8 7 6 160.79 mm [6.330 in] 4 140.79 mm [5.543 in] 47.50 mm [1.870 in] A D 88.80 mm [3.496 in] (Inlay Length) 4.60 mm [0.181 in] 19.60 mm [0.772 in] B B 83.75 mm [3.297 in] (Inlay Width) 8.50 mm [0.335 in] 5.00 mm 4X [0.197 in 4X C 5 6.00 mm [0.236 in] 3 2 1 15.00 mm [0.591 in] D 2.00 mm [0.079 in] (Inlay Depth) 90.79 mm [3.574 in] 50.75 mm [1.998 in] 42.00 mm [1.654 in] (Inner Box Depth) A ENCLOSURE ASSEMBLY TOP VIEW 12.50 mm [0.492 in] (Inner Lid Depth) SECTION A-A END VIEW OF ASSEMBLY C Polycarbonate Version Only 62.50 mm [2.461 in] 6.00 mm [0.236 in] 6.50 mm [0.256 in] File #E65324 NEMA 4, 4X 2.25 mm 6.00 mm 6X SECTION B-B (SIDE VIEW OF ASSEMBLY) 119.95 mm [4.722 in] B [0.089 in 0.236 in 6X] 7.00 mm 107.00 mm [4.213 in] [0.276 in] 111.00 mm [4.370 in] 92.00 mm [3.622 in] 3.50 mm THRU 4X [0.138 in THRU 4X ] Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] NOTE Purchased assembly includes styled box, flanged lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) B Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) 81.80 mm [3.220 in] 77.00 mm [3.031 in] 42.70 mm [1.681 in] 89.95 mm [3.541 in] 92.80 mm [3.654 in] A 111.70 mm [4.397 in] 1555FF 81.00 mm [3.189 in] 1555FF Regular Enclosure 42.00 mm [1.654 in] 100.00 mm [3.937 in] 7 General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 1555FF42GY 1555F2F42GY ACCESSORIES Steel Inner Panels Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 1598ATS100 FLANGED LID INSIDE VIEW 5 4 SC1554 1555FF42 [0.089 in 0.236 in 4X ] 6 1555FFPL A 77.00 mm TYP. [3.031 in] 2.25 mm 6.00 mm 4X BOX INSIDE VIEW 8 68.00 mm TYP. [2.677 in] 3 2 1