www.hammondmfg.com Polyester Modular Enclosures - NEMA 4X PJ Accessories PJ Series Inner Panel • 14 gauge steel panels are finished in white baked powder coating. • Aluminum panels are 0.080” (2.03 mm) type 5052 H-32 aluminum, unpainted. A2420 and larger panels are 0.125". • Fiberglass inner panels are Finished in white • Hardware to mount inner panel is included with PJ Series Enclosures. Aluminum Part No. Fiberglass Part No. 14R0505 14R0705 14R0907 14R1109 14R1311 14R1513 P1868 P2068 18P2117 18P2121 18P2721 14A0505 14A0705 14A0907 14A1109 14A1311 14A1513 A1868 A2068 A2420 A2424 A3024 14F0505 14F0705 14F0907 14F1109 14F1311 14F1513 F1868 F2068 F2420 F2424 F3024 Moulded Polycarbonate Feet For PJU Series (sold in sets of 4) Part No. PJFPUWM6 PJFPUWM108 PJFPUWM1210 PJFPUWM1412 PJFPUWM1614 PJFPUWM1816 PJFPUWM2016 Part No. PJW4NUFS PJW4NULFS PJU Flange Fits 6x6, 8x6 10x8 12x10 14x12 16x14 18x16 20x16 0.125 0.125 0.125 0.125 0.187 0.187 0.187 0.250 0.250 0.250 0.250 Panel Length 4.88 6.75 8.75 10.75 12.75 14.75 16.88 18.44 21.00 21.00 27.00 Stainless Mounting Feet For PJ Series (sold in sets of 4) PJU Feet Fits 6x6 through 14x12 16x14 through 20x16 Part No. PJW4NFS PJW4NLS PJ/PJU Series Swing Panel Use with PJ Series Raised Lid Enclosures Part No. PJSP108 PJSP1210 PJSP1412 PJSP1614 PJSP1816 PJSP2016 PJSP2420 PJSP2424 PJSP3024 Width 4.88 4.88 6.88 8.88 10.88 12.88 14.88 14.44 17.00 21.00 21.00 For Use With PJ Series A B 6.10 6.10 8.00 6.13 10.14 8.26 12.14 10.26 14.13 12.25 16.28 14.40 18.40 16.40 20.00 16.00 24.00 20.00 24.00 24.00 30.00 24.00 Use with PJU Series Enclosures Panel Dimensions Height Width 9.50 7.50 11.50 9.50 13.50 11.50 15.13 13.00 17.25 15.38 18.88 14.94 23.25 19.38 23.38 23.25 29.25 23.38 Technical references and CAD downloads available at www.hammondmfg.com 304 SS PJ Feet Fits 6x6 through 20x16 24x20 through 30x24 Part No. PJSPU108 PJSPU1210 PJSPU1412 PJSPU1614 PJSPU1816 PJSPU2016 Panel Dimensions Height Width 9.64 7.87 11.64 9.86 13.64 11.86 15.64 13.86 17.90 15.99 19.65 15.55 • Hinged aluminum panel. • Mounts at front of enclosure body. • Field installed with no drilling required. All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 Junction Boxes Moulded Polycarbonate Flange For PJU Series (sold in Pairs) Fiberglass Thickness Corrosion Resistant Steel Part No. USA: 716.630.7030 Data Subject to change without notice 138