. Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minutes maximum. VF=3.0 Volts max. for devices of V (BR) ≤200V, and VF=6.5 Volts max. for devices of V(BR)≥200v Web Site: www.hkmic.com PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR P4KE6.8 THRU P4KE440CA(GPP) P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION) Breakdown Voltage Peak Pulse Power 6.8 to 400 Volts 400 Watts Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE1 Device Type P4KE6.8/J P4KE6.8A/J P4KE7.5/J P4KE7.5A/J P4KE8.2/J P4KE8.2A/J P4KE9.1/J P4KE9.1A/J P4KE10/J P4KE10A/J P4KE11/J P4KE11A/J P4KE12/J P4KE12A/J P4KE13/J P4KE13A/J P4KE15/J P4KE15A/J P4KE16/J P4KE16A/J P4KE18/J P4KE18A/J P4KE20/J P4KE20A/J P4KE22/J P4KE22A/J P4KE24/J P4KE24A/J P4KE27/J P4KE27A/J P4KE30/J P4KE30A/J P4KE33/J P4KE33A/J P4KE36/J P4KE36A/J P4KE39/J P4KE39A/J P4KE43/J P4KE43A/J P4KE47/J P4KE47A/J P4KE51/J P4KE51A/J P4KE56/J P4KE56AJ/ P4KE62/J P4KE62A/J MIN MAX Test Current at IT (mA) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 7.65 9 9.5 9.9 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18 19 19.8 20.9 21.6 22.8 24.3 25.7 27 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.7 48.5 50.4 53.2 55.8 58.9 7.48 7.14 8.25 7.88 9.02 8.61 10 9.55 11 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22 21 24.2 23.1 26.4 25.2 29.7 28.4 33 31.5 36.3 34.7 39.6 37.8 42.9 41 47.3 45.2 51.7 49.4 56.1 43.6 61.6 58.8 68.8 65.1 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Breakdown Voltage V(BR)(Volts) (Note 1) Stand-off Voltage VWM (Volts) 5.5 5.8 6.05 6.4 6.63 7.02 7.37 7.78 8.1 8.55 8.92 9.4 9372 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 Maximum Reverse Leakage at VWM ID (μA) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 37 38.1 34.2 35.4 32 33.1 29 29.9 26.7 27.6 24.7 25.6 23.1 24 21.1 22 18.2 18.9 17 17.8 15.1 15.9 13.7 14.4 12.5 13.1 11.5 12 10.2 10.7 92 9.7 8.4 8.8 7.7 8 7.1 7.4 6.5 6.7 5.9 6.2 5.4 5.7 5 5.2 4.5 4.7 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15 14.5 16.2 15.6 17.3 16.7 19 18.2 22 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77 89 85 0.06 0.06 0.064 0.064 0.068 0.068 0.071 0.071 0.076 0.076 0.078 0.078 0.081 0.081 0.084 0.084 0.087 0.087 0.089 0.089 0.091 0.091 0.093 0.093 0.095 0.095 0.097 0.097 0.099 0.099 0.1 0.1 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 0.104 0.105 0.105 0.106 0.106 0.107 0.107 Web Site: www.hkmic.com PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR P4KE6.8 THRU P4KE440CA(GPP) P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION) Breakdown Voltage Peak Pulse Power 6.8 to 400 Volts 400 Watts Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE 1 (Cont’d) Device Type P4KE68/J P4KE68A/J P4KE75/J P4KE75A/J P4KE82/J P4KE82A/J P4KE91/J P4KE91A/J P4KE100J/ P4KE100A/J P4KE110/J P4KE110A/J P4KE120/J P4KE120A/J P4KE130/J P4KE130A/J P4KE150/J P4KE150A/J P4KE160/J P4KE160A/J P4KE170/J P4KE170A/J P4KE180/J P4KE180A/J P4KE200/J P4KE200A/J P4KE220/J P4KE220A/J P4KE250/J P4KE250A/J P4KE300/J P4KE300A/J P4KE350/J P4KE350A/J P4KE400/J P4KE400A/J P4KE440/J P4KE440A/J MIN MAX Test Current at IT (mA) 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90 95 