MIC P4KE9.1A

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR
P4KE6.8 THRU P4KE440CA(GPP)
P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION)
Breakdown Voltage
6.8 to 400 Volts
Peak Pulse Power
400 Watts
FEATURES
•
•
•
•
•
•
•
•
DO-41
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Glass passivated or silastic guard junction (open junction)
400W peak pulse power capability with a 10/1000μs
Waveform, repetition rate (duty cycle): 0.0%1
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less than 1.0ps from 0 Volts to
V(BR) for unidirectional and 5.0ns for bidirectional types
Devices with V(BR)≥10V, ID are typically ID less than 1.0μA
High temperature soldering guaranteed:
265℃/10 seconds, 0.375” (9.5mm) lead length,
51bs.(2.3kg) tension
.034(0.9)
.028(0.7)
DIA.
1.0(25.4)
MIN.
.205(5.2)
.165(4.2)
.107(2.7)
1.0(25.4)
MIN.
.080(2.0)
DIA.
Dimensions in inches and (millimeters)
MECHANICAL DATA
•
•
•
•
•
Cass: JEDEC DO-204AL,molded plastic body over passivated junction
Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color bands denotes positive end (cathode) except for bidirectional types
Mounting position: any
Weight: 0.012 ounces, 0.3 gram
DEVICES FOR BIDRECTIONAL APPLICATIONS
•
•
For bidirectional use C or CA suffix for types P4KE7.5 THRU TYPES P4K440 (e.g. P4KE7.5CA,
P4KE440CA).Electrical Characteristics apply in both directions.
Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
Ratings at 25℃ ambient temperature unless otherwise specified
Ratings
Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,FIG.1)
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3)
Steady Stage Power Dissipation at TT=75℃
Lead lengths 0.375”(9.5)(Note2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) (Note3)
Maximum instantaneous forward voltage at 25A for
unidirectional only (NOTE 3)
Operating Junction and Storage Temperature Range
Symbols
Value
Unit
PPPM
IPPM
PM(AV)
Minimum 400
See Table 1
1.0
Watts
Watt
Amps
40.0
IFSM
Amps
VF
3.5/6.5
Volts
TJ, TSTG
50 to +150
℃
Notes:
1.
2.
3.
4.
Non-repetitive current pulse, per Fig.3 and derated above T A=25℃ per Fig.2
Mounted on copper pads to each terminal of 0.31 in (8.0mm2) per Fig 5.
Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minutes maximum.
VF=3.0 Volts max. for devices of V (BR) ≤200V, and VF=6.5 Volts max. for devices of V(BR)≥200v
E-mail: [email protected]
Web Site: www.cnmic.com
PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR
P4KE6.8 THRU P4KE440CA(GPP)
P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION)
Breakdown Voltage
Peak Pulse Power
6.8 to 400 Volts
400 Watts
Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE1
Device
Type
P4KE6.8/J
P4KE6.8A/J
P4KE7.5/J
P4KE7.5A/J
P4KE8.2/J
P4KE8.2A/J
P4KE9.1/J
P4KE9.1A/J
P4KE10/J
P4KE10A/J
P4KE11/J
P4KE11A/J
P4KE12/J
P4KE12A/J
P4KE13/J
P4KE13A/J
P4KE15/J
P4KE15A/J
P4KE16/J
P4KE16A/J
P4KE18/J
P4KE18A/J
P4KE20/J
P4KE20A/J
P4KE22/J
P4KE22A/J
P4KE24/J
P4KE24A/J
P4KE27/J
P4KE27A/J
P4KE30/J
P4KE30A/J
P4KE33/J
P4KE33A/J
P4KE36/J
P4KE36A/J
P4KE39/J
P4KE39A/J
P4KE43/J
P4KE43A/J
P4KE47/J
P4KE47A/J
P4KE51/J
P4KE51A/J
P4KE56/J
P4KE56AJ/
