Data Sheet

www.hammondmfg.com
General Accessories
Panels
Panels for 1414, EJ and PJ Series Enclosures
Steel
Part No.
Fiberglass Aluminum Galv. Steel
Part No.
Part No. Part No.
14R0503
14R0505
14R0705
14R0707
14R0907
14R0909
14R1105
14R1109
14R1111
14R1307
14R1311
14R1509
14R1513
P1868
P2068
14A0503
14A0505
14A0705
14A0707
14A0907
14A0909
14A1105
14A1109
14A1111
14A1307
14A1311
14A1509
14A1513
A1868
A2068
14F0505
14F0705
14F0907
14F1109
14F1311
14F1513
F1868
F2068
14G0503
14G0505
14G0705
14G0707
14G0907
14G0909
14G1105
14G1109
14G1111
14G1307
14G1311
14G1509
14G1513
14G1715
14G1915
Panel
Length
4.88
4.88
6.75
6.75
8.75
8.75
10.75
10.75
10.75
12.75
12.75
14.75
14.75
16.88
18.44
Width
2.88
4.88
4.88
6.88
6.88
8.88
4.88
8.88
10.88
6.88
10.88
8.88
12.88
14.88
14.44
For Use with
For Use with
1414 and EJ
PJ Series
Height Width Height Width
6
4
—
—
6
6
7.04
7.04
8
6
8.94
7.06
8
8
—
—
10
8
11.08 9.20
10
10
—
—
12
6
—
—
12
10
13.08 11.20
12
12
—
—
14
8
—
—
14
12
15.08 13.20
16
10
—
—
16
14
17.22 15.34
—
—
19.34 17.34
—
—
20.94 16.94
Panels for 1418, 1422, 1447, and Wallmount Enclosures
•
•
•
•
•
Steel
Part No.
18P09091
18P09211
18P13091
18P13131
18P15151
18P17091
18P17131
18P17171
18P21091
18P21131
18P21172
18P21212
18P27092
18P27132
18P27172
18P27212
18P27273
18P33212
18P33273
18P33333
18P39212
18P39273
18P39333
18P45212
18P45273
18P45333
18P57333
18P69273
18P69333
1
Flat Panel
Panel
For Use With Enclosure
Galv. Steel
Part No.
Length
Width
Height
Width
18G09091
9
9
12
12
18G09211
9
21
12
24
18G13091
13
9
16
12
18G13131
13
13
16
16
18G15151
15
15
18
18
18G17091
17
9
20
12
18G17131
17
13
20
16
18G17171
17
17
20
20
18G21091
21
9
24
12
18G21131
21
13
24
16
18G21172
21
17
24
20
18G21212
21
21
24
24
18G27092
27
9
30
12
18G27132
27
13
30
16
18G27172
27
17
30
20
18G27212
27
21
30
24
18G27273
27
27
30
30
18G33212
33
21
36
24
18G33273
33
27
36
30
18G33333
33
33
36
36
18G39212
39
21
42
24
18G39273
39
27
42
30
18G39333
39
33
42
36
18G45212
45
21
48
24
18G45273
45
27
48
30
18G45333
45
33
48
36
18G57333
57
33
60
36
18G69273
69
27
72
30
18G69333
69
33
72
36
2
2 Formed Flanges 3 4 Formed Flanges
Technical references and CAD downloads available at www.hammondmfg.com
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
Panels
12 gauge steel finished in white.
12 gauge unpainted galvanized steel panels.
Larger panels have two or four formed flanges.
Some larger panels are 10 gauge.
Panels and mounting hardware are included
with 1418, 1447 and 1422 Series enclosures.
General Accessories
• 14 gauge steel panels are finished
in white.
• Aluminum panels are 0.080 type
5052 H-32 aluminum, unpainted.
• 14 gauge unpainted galvanized
steel.
• Fiberglass panels in NEMA sizes.
• Steel panels and mounting
hardware are included with 1414
Series enclosures.
• Galvanized panels and mounting
hardware are included with the EJ
Series enclosures.
• Mounting hardware is included with
PJ Series enclosures, order panel
separately.
USA: 716.630.7030
Data Subject to change without notice
436
www.hammondmfg.com
General Accessories
Panels
Panels for Eclipse Series Enclosures
General Accessories
Mild Steel
Part No.
