www.hammondmfg.com 1422 Series Stainless Steel Two Door Floor Mount - NEMA 4X Continuous Hinge Corrosion Resistant Floormount Enclosures Application Construction Finish • Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. • Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem. • Formed 12 gauge 304 or 316 stainless steel. • Smooth, continuously welded seams without knockouts, cutouts or holes. • Body stiffeners are provided in the larger enclosures for extra rigidity. • Heavy duty stainless steel lifting eyebolts are provided with reinforcing support angles. • Center post is removable for easy installation of the inner panel. • Formed lip on door and top of enclosure opening exclude flowing liquids and contaminants. • Continuously hinged doors may be removed by pulling the stainless steel hinge pin. • Doors are secured with heavy duty stainless steel clamps. • Provision for padlocking. • 12" floor stands are welded to the enclosure. • Seamless poured-in place gasket. • Panel supports are provided for easy panel installation. • Collar studs are provided for mounting inner panels. • A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door. • A literature pocket is provided. • Cover and enclosure are natural stainless steel with a smooth brushed finish. • Removable inner panel is finished in white powder coating. Standards • UL 508 Type 3R, 4, 4X, and 12 • CSA Type 3R, 4, 4X, and 12 • Complies with • NEMA Type 3R, 4, 4X, 12 and 13 • JIC EGP-1-1967 • IEC 60529, IP66 Technical references and CAD downloads available at www.hammondmfg.com 95 Accessories • Breather kits...see page 400-401 • Door clamping hardware ...see page 429 • Door stop kits...see page 453 • Door support guide...see page 451 • Drip shield kits...see page 451 • Louvered ventilating plates ...see page 402 • Quick release clamp...see page 429 • Thermostats...see page 397 • Window kits...see page 449 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com 1422 Series Stainless Steel Two Door Floor Mount - NEMA 4X Continuous Hinge Corrosion Resistant Floormount Enclosures 304 S.S. Part Number 1422N4SSB12F 1422N4SSD12F 1422N4SSE12F 1422N4SSF12F 1422N4SSF24F 316 S.S. Part Number 1422N4S16B12F 1422N4S16D12F 1422N4S16E12F 1422N4S16F12F 1422N4S16F24F A 60.13 60.13 72.13 72.13 72.13 B 48.06 60.06 60.06 72.06 72.06 C 12.69 12.69 12.69 12.69 24.69 Body Gauge 12 12 12 12 12 Panel Gauge 10 10 10 10 10 Technical references and CAD downloads available at www.hammondmfg.com Panel Size D E 56 44 56 56 68 56 68 68 68 68 F 6.3 6.3 6.3 6.3 12.3 G 58.59 58.59 70.59 70.59 70.59 H 22 28 28 34 34 J 11.87 11.87 11.87 11.87 23.87 Ship Wt. lbs. 491 567 645 750 945 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice 96