P4KE62/J
P4KE62A/J
MIN
MAX
Test
Current
at
IT
(mA)
6.12
6.45
6.75
7.13
7.38
7.79
8.19
7.65
9
9.5
9.9
10.5
10.8
11.4
11.7
12.4
13.5
14.3
14.4
15.2
16.2
17.1
18
19
19.8
20.9
21.6
22.8
24.3
25.7
27
28.5
29.7
31.4
32.4
34.2
35.1
37.1
38.7
40.9
42.3
44.7
45.7
48.5
50.4
53.2
55.8
58.9
7.48
7.14
8.25
7.88
9.02
8.61
10
9.55
11
10.5
12.1
11.6
13.2
12.6
14.3
13.7
16.5
15.8
17.6
16.8
19.8
18.9
22
21
24.2
23.1
26.4
25.2
29.7
28.4
33
31.5
36.3
34.7
39.6
37.8
42.9
41
47.3
45.2
51.7
49.4
56.1
43.6
61.6
58.8
68.8
65.1
10
10
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Breakdown Voltage
V(BR)(Volts) (Note 1)
E-mail: [email protected]
Stand-off
Voltage
VWM
(Volts)
5.5
5.8
6.05
6.4
6.63
7.02
7.37
7.78
8.1
8.55
8.92
9.4
9372
10.2
10.5
11.1
12.1
12.8
12.9
13.6
14.5
15.3
16.2
17.1
17.8
18.8
19.4
20.5
21.8
23.1
24.3
25.6
26.8
28.2
29.1
30.8
31.6
33.3
34.8
36.8
38.1
40.2
41.3
43.6
45.4
47.8
50.2
53.0
Maximum
Reverse
Leakage at
VWM ID (μA)
Maximum
Peak Pulse
Current
IPPM (Note 2)
(Amps)
Maximum
Clamping
Voltage at
IPPM
VC(Volts)
Maximum
Temperature
Coefficient
of V(BR)
(%/℃)
1000
1000
500
500
200
200
50
50
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
37
38.1
34.2
35.4
32
33.1
29
29.9
26.7
27.6
24.7
25.6
23.1
24
21.1
22
18.2
18.9
17
17.8
15.1
15.9
13.7
14.4
12.5
13.1
11.5
12
10.2
10.7
92
9.7
8.4
8.8
7.7
8
7.1
7.4
6.5
6.7
5.9
6.2
5.4
5.7
5
5.2
4.5
4.7
10.8
10.5
11.7
11.3
12.5
12.1
13.8
13.4
15
14.5
16.2
15.6
17.3
16.7
19
18.2
22
21.2
23.5
22.5
26.5
25.2
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52
49.9
56.4
53.9
61.9
59.3
67.8
64.8
73.5
70.1
80.5
77
89
85
0.06
0.06
0.064
0.064
0.068
0.068
0.071
0.071
0.076
0.076
0.078
0.078
0.081
0.081
0.084
0.084
0.087
0.087
0.089
0.089
0.091
0.091
0.093
0.093
0.095
0.095
0.097
0.097
0.099
0.099
0.1
0.1
0.101
0.101
0.102
0.102
0.103
0.103
0.104
0.104
0.104
0.104
0.105
0.105
0.106
0.106
0.107
0.107
Web Site: www.cnmic.com
PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR
P4KE6.8 THRU P4KE440CA(GPP)
P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION)
Breakdown Voltage
Peak Pulse Power
6.8 to 400 Volts
400 Watts
Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE 1 (Cont’d)
Device
Type
P4KE68/J
P4KE68A/J
P4KE75/J
P4KE75A/J
P4KE82/J
P4KE82A/J
P4KE91/J
P4KE91A/J
P4KE100J/
P4KE100A/J
P4KE110/J
P4KE110A/J
P4KE120/J
P4KE120A/J
P4KE130/J
P4KE130A/J
P4KE150/J
P4KE150A/J
P4KE160/J
P4KE160A/J
P4KE170/J
P4KE170A/J
P4KE180/J
P4KE180A/J
P4KE200/J
P4KE200A/J
P4KE220/J
P4KE220A/J
P4KE250/J
P4KE250A/J
P4KE300/J
P4KE300A/J
P4KE350/J
P4KE350A/J
P4KE400/J
P4KE400A/J
P4KE440/J
P4KE440A/J
MIN
MAX
Test
Current
at
IT
(mA)
61.2
64.6
67.5
71.3
73.8
77.9
81.9
86.5
90
95
99
105
108
114
117
124
135
143
144
152
153
162
162
171
180
190
198
209
25
237
270
285
315
332
360
380
396
418
74.8
71.4
82.5
78.8
90.2
86.1
100
95.5
110
105
121
116
132
126
143
137
165
159
175
167
187
179
197
189
220
210
242
231
275
267
330
315
385
368
440
420
484
462
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Breakdown Voltage
V(BR)(Volts) (Note 1)
Stand-off
Voltage
VWM
(Volts)
Maximum
Reverse
Leakage at
VWM ID (μA)
(Note3)
Maximum
Peak Pulse
Current
