www.hammondmfg.com 1420 Series Panel Enclosure Non-Ventilated - NEMA 1 Commercial Enclosures Application Construction Finish • Designed for indoor use to house controls, instruments and components which do not require oil-tight or dust-tight protection. • Enclosure is formed and spot welded from 12 or 14 gauge steel. • Removable 12 gauge inner panel is mounted to the rear of the enclosure on collar studs. • Removable door is attached with slip hinges. • To remove door, a tool is required to remove the #8 screw which captivates hinge. • Door is fastened with a slotted 1/4 turn latch; doors 30” and higher are provided with two latches. • A bonding stud is provided on the door and a grounding stud is provided in the box. • Piano hinge on 12 gauge units • Enclosure and door are finished in ANSI 61 gray powder coating. • Inner panel is finished in white powder coating. Standards • UL 508 Type 1 • CSA Type 1 • Complies with • NEMA Type 1 • IEC 60529, IP20 Panel Enclosures Part No. 1420B7 1420C7 1420D7 1420E7 1420F7 1420G7 1420H7 1420E9 1420EM9 1420G9 1 A 16 20 20 24 30 30 36 24 24 30 B 12 16 20 20 20 24 24 20 24 24 C 7 7 7 7 7 7 7 9 9 9 Mounting Centers J F 17.50 9.50 21.50 10.00 21.50 14.00 25.50 14.00 31.50 14.00 31.50 18.00 37.50 18.00 25.50 14.00 25.50 18.00 31.50 18.00 • Additional inner panels...see page 438 • Lock kit for NEMA 1 enclosures (Part No. 1427LKN1)...see page 431 • Louvered ventilating plates ...see page 402 • Window kits...see page 449 • Padlock Adaptor...see page 435 Panel Size D E 14 10 18 14 18 18 22 18 28 18 28 22 34 22 22 18 22 22 28 22 H 5.88 5.88 5.88 5.88 5.88 5.88 5.88 7.88 7.88 7.88 O — — — — 6.16 6.16 7.16 — — 6.16 Ship Wt. lbs 26 39 48 53 67 79 90 60 71 84 12 gauge construction Technical references and CAD downloads available at www.hammondmfg.com 327 Accessories All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com 1420 Series Panel Enclosure Non-Ventilated - NEMA 1 Commercial Enclosures When A= 30 36 42 48 A 36 1420H9 36 1420P9 42 1420Q9 30 1420G12 36 1420P12 42 1420R121 42 1420S121 48 1420T121 30 1420G16 36 1420P16 1 12 gauge construction B 24 30 24 24 30 30 36 36 24 30 C 9 9 9 12 12 12 12 12 16 16 Mounting Centers J F 37.50 18.00 37.50 24.00 43.50 18.00 31.50 18.00 37.50 24.00 43.50 24.00 43.50 30.00 49.50 30.00 31.50 18.00 37.50 24.00 Technical references and CAD downloads available at www.hammondmfg.com Panel Size D E 34 22 34 28 40 22 28 22 34 28 40 28 40 34 46 34 28 22 34 28 H 7.88 7.88 7.88 10.88 10.88 10.88 10.88 10.88 14.88 14.88 O 7.16 7.16 8.16 6.16 7.16 8.16 8.16 9.16 6.16 7.16 Ship Wt. lbs 98 118 111 92 128 142 156 214 105 144 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 Panel Enclosures Part No. X= 18.00 22.00 26.00 30.00 USA: 716.630.7030 Data Subject to change without notice 328