EP12121
EP12241
EP16121
EP16161
EP16201
EP20121
EP20161
EP20202
EP20242
EP24121
EP24162
EP24202
EP24243
EP24303
EP24423
EP24483
EP30122
EP30163
EP30203
EP30243
EP30303
• Larger than standard NEMA panel
used in same
sized enclosure.
• 12gauge steel construction.
• Larger sizes have 2 or 4 formed
flanges for added strength.
• Slotted corner design for easier
mounting.
• Finished in white or unpainted
galvanized.
1
Flat Panel
Galvanized
Part No.
EPG12121
EPG12241
EPG16121
EPG16161
EPG16201
EPG20121
EPG20161
EPG20202
EPG20242
EPG24121
EPG24162
EPG24202
EPG24243
EPG24303
EPG24423
EPG24483
EPG30122
EPG30163
EPG30203
EPG30243
EPG30303
2
Size
D
E Gauge
10.2 10.2
12
10.2 22.2
12
14.2 10.2
12
14.2 14.2
12
14.2 18.2
12
18.2 10.2
12
18.2 14.2
12
18.2 18.2
12
18.2 22.2
12
22.2 10.2
12
22.2 14.2
12
22.2 18.2
12
22.2 22.2
12
22.2 28.2
12
22.2 40.2
12
22.2 46.2
12
28.2 10.2
12
28.2 14.2
12
28.2 18.2
12
28.2 22.2
12
28.2 28.2
12
2 Formed Flanges
3
Mild Steel
Part No.
EP30363
EP30423
EP30483
EP30603
EP36243
EP36303
EP36363
EP36423
EP36483
EP36603
EP42243
EP42303
EP42363
EP48243
EP48303
EP48363
EP48483
EP60363
EP72303
EP72363
Galvanized
Part No.
EPG30363
EPG30423
EPG30483
EPG30603
EPG36243
EPG36303
EPG36363
EPG36423
EPG36483
EPG36603
EPG42243
EPG42303
EPG42363
EPG48243
EPG48303
EPG48363
EPG48483
EPG60363
EPG72303
EPG72363
Size
D
E Gauge
28.2 34.2
12
28.2 40.2
12
28.2 46.2
12
28.2 58.2
12
34.2 22.2
12
34.2 28.2
12
34.2 34.2
12
34.2 40.2
12
34.2 46.2
12
34.2 58.2
12
40.2 22.2
12
40.2 28.2
12
40.2 34.2
12
46.2 22.2
12
46.2 28.2
12
46.2 34.2
12
46.2 46.2
12
58.2 34.2
12
70.2 28.2
12
70.2 34.2
12
4-Formed Flanges
Panels for 1420 Series Enclosures
Panels
• Panels and mounting hardware
are included with 1420 Series
enclosures.
• 12 gauge steel finished in white.
Part No.
20P14101
20P18141
20P18181
20P2218
20P2222
20P2818
20P2822
20P3422
20P3428
20P4022
20P4028
20P4034
20P4634
1
Flat panel
Panel
Length
14
18
18
22
22
28
28
34
34
40
40
40
46
Width
10
14
18
18
22
18
22
22
28
22
28
34
34
For Use With Enclosure
Height
Width
16
12
20
16
20
20
24
20
24
24
30
20
30
24
36
24
36
30
42
24
42
30
42
36
48
36
Width
38
44
56
56
68
For Use With Enclosure
Height
Width
54
42
60
48
60
60
72
60
72
72
Panels for 1422 Series Floormount Enclosures
• 22P5038 is formed from 12 gauge
steel, all others are 10 gauge steel.
• Panels and mounting hardware
are included with 1422 Series
enclosures.
• Finished in white.
Part No.
22P5038
22P5644
22P5656
22P6856
22P6868
Panel
Length
50
56
56
68
68
Technical references and CAD downloads available at www.hammondmfg.com
437
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
www.hammondmfg.com
General Accessories
Panels
Panels for N1A Series Enclosures
• 12 and 14 gauge steel finished in white.
• Panels and mounting hardware are included with N1A Series enclosures.
