CONTEMPRA 3 - SERIES ASSEMBLY INSTRUCTIONS FOR FLOORMOUNT 1/4 TURN DOOR LATCH AND HINGE BUL10123 REV. A PAGE 1 OF 2 ASSEMBLY INSTRUCTIONS: 4 A) Note: Doors (item 1) can be mounted on front and rear of rack. B) Mount door catch (item 2) and hinge body (item 3) as per instructions on page 2. 1 C3DS_Q SOLID DOOR LEFT HAND HINGE C) Position door so that mating part of hinge barrel on door aligns with the hinge barrels on body. Slip hinge pins (item 4) thru barrels and secure with a light tap from hammer. 3 C3F SERIES RACK D) Rotate 1/4 turn lock on door to open position then close and check that cam catches behind door catch. Adjust door catch if necessary. 2 DOOR CATCH 3 PLACES SEE SHEET 2 FOR MOUNTING DETAILS PARTS LIST ITEM No. DESCRIPTION SOLID DOOR (1/4 TURN) 1 DOOR CATCH 2 HINGE BODY 3 HINGE PIN 4 TOOL BOX 1/4 Slotted Head Screw Driver Hammer 1/4 TURN FASTENERS 3 PLACES QTY 1 3 3 3 HAMMOND MANUFACTURING TM ELECTRONICS GROUP visit our website @ www.hammondmfg.com CONTEMPRA 3 - SERIES ASSEMBLY INSTRUCTIONS FOR FLOORMOUNT 1/4 TURN DOOR LATCH AND HINGE BUL10123 REV. A PAGE 2 OF 2 ASSEMBLY INSTRUCTIONS: A) Mount door catch (item 2) to right side of rack frame as shown. Mount thru outside slots in frame using 1/4-20 screws and KEP nuts (item 7 & 8), B) Mount hinge body (item 3) to left side of rack frame as shown. Mount thru inside slots in frame using M6 screws (item 6), and tapped mounting plate (item 5). Gasket is between MTG plate and rack frame. RACK FRAME C) Doors are mounted using hinge pins provided. See page 1 for details 3 MOUNT HINGE BODY USING INSIDE SLOTS ON CORNER POST SEE STEP B 5 6 GASKET IS BETWEEN RACK FRAME AND TAPPED PLATE SEE STEP B 7 ITEM No. 1 2 3 4 5 6 7 8 PARTS LIST DESCRIPTION SOLID DOOR (1/4 TURN) DOOR CATCH HINGE BODY HINGE PIN (SHOWN ON PAGE 1) TAPPED MOUNTING PLATE WITH GASKET M6-1 X 12mm FLAT HD SCREW 1/4-20 KEP NUT 1/4-20 X 5/8 RD HD SCREW TOOL BOX 1/4 Slotted Head Screw Driver Hammer 3/8 or 7/16 Socket Wrench QTY 1 3 3 3 3 6 6 6 8 2 MOUNT DOOR CATCH USING OUTSIDE SLOTS ON RACK FRAME SEE STEP A