Catalog pages - Hammond Manufacturing

www.hammondmfg.com
1418 Series Freestanding Enclosures - NEMA 4, 12
Accessories
Inner Panels
Depth Panels
Industrial Enclosures
• Formed from 10 gauge or 12
gauge steel.
• All double door width panels are
10 gauge steel.
• Width panels are available in full or
half height.
• Depth panels are available in full
height only.
• Depth and width panels are
provided with all mounting hardware
and center support where required.
• Half panel can be mounted in the
top or bottom half of the enclosure.
• Finished in white.
Part No.
60FD14
72FD9
72FD14
72FD20
72FD26
90FD9
90FD14
90FD20
90FD26
Encl.
Encl.
Min Panel Panel
Height Depth
W
H
60
18
14
48
72
18
9
60
72
18
14
60
72
24
20
60
72
36
26
60
90
18
9
78
90
18
14
78
90
24
20
78
90
36
26
78
Side Mounted Panels for Single and Double
Door Enclosures
Freestanding Enclosures
Single Door Width Panels
Double Door Width Panels
Steel
Part No.
60TWFW
60TWHW
72WFW
72WHW
90YWFW
90YWHW
72XFW
72XHW
60TYFW
60TYHW
72YFW
72YHW
90YFW
90YHW
Steel
Part No.
60AWFW
60AWHW
72ZWFW
72ZWHW
72ZXFW
72ZXHW
72ZYFW
72ZYHW
90BWFW
90BWHW
90BYFW
90BYHW
Galv. Steel
Part No.
60TWFWG
60TWHWG
72WFWG
72WHWG
90YWFWG
90YWHWG
72XFWG
72XHWG
60TYFWG
60TYHWG
72YFWG
72YHWG
90YFWG
90YHWG
Description Enclosure Panel Size
Full Panel 60 x 24 48.00 x 20
Half Panel
24.87 x 20
Full Panel 72 x 24 60.00 x 20
Half Panel
30.87 x 20
Full Panel 90 x 24 78.00 x 20
Half Panel
39.87 x 20
Full Panel 72 x 30 60.00 x 26
Half Panel
30.87 x 26
Full Panel 60 x 36 48.00 x 32
Half Panel
24.87 x 32
Full Panel 72 x 36 60.00 x 32
Half Panel
30.87 x 32
Full Panel 90 x 36 78.00 x 32
Half Panel
39.87 x 32
Galv. Steel
Part No.
60AWFWG
60AWHWG
72ZWFWG
72ZWHWG
72ZXFWG
72ZXHWG
72ZYFWG
72ZYHWG
90BWFWG
90BWHWG
90BYFWG
90BYHWG
Description Enclosure Panel Size
Full Panel 60 x 48 48.00 x 44
Half Panel
24.88 x 44
Full Panel 72 x 48 60.00 x 44
Half Panel
30.88 x 44
Full Panel 72 x 60 60.00 x 56
Half Panel
30.88 x 56
Full Panel 72 x 72 60.00 x 68
Half Panel
30.88 x 68
Full Panel 90 x 48 78.00 x 44
Half Panel
39.88 x 44
Full Panel 90 x 72 78.00 x 68
Half Panel
39.88 x 68
1418 CS Series Center Panel Supports
•
•
•
•
Adapts panels, swing frames, and panel rails from single door enclosures so they can be used on double door enclosures.
Suitable for single or dual access double door enclosures.
Center panel support mounts into front to back mounting channels (top and bottom) found in two door enclosures.
Allows a combination of two 20" panels in a 48" wide enclosure, two 26" panels in a 60" wide enclosure, or two 32" panels
in a 72" wide enclosure.
• Width is adjustable from 1.91" to 2.34".
• Support may be positioned at any depth within the enclosure.
• Finished in white.
Part No.
1418ACS
1418ZCS
1418BCS
Enclosure Ht.
60
72
90
Technical references and CAD downloads available at www.hammondmfg.com
57
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
www.hammondmfg.com
1418 Series Freestanding Enclosures - NEMA 4, 12
Accessories
Panel Rails
Part No.
1418TFHP
1418THHP
1418WFHP
1418WHHP
1418XFHP
1418XHHP
1418YYFHP
1418YYHHP
Panel
Panel
Description Enclosure Width Height
U
V
Full Height
60 x 24
19
49.00 3.78 7.78
Half Height
26.25 3.59 7.59
Full Height
72 x 24
19
61.25 3.66 7.66
Half Height
31.50 3.97 7.67
Full Height
72 x 30
24
61.25 3.66 7.66
Half Height
31.50 3.97 7.67
Full Height
90 x 24
19
78.75 3.91 7.91
Half Height
40.25 4.09 8.09
Industrial Enclosures
• Provides 19" or 24" mounting
capability.
• Sold in pairs.
• Formed from 10 gauge steel.
• Drilled and tapped 10-32 to EIA
spacing of 0.5" - 0.63" - 0.63" - 0.5".
• Finished in white.
Swing Out Frames For 19" Rack Mounting
Part No.
1418SFYY
1418SFY
1418SFX
Freestanding Enclosures
• Formed from 10 gauge steel,
frames are drilled and tapped to
EIA requirements for mounting
standard 19" rack accessories.
• Designed for installation in 72"
and 90" high enclosures. The
swing frame pivots on 0.5" pins
within the enclosure for easy
access to the rear of rack mounted
equipment.
• The frame positions at any
depth within the enclosure and
is fastened in the closed position
with quarter turn fasteners.
• Swing frames may be mounted in
30" and 36" wide enclosures, or in
60" and 72" wide enclosures with an
optional center panel support...see
page 57.
• One or two frames may be
mounted in 30" and 36" wide
enclosures with dual access, and
1,2,3 or 4 frames may be mounted
in 60" and 72" wide dual access
enclosures.
• Finished in black.
Enclosure
Width
Width
Height
Single Door Double Door
A
B
C
D
E
87.86
33.72
4.28
78.5
75.31
90
36
72
69.86
33.72
4.28
60.5
57.81
72
36
72
69.86
27.72
4.28
60.5
57.81
72
30
60
Note: When using a swing out frame on a double door enclosure, a Center Panel Support
must also be used and ordered separately...see previous page.
Technical references and CAD downloads available at www.hammondmfg.com
Center
Support
1418 BCS
1418 ZCS
1418 ZCS
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
58