www.hammondmfg.com Polyester Modular Enclosures - NEMA 4X PJ Series - Raised Lid Snap Latch Hinged Cover, Solid and Window Door Snap Latch Detail Window Door Construction Corrosion Resistant Application • Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. • Provides outstanding insulation and protection where equipment may be hosed down or be very wet. • Ideal in applications with high temperatures or highly corrosive environments. Junction Boxes Standards • UL 508 Type 1, 2, 3, 4, 4X, 12 and 13 • CSA Type 1, 2, 3, 4, 4X, 12 and 13 • Complies with • NEMA Type 1, 2, 3, 4, 4X, 12, & 13 • IEC 60529, IP66 • Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled. • Enhanced UV inhibitors protect against outdoor weathering. • Standard JIC sizes under 18"x16". • Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included. • Stainless steel draw type "snap latch" door fasteners. • Door fasteners include a provision for padlocking. • Enclosures are available with bonded polycarbonate viewing windows. • Door is supported with a continuous stainless steel hinge. • Captive oil resistant gasket provides a positive seal. • Threaded brass inserts are provided for mounting feet to the rear of the enclosure. • Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure. Overall Window Dimensions Solid Cover Cover Part No. Part No. A B C PJ664RL PJ664RLW 6.10 6.10 4.18 PJ864RL PJ864RLW 8.00 6.12 4.13 PJ1084RL PJ1084RLW 10.13 8.26 4.13 PJ1086RL PJ1086RLW 10.13 8.26 6.13 PJ12106RL PJ12106RLW 12.13 10.26 6.13 PJ14126RL PJ14126RLW 14.13 12.26 6.13 PJ16148RL PJ16148RLW 16.27 14.40 8.13 PJ18168RL PJ18168RLW 18.40 16.40 8.13 PJ20168RL PJ20168RLW 20.00 16.00 8.13 PJ24208RL PJ24208RLW 24.00 20.00 8.13 PJ24248RL1 PJ24248RLW1 24.00 24.00 8.13 PJ30248RL1 PJ30248RLW1 30.00 24.00 8.13 PJ242010RL1 PJ242010RLW1 24.00 20.00 10.13 PJ242410RL1 PJ242410RLW1 24.00 24.00 10.13 PJ302410RL1 PJ302410RLW1 30.00 24.00 10.13 1 Uses larger mounting foot. See drawing above. Finish • Fiberglass polyester material has a gray finish. • Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or fiberglass. Accessories • Painted steel inner panels ...see page 138 • PJ/ PJU swing panel...see page 138 • Unfinished aluminum inner panels...see page 138 • Fiberglass inner panels ...see page 138 • Terminal kit assemblies ...see page 441 Panel Size D 4.88 6.75 8.75 8.75 10.75 12.75 14.75 16.88 18.44 21.00 21.00 27.00 21.00 21.00 27.00 Technical references and CAD downloads available at www.hammondmfg.com 125 • Operating temperatures between 130°C and -40°C (266°F to -40°F). • Impact index of 6.78J (5 ft/lb). • For corrosion resistance information, please refer to table in the Technical Information section. E 4.88 4.88 6.88 6.88 8.88 10.88 12.88 14.88 14.44 17.00 21.00 21.00 17.00 21.00 21.00 Center G 5.01 6.89 8.89 8.89 10.89 12.89 14.89 16.97 18.54 22.75 22.75 28.75 22.75 22.75 28.75 H 5.01 5.01 7.01 7.01 9.01 11.01 13.01 14.97 14.54 18.75 22.75 22.75 18.75 22.75 22.75 J 3.52 3.47 3.47 5.47 5.47 5.47 7.47 7.47 7.47 7.47 7.47 7.47 9.47 9.47 9.47 S 4.25 6.25 8.25 8.25 10.25 12.25 14.25 16.25 17.81 19.25 19.25 25.25 19.25 19.25 25.25 Z 4.25 4.25 6.25 6.25 8.25 10.25 12.25 14.25 13.81 15.25 19.25 19.25 15.25 19.25 19.25 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com Polyester Modular Enclosures - NEMA 4X PJ Series - Raised Lid Snap Latch Hinged Cover, Solid and Window Door Corrosion Resistant Cover Dimensions K M 6.08 6.08 6.11 7.98 8.44 10.32 8.44 10.32 10.45 12.32 12.45 14.32 13.86 15.73 15.86 17.86 15.43 19.43 20.16 24.16 24.16 24.16 24.16 30.16 20.16 24.16 24.16 24.16 24.16 30.16 U 7.69 9.59 11.77 11.77 13.77 15.73 17.87 20.00 21.59 25.59 25.59 31.59 25.59 25.59 31.59 Technical references and CAD downloads available at www.hammondmfg.com W 7.69 7.71 9.90 9. 11.90 13.85 15.99 18.00 17.59 21.59 25.59 25.59 21.59 25.59 25.59 R 0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.44 0.44 1.00 1.00 1.00 1.00 1.00 1.00 V 0.49 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.52 1.38 1.38 1.38 1.36 1.36 1.36 Optional Panel Part No. 14R0505 14R0705 14R0907 14R0907 14R1109 14R1311 14R1513 P1868 P2068 18P2117 18P2121 18P2721 18P2117 18P2121 18P2721 Optional Window Dim. HxW 4.25x4.25 6.25x4.25 8.37x6.5 8.37x6.5 10.37x8.5 12.37x10.5 13.00x11.00 14.00x12.00 15.00x11.00 16.00x12.00 16.00x16.00 23.00x17.00 16.00x12.00 16.00x16.00 23.00x17.00 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 Junction Boxes Window Solid Cover Cover Part No. Part No. L T PJ664RL PJ664RLW 7.32 5.83 PJ864RL PJ864RLW 9.19 5.85 PJ1084RL PJ1084RLW 11.19 7.85 PJ1086RL PJ1086RLW 11.19 7.85 PJ12106RL PJ12106RLW 13.19 9.85 PJ14126RL PJ14126RLW 15.19 11.85 PJ16148RL PJ16148RLW 17.19 13.71 PJ18168RL PJ18168RLW 19.28 15.72 PJ20168RL PJ20168RLW 20.84 15.31 PJ24208RL PJ24208RLW 25.06 19.73 PJ24248RL1 PJ24248RLW1 25.06 23.73 PJ30248RL1 PJ30248RLW1 31.06 23.73 PJ242010RL1 PJ242010RLW1 25.06 19.70 PJ242410RL1 PJ242410RLW1 25.06 23.70 PJ302410RL1 PJ302410RLW1 31.06 23.70 1 Uses larger mounting foot. See drawing above. USA: 716.630.7030 Data Subject to change without notice 126