99 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 25 237 270 285 315 332 360 380 396 418 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 159 175 167 187 179 197 189 220 210 242 231 275 267 330 315 385 368 440 420 484 462 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Breakdown Voltage V(BR)(Volts) (Note 1) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (μA) (Note3) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81 85.5 89.2 94 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 245 284 300 324 342 356 376 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 4.1 4.3 3.7 3.9 3.4 3.5 3.1 3.2 2.8 2.9 2.5 2.6 2.3 2.4 2.1 2.2 1.9 1.9 1.7 1.8 1.6 1.7 1.6 1.6 1.4 1.5 1.2 1.2 1.1 1.2 0.93 1 0.79 0.83 0.7 0.73 0.63 0.66 98 92 105 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.11 0.11 0.11 0.11 0.11 0.11 0.11 0.11 0.11 0.11 Notes: (1) (2) (3) (4) (5) V(BR) measured after IT applied for 300ms IT =square wave pulse or equivalent Surge current waveform per Figure 3 and derate per Fig.2 For bidirectional type having VWM of 10 volts and less, the l D limit is doubled All terms and symbols are consistent with ANSI/IEEE C62.35 No suffix is Gpp passivated junction, Suffix “J” is open junction (silastic guard junction) Web Site: www.hkmic.com PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR P4KE6.8 THRU P4KE440CA(GPP) P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION) Breakdown Voltage 6.8 to 400 Volts Peak Pulse Power 400 Watts FIG.1- PEAK PULSE POWER RATING CURVE P PPM, PEAK PULSE POWER, kW 100 Non-Repetitive Pulse Waveform Shown in Figure 3 TA=25 ℃ 10 1.0 0.1 0.1μs 1.0μs 10ms FIG.3- PULSE WAVEFORM Pulse Width (td)is Defined as the Point Where the Peak Current Decays to 50% of lpp tf=10use I PPM, PEAK PULSE CURRENT-% 1.0ms t d ,PULSE WIDTH, SEC 150 10/1000usec Waveform as Defined by R.E.A. td 0 2.0 1.0 t, TIME, ms 4.0 3.0 FIG.5- STEADY STATE POWER DERATING CURVE 1.00 50 25 0 60 Hz Resistive or induction load L = 0.375" (9.5mm) LEAD LENGTHS 1000 25 50 75 100 125 150 175 200 FIG.7- TYPICAL REVERSE LEAKAGE CHARACTERISTICS HEASURED AT DEVICES STAND-OFF VOLTAGE, V WM TA=25 ℃ 0.1 0 100 200 300 400 IFSM, PEAK FORWARD SURGE CURRENT, AMPERES 0 100 0.01 125 150 175 200 Measured at Stand-Off Voltage (V MW) 10 V(BR) ,BREALDOWN VOLTAGE, 100 200 VOLTS FIG.6 - MAXMIUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY TL ,LEAD TEMPERATURE ℃ 1 100 Measured at Zero Blas 1.6×1.6×.040" (40×40×1mm) COPPER HEAT SINKS 0.25 10 75 10,000 10 1.0 0.50 50 TA , AMBIENT TEMPERATURE (℃) 0.75 0 25 0 TJ=25 ℃ f = 1.0MHz Vsig = 50mVp-p CJ, JUNCTION CAPACITANCE, pF 0 75 100,000 Half Value-lpp 2 50 FIG.2- PULSE DERATING CURVE 100 FIG.4- TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL Peak Value lppm 100 PM(AV), STEADY STATE POWER DISSIPATION, WATTS i D,INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES 100μs 10μs PEAK PULSE POWER (PPP ) OR CURRENT(IPP ) DERATING IN PERCENTAGE % RATING AND CHARACTERISTIC CURVES P4KE6.8/J THRU P4KE440CA/J 500 V(BR ) ,BREAKDOWN VOLTAGE, VOLTS Web Site: www.hkmic.com 50 TJ=TJ max 8.3ms Single Half Since-Wave JEDEC Method 40 30 20 10 0 1 10 NUMBER OF CYCLES AT 60 Hz 100