Panel
Length
13
13
13
17
17
17
21
21
21
Width
10.5
14.5
18.5
14.5
18.5
22.5
14.5
18.5
22.5
For Use With Enclosure
Height
Width
16
12
16
16
16
20
20
16
20
20
20
24
24
16
24
20
24
24
Panel
Part No.
AP30201
AP30241
AP30301
AP36241
AP36301
AP42241
AP4230
AP4236
AP4836
1
Length
26
26
26
32
32
38
38
38
44
Width
18.5
22.5
28.5
22.5
28.5
22.5
28.5
34.5
34.5
For Use With Enclosure
Height
Width
30
20
30
24
30
30
36
24
36
30
42
24
45
30
42
36
48
36
Flat Panel
General Accessories
Part No.
AP16121
AP16161
AP16201
AP20161
AP20201
AP20241
AP24161
AP24201
AP24241
Panels
Technical references and CAD downloads available at www.hammondmfg.com
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
438
www.hammondmfg.com
General Accessories
Panels
Perforated Inner Panels
• Made from 16 ga steel
• Accepts self tapping screws eliminating timely measurement, marking and
drilling of component mounting holes
• 1/8” dia holes on 1/4” staggered centers
• ANSI 61 gray powder finish
For NEMA 1 (N1A Series)
Part No.
General Accessories
AP1612PP
AP1616PP
AP1620PP
AP2016PP
AP2020PP
AP2024PP
AP2416PP
AP2420PP
AP2424PP
AP3020PP
AP3024PP
AP3030PP
AP3624PP
AP3630PP
AP4224PP
Panel
Length
13
13
13
17
17
17
21
21
21
26
26
26
32
32
38
Width
10.5
14.5
18.5
14.5
18.5
22.5
14.5
18.5
22.5
18.5
22.5
28.5
22.5
28.5
22.5
For Use With Enclosure
Height
Width
16
12
16
16
16
20
20
16
20
20
20
24
24
16
24
20
24
24
30
20
30
24
30
30
36
24
36
30
42
24
# Folds
0
0
0
0
0
0
0
0
4
4
4
4
4
4
4
Width
4.25
4.25
6.25
6.25
8.25
8.25
10.25
10.25
10.25
10.25
For Use With Enclosure
Height
Width
6
6
8
6
8
8
10
8
10
10
12
10
12
12
14
12
16
12
20
12
# Folds
0
0
0
0
0
0
0
0
0
0
For Use With Enclosure
Height
Width
16
12
16
16
18
18
20
16
20
20
24
20
24
24
30
24
30
30
36
24
36
30
36
36
# Folds
0
0
0
0
0
0
4
4
4
4
4
4
For NEMA 1 (N1J Series)
Part No.
Panels
N1JP66PP
N1JP86PP
N1JP88PP
N1JP108PP
N1JP1010PP
N1JP1210PP
N1JP1212PP
N1JP1412PP
N1JP1612PP
N1JP2012PP
Panel
Length
4.25
6.25
6.25
8.25
8.25
10.25
10.25
12.25
14.25
18.25
For NEMA 3R (C3R Series)
Part No.
18P1309PP
18P1313PP
18P1515PP
18P1713PP
18P1717PP
18P2117PP
18P2121PP
18P2721PP
18P2727PP
18P3321PP
18P3327PP
18P3333PP
Panel
Length
13
13
15
17
17
21
21
27
27
33
33
33
Technical references and CAD downloads available at www.hammondmfg.com
439
Width
9
13
15
13
17
17
21
21
27
21
27
33
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
www.hammondmfg.com
General Accessories
Panels
SPB2 shown
Swing Panel Kit
•
•
•
•
Part #:
For use with:
SPB1
Part #:
For use with:
SPB2
•
•
•
•
•
•
•
•
1414 Series where AxB is 8”x6” or larger
EJ Series where AxB is 8”x6” or larger
C3R-HCLO Series where AxB is 16x12 or smaller
Panel not included
1418 Wallmount Series, Eclipse Series
C3R-HCLO Series where AxB is 16x16 or larger
C3R-HCR Series where AxB is 16x12 or larger
Panel not included
General Accessories
SPB1 shown
Kits are used as accessory to standard Hammond panels (sold separately)
Allows panel to be mounted in front part of enclosure
Hinge permits access behind panel
Sealing washers preserve approval rating of enclosure
Panels
Technical references and CAD downloads available at www.hammondmfg.com
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
440
www.hammondmfg.com
General Accessories
Panel Accessories
Terminal Kits for 1414/EJ/PJ Series Enclosures
• Used to provide convenient mounting for terminal blocks in 1414 Series
enclosures and some sizes of "PJ" Series enclosures.
