www.hammondmfg.com 1414 PH Series Enclosures - NEMA 12, 13 Continuous Hinge, Clamped Cover Industrial Enclosures Junction Boxes Application Construction Finish • Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. • Provides a degree of protection from falling dirt, dust, oil and water. • Body formed from 16 gauge or 14 gauge steel. Covers are formed from 14 gauge steel. • Smooth, continuously welded seams without knockouts, cutouts or holes. • Welded brackets provide for enclosure mounting. • Continuously hinged cover is secured with stainless steel clamps and plated steel screws. • Seamless poured-in place gasket. • Models larger than 4" x 4" include a removable 14 gauge inner panel. • Internal threaded weld studs are provided for mounting inner panels. • A bonding stud is provided on the door and a grounding stud is provided in the enclosure. • Cover and enclosure are phosphatized and finished in ANSI 61 gray recoatable powder coating. • Removable inner panel is finished in white powder coating. Standards • UL 508 Type 12, 13 • CSA Type 12, 13 • Complies with • NEMA Type 12 and 13 • JIC EGP-1-1967 unless marked1 • IEC 60529, IP54 Technical references and CAD downloads available at www.hammondmfg.com 9 Accessories • Additional inner panels...see page 436 • Breather kits...see page 400-401 • Door clamping hardware ...see page 429 • Filter fans...see page 371-384 • Heaters...see page 393-396 • Louvered ventilating plates ...see page 402 • Terminal kit assemblies ...see page 441 • Thermostats...see page 397 • Swing panel...see page 440 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com 1414 PH Series Enclosures - NEMA 12, 13 Continuous Hinge, Clamped Cover Industrial Enclosures Part No. Part No. Without Inner Panel Panel Size B C D E F G H J L 4 — 1414PHA1 6 1414PHC1 1414PHCLP1 8 1414PHG 1414PHGLP 1414PHRG 1414PHRGLP 6 4 — 1414PHA41 1414PHC41 1414PHC4LP1 6 6 1414PHE 1414PHELP 8 1414PHH4 1414PHH4LP 10 1414PHI 1414PHILP 8 1414PHRI 1414PHRILP 1414PHKC4 1414PHKC4LP 12 12 1414PHK 1414PHKLP 1414PHRK 1414PHRKLP 10 8 1414PHG6 1414PHG6LP 10 1414PHI6 1414PHI6LP 10 1414PHJ6 1414PHJ6LP 1414PHL6 1414PHL6LP 12 1414PHMH6 1414PHMH6LP 14 1414PHM6 1414PHM6LP 14 1414PHRM6 1414PHRM6LP 12 1414PHN6 1414PHN6LP 16 1414PHO6 1414PHO6LP 16 1414PHRO6 1414PHRO6LP 14 1414PHK8 1414PHK8LP 12 1414PHM8 1414PHM8LP 14 1414PHO8 1414PHO8LP 16 1414PHO10 1414PHO10LP 16 1 Does not meet JIC requirements 4 4 6 8 4 4 6 8 8 10 6 10 12 6 8 10 12 8 12 14 10 14 16 10 12 14 14 3.0 3.0 3.5 3.5 4.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 10.0 — 4.88 6.75 4.88 — 4.88 4.88 6.75 8.75 6.88 10.75 10.75 8.88 6.75 8.75 8.75 10.75 12.75 12.75 10.88 14.75 14.75 12.88 10.75 12.75 14.75 14.75 — 2.88 4.88 6.75 — 2.88 4.88 6.88 6.88 8.75 4.88 8.88 10.75 4.88 6.88 8.88 10.88 6.88 10.88 12.75 8.88 12.88 14.75 8.88 10.88 12.88 12.88 — 2.51 3.01 3.01 — 3.51 3.51 3.51 3.51 3.51 3.51 4.51 4.51 5.51 5.51 5.51 5.51 5.51 5.51 5.51 5.51 5.51 5.51 7.51 7.51 7.51 9.51 4.75 6.75 8.75 6.75 4.75 6.75 6.75 8.75 10.75 8.75 12.75 12.75 10.75 8.75 10.75 10.75 12.75 14.75 14.75 12.75 16.75 16.75 14.75 12.75 14.75 16.75 16.75 2 2 4 6 2 2 4 6 6 8 4 8 10 4 6 8 10 6 10 12 8 12 14 8 10 12 12 2.64 2.64 3.14 3.14 3.64 3.64 3.64 3.64 3.64 3.64 3.64 4.64 4.64 5.64 5.64 5.64 5.64 5.64 5.64 5.64 5.64 5.64 5.64 7.64 7.64 7.64 9.64 5.5 7.5 9.5 7.5 5.5 7.5 7.5 9.5 11.5 9.5 13.5 13.5 11.5 9.5 11.5 11.5 13.5 15.5 15.5 13.5 17.5 17.5 15.5 13.5 15.5 17.5 17.5 Technical references and CAD downloads available at www.hammondmfg.com 4.31 6.31 8.31 6.31 4.31 6.31 6.31 8.31 10.31 8.31 12.31 12.31 10.31 8.31 10.31 10.31 12.31 14.31 14.31 12.31 16.31 16.31 14.31 12.31 14.31 16.31 16.31 4.31 4.31 6.31 8.31 4.31 4.31 6.31 8.31 8.31 10.31 6.31 10.31 12.31 6.31 8.31 10.31 12.31 8.31 12.31 14.31 10.31 14.31 16.31 10.31 12.31 14.31 14.31 P T U V Y Z 1.5 2.5 1.0 2.5 1.5 2.5 2.5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 3 3 5 7 3 3 5 7 7 9 5 9 11 5 7 9 11 7 11 13 9 13 15 9 11 13 13 — .31 .31 .25 — .31 .31 .31 .31 .25 .31 .31 .25 .31 .31 .31 .31 .31 .31 .25 .31 .31 .25 .31 .31 .31 .31 — .31 .25 .31 — .31 .31 .25 .25 .31 .25 .25 .31 .25 .25 .25 .25 .25 .25 .31 .25 .25 .31 .25 .25 .25 .25 — .56 .63 .56 — .56 .56 .63 .63 .56 .63 .63 .56 .63 .63 .63 .63 .63 .63 .56 .63 .63 .56 .63 .63 .63 .63 — .56 .56 .63 — .56 .56 .56 .56 .63 .56 .56 .63 .56 .56 .56 .56 .56 .56 .63 .56 .56 .63 .56 .56 .56 .56 Ship wt. w/Pnl — 3 6 6 — 4 5 8 10 10 10 13 13 8 12 14 17 12 19 19 18 23 23 18 20 25 26 Ship wt. n/ Pnl 2 2 5 5 3 3 4 7 8 8 8 10 12 7 10 12 15 10 17 17 15 21 21 15 18 22 23 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 Junction Boxes A Cover Dimensions USA: 716.630.7030 Data Subject to change without notice 10