IPPM (Note 2)
(Amps)
Maximum
Clamping
Voltage at
IPPM
VC(Volts)
Maximum
Temperature
Coefficient
of V(BR)
(%/℃)
55.1
58.1
60.7
64.1
66.4
70.1
73.7
77.8
81
85.5
89.2
94
97.2
102
105
111
121
128
130
136
138
145
146
154
162
171
175
185
202
214
243
245
284
300
324
342
356
376
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
4.1
4.3
3.7
3.9
3.4
3.5
3.1
3.2
2.8
2.9
2.5
2.6
2.3
2.4
2.1
2.2
1.9
1.9
1.7
1.8
1.6
1.7
1.6
1.6
1.4
1.5
1.2
1.2
1.1
1.2
0.93
1
0.79
0.83
0.7
0.73
0.63
0.66
98
92
105
103
118
113
131
125
144
137
158
152
173
165
187
179
215
207
230
219
244
234
258
246
287
274
344
328
360
344
430
414
504
482
574
548
631
602
0.104
0.104
0.105
0.105
0.105
0.105
0.106
0.106
0.106
0.106
0.107
0.107
0.107
0.107
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
Notes:
(1)
(2)
(3)
(4)
(5)
V(BR) measured after IT applied for 300ms IT =square wave pulse or equivalent
Surge current waveform per Figure 3 and derate per Fig.2
For bidirectional type having VWM of 10 volts and less, the l D limit is doubled
All terms and symbols are consistent with ANSI/IEEE C62.35
No suffix is Gpp passivated junction, Suffix “J” is open junction (silastic guard junction)
E-mail: [email protected]
Web Site: www.cnmic.com
PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPERSSOR
P4KE6.8 THRU P4KE440CA(GPP)
P4KE6.8J THRU P4KE440CAJ(OPEN JUNCTION)
Breakdown Voltage
6.8 to 400 Volts
Peak Pulse Power
400 Watts
FIG.1- PEAK PULSE POWER RATING CURVE
P PPM, PEAK PULSE POWER, kW
100
Non-Repetitive
Pulse Waveform
Shown in Figure 3
TA=25 ℃
10
1.0
0.1
0.1μs
1.0μs
FIG.3- PULSE WAVEFORM
Pulse Width (td)is Defined
as the Point Where the Peak
Current Decays to 50% of lpp
tf=10use
100
10/1000usec Waveform
as Defined by R.E.A.
td
0
2.0
1.0
t, TIME, ms
4.0
3.0
FIG.5- STEADY STATE POWER DERATING CURVE
1.00
50
25
0
60 Hz
Resistive or induction load
L = 0.375" (9.5mm)
LEAD LENGTHS
0
25
50
75
100
125
150
175
200
FIG.7- TYPICAL REVERSE LEAKAGE CHARACTERISTICS
100
HEASURED AT DEVICES
STAND-OFF
VOLTAGE, V WM
TA=25 ℃
0.1
0.01
0
125
150
175
200
1000
Measured at
Stand-Off
Voltage (V MW)
10
V(BR) ,BREALDOWN VOLTAGE,
100
200
VOLTS
FIG.6 - MAXMIUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT UNIDIRECTIONAL ONLY
TL ,LEAD TEMPERATURE ℃
1
100
Measured at
Zero Blas
1.6×1.6×.040"
(40×40×1mm)
COPPER HEAT SINKS
0.25
10
75
10,000
10
1.0
0.50
50
TA , AMBIENT TEMPERATURE (℃)
0.75
0
25
0
TJ=25 ℃
f = 1.0MHz
Vsig = 50mVp-p
CJ, JUNCTION CAPACITANCE, pF
PM(AV), STEADY STATE POWER DISSIPATION,
WATTS
0
75
100,000
Half Value-lpp
2
50
FIG.2- PULSE DERATING CURVE
100
FIG.4- TYPICAL JUNCTION CAPACITANCE
UNIDIRECTIONAL
Peak Value
lppm
100
200
300
IFSM, PEAK FORWARD SURGE CURRENT,
AMPERES
I PPM, PEAK PULSE CURRENT-%
10ms
1.0ms
t d ,PULSE WIDTH, SEC
150
i D,INSTANTANEOUS REVERSE LEAKAGE
CURRENT, MICROAMPERES
100μs
10μs
PEAK PULSE POWER (PPP ) OR CURRENT(IPP )
DERATING IN PERCENTAGE %
RATING AND CHARACTERISTIC CURVES P4KE6.8/J THRU P4KE440CA/J
50
TJ=TJ max
8.3ms Single Half Since-Wave
JEDEC Method
40
30
20
10
0
10
1
NUMBER OF CYCLES AT 60 Hz
500
400
V(BR ) ,BREAKDOWN VOLTAGE, VOLTS
E-mail: [email protected]
Web Site: www.cnmic.com
100