• Finished in white.
Bracket Assembly
• Each kit consists of two brackets.
• "C" channel construction provides easy alignment of terminal straps.
General Accessories
Terminal Strap
• 1.5" wide x 0.187" thick steel.
• Each strap includes spring locking hardware.
• Countersunk holes in straps provide extra terminal mounting space.
How to Order
Panels
• Each enclosure requires one
bracket assembly kit and the
required number of straps (Strap
Part No. corresponds to enclosure
dimension "A" and is mounted
parallel to same, Bracket Part
No. corresponds to enclosure
dimension "B" and is mounted
parallel to same).
• Example: For a PJ864L enclosure,
order one 14B6 bracket assembly
and a minimum of one 14B8
terminal strap kits. Additional
terminal strap kits will provide
additional mounting space.
Single
Strap
Part No.
14S8
14S10
14S12
14S14
14S16
1
L=
Length
6.19
8.19
10.19
12.19
14.19
Usable
Mounting
Space
4.30
6.30
8.30
10.30
12.30
Bracket
(Pair)
Part No.
14B6
14B8
14B10
14B12
14B14
Width
of Box
A
B
6
8
10
12
14
5
7
9
11
13
4.25
6.25
8.25
10.25
12.25
C
Fits PJ
Enclosure
1.55
1.55
2.79
2.79
2.79
PJ864...1
PJ1086...1
PJ12106...1
PJ14126...1
PJ16148...1
Compatible with all latch types
Technical references and CAD downloads available at www.hammondmfg.com
441
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
www.hammondmfg.com
General Accessories
Panel Accessories
Terminal Kit for 1418 Enclosures
• Used to provide convenient mounting for terminal blocks, pneumatic controls or
small relays in 1418 wallmount enclosures.
• Brackets may be installed horizontally or vertically in an enclosure if the size
corresponds to enclosure length or width.
• Finished in white.
Bracket Assembly
Terminal Strap
• 1.5" wide x 0.187" thick steel.
• Each strap includes spring locking hardware.
• Countersunk holes in straps provide extra terminal mounting space.
How To Order
Panels
• Each enclosure requires one
bracket assembly kit and the
required number of straps (order
separately).
• Determine if strap will be mounted
parallel to dimension "A" or "B".
• Choose the part number that
corresponds to enclosure
dimensions "A" or "B".
• When choosing a bracket assembly
to be parallel to dimension "B" in
an enclosure of 24", 30" or 36"
width, determine if a two or three
bracket assembly is required. When
enclosures are 48" or greater on "A"
dimension, 6 collar studs are used.
• Choose strap kit to correspond to
the other enclosure dimensions.
• Order the number of kits equal to
the number of straps required.
Bracket Assembly
Part No.
18B212
18B216
18B220
18B224
18B324
18B230
18B330
18B236
18B336
Number of
Brackets
2
2
2
2
3
2
3
2
3
Strap
Part No.
Length
8.5
12.5
16.5
20.5
20.5
26.5
26.5
32.5
32.5
B
7.25
11.25
15.25
19.25
19.25
25.25
25.25
31.25
31.25
Parallel Enclosure Dim
12
16
20
24
24
30
30
36
36
Technical references and CAD downloads available at www.hammondmfg.com
18S12
18S16
18S20
18S24
18S30
18S36
18S42
18S48
18S60
18S72
Length
9.5
13.5
17.5
21.5
27.5
33.5
39.5
45.5
57.5
69.5
Usable Mounting
Space (L)
7.6
11.6
15.6
19.6
25.6
31.6
37.6
43.6
55.6
67.6
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
General Accessories
• Each kit consists of two or three brackets per assembly.
• Brackets combined with collar stud length provide 3" minimum clearance from
the rear of the enclosure.
• "C" channel construction provides easy alignment of terminal straps.
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
442