www.hammondmfg.com 1414 N4 PH Series Enclosures - NEMA 4, 12, 13 Continuous Hinge, Clamped Cover Industrial Enclosures Junction Boxes Application Construction Finish • Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. • Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection. • Body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge steel. • Smooth, continuously welded seams without knockouts, cutouts or holes. • Welded brackets provide for enclosure mounting. • Continuous hinged cover is secured with stainless steel clamps and screws. • Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin. • Seamless poured-in place gasket. • All models larger than 4" x 4" include a removable 14 gauge inner panel. • Internal threaded weld studs are provided for mounting inner panels. • A bonding stud is provided on the door and a grounding stud is provided in the enclosure. • Cover and enclosure are phosphatized, finished in recoatable smooth ANSI 61 gray powder coating. • Removable inner panel is finished in white powder coating. Standards • UL 508 Type 3R, 4, 12 and 13 • CSA Type 3R, 4, 12 and 13 • Complies with • NEMA Type 3R, 4, 12 and 13 • JIC EGP-1-1967 unless marked1 • IEC 60529, IP66 Technical references and CAD downloads available at www.hammondmfg.com 11 Accessories • Additional inner panels...see page 436 • Breather kits...see page 400-401 • Door clamping hardware ...see page 429 • Filter fans...see page 371-384 • Heaters...see page 393-396 • Louvered ventilating plates ...see page 402 • Terminal kit assemblies ...see page 441 • Thermostats...see page 397 • Swing panel...see page 440 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com 1414 N4 PH Series Enclosures - NEMA 4, 12, 13 Continuous Hinge, Clamped Cover Industrial Enclosures Junction Boxes Part No. without Part No. Inner Panel — 1414N4PHA1 1 1414N4PHC 1414N4PHCLP1 1414N4PHG 1414N4PHGLP 1414N4PHE 1414N4PHELP 1414N4PHI 1414N4PHILP 1414N4PHI6 1414N4PHI6LP 1414N4PHK 1414N4PHKLP 1414N4PHL6 1414N4PHL6LP 1414N4PHM6 1414N4PHM6LP 1414N4PHO6 1414N4PHO6LP 1414N4PHM8 1414N4PHM8LP 1414N4PHO10 1414N4PHO10LP 1 A 4 6 8 6 10 10 12 12 14 16 14 16 B C 4 3.0 4 3.0 6 3.5 6 4.0 8 4.0 8 6.0 10 5.0 12 6.0 12 6.0 14 6.0 12 8.0 14 10.0 Panel Dimensions D E — — 4.88 2.88 6.75 4.88 4.88 4.88 8.75 6.88 8.75 6.88 10.75 8.88 10.75 10.88 12.75 10.88 14.75 12.88 12.75 10.88 14.75 12.88 F — 2.5 3.0 3.5 3.5 5.5 4.5 5.5 5.5 5.5 7.5 9.5 G 4.75 6.75 8.75 6.75 10.75 10.75 12.75 12.75 14.75 16.75 14.75 16.75 H 2 2 4 4 6 6 8 10 10 12 10 12 J 2.6 2.6 3.1 3.6 3.6 5.6 4.6 5.6 5.6 5.6 7.6 9.6 L 5.5 7.5 9.5 7.5 11.5 11.5 13.5 13.5 15.5 17.5 15.5 17.5 Cover Dimensions 4.31 6.31 8.31 6.31 10.31 10.31 12.31 12.31 14.31 16.31 14.31 16.31 4.31 4.31 6.31 6.31 8.31 8.31 10.31 12.31 12.31 14.31 12.31 14.31 T 3 3 5 5 7 7 9 11 11 13 11 13 V — .31 .25 .31 .25 .25 .25 .25 .25 .25 .25 .25 Y — .56 .63 .56 .63 .63 .63 .63 .63 .63 .63 .63 Ship Ship wt. wt. with w/o Panel Panel — 1 3 2 6 5 5 4 10 9 12 11 15 14 25 24 21 20 26 24 22 20 28 26 Does not meet JIC requirements Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice 12