PD - 96310C
IRLML9301TRPbF
VDS
-30
V
VGS Max
± 20
V
RDS(on) max
64
mΩ
103
mΩ
(@VGS = -10V)
RDS(on) max
(@VGS = -4.5V)
HEXFET® Power MOSFET
G 1
3 D
S
2
Micro3TM (SOT-23)
IRLML9301TRPbF
Application(s)
• System/Load Switch
Features and Benefits
Benefits
Features
Low RDS(on) ( ≤ 64mΩ)
Industry-standard pinout
Compatible with existing Surface Mount Techniques
RoHS compliant containing no lead, no bromide and no halogen
MSL1, Consumer qualification
Symbol
VDS
Lower switching losses
Multi-vendor compatibility
results in Easier manufacturing
Environmentally friendly
⇒
Increased reliability
Parameter
Max.
Units
-30
V
ID @ TA = 25°C
Drain-Source Voltage
Continuous Drain Current, VGS @ 10V
-3.6
ID @ TA = 70°C
Continuous Drain Current, VGS @ 10V
-2.9
IDM
Pulsed Drain Current
-15
PD @TA = 25°C
Maximum Power Dissipation
1.3
PD @TA = 70°C
Maximum Power Dissipation
0.8
Linear Derating Factor
0.01
VGS
Gate-to-Source Voltage
± 20
W/°C
V
TJ, TSTG
Junction and Storage Temperature Range
-55 to + 150
°C
A
W
Thermal Resistance
Symbol
Parameter
e
RθJA
Junction-to-Ambient
RθJA
Junction-to-Ambient (t<10s)
f
Typ.
Max.
–––
100
–––
99
Units
°C/W
ORDERING INFORMATION:
See detailed ordering and shipping information on the last page of this data sheet.
Notes through are on page 10
www.irf.com
1
02/09/12
IRLML9301TRPbF
Electric Characteristics @ TJ = 25°C (unless otherwise specified)
Symbol
V(BR)DSS
Parameter
Drain-to-Source Breakdown Voltage
ΔV(BR)DSS/ΔTJ Breakdown Voltage Temp. Coefficient
RDS(on)
Static Drain-to-Source On-Resistance
VGS(th)
Gate Threshold Voltage
IDSS
IGSS
Drain-to-Source Leakage Current
Min. Typ. Max. Units
-30
–––
–––
–––
0.02
–––
–––
51
64
–––
82
103
-1.3
–––
-2.4
–––
–––
1
–––
–––
150
V
Conditions
VGS = 0V, ID = -250μA
V/°C Reference to 25°C, ID = -1mA
mΩ
V
μA
VGS = -4.5V, ID
VDS = VGS, ID = -10μA
VDS =-24V, VGS = 0V
VDS = -24V, VGS = 0V, TJ = 125°C
Gate-to-Source Forward Leakage
–––
–––
-100
Gate-to-Source Reverse Leakage
–––
–––
100
RG
Internal Gate Resistance
–––
12
–––
Ω
gfs
Qg
Forward Transconductance
5.0
–––
–––
S
Total Gate Charge
–––
4.8
–––
Qgs
Gate-to-Source Charge
–––
1.2
–––
Qgd
Gate-to-Drain ("Miller") Charge
–––
2.5
–––
VGS = -4.5V
VDD =-15V
td(on)
Turn-On Delay Time
–––
9.6
–––
tr
Rise Time
–––
19
–––
td(off)
Turn-Off Delay Time
–––
16
–––
tf
Fall Time
–––
15
–––
Ciss
Input Capacitance
–––
388
–––
Coss
Output Capacitance
–––
93
–––
Crss
Reverse Transfer Capacitance
–––
65
–––
nA
d
= -2.9A d
VGS = -10V, ID = -3.6A
VGS = -20V
VGS = 20V
VDS = -10V, ID =-3.6A
ID = -3.6A
nC
ns
VDS =-15V
d
d
ID = -1A
RG = 6.8Ω
VGS = -4.5V
VGS = 0V
pF
VDS = -25V
ƒ = 1.0KHz
Source - Drain Ratings and Characteristics
Symbol
Parameter
IS
Continuous Source Current
ISM
(Body Diode)
Pulsed Source Current
c
Min. Typ. Max. Units
–––
–––
-1.3
A
–––
-15
VSD
(Body Diode)
Diode Forward Voltage
–––
–––
–––
-1.2
V
trr
Reverse Recovery Time
–––
14
21
ns
Qrr
Reverse Recovery Charge
–––
7.2
11
nC
2
Conditions
MOSFET symbol
showing the
integral reverse
D
G
S
p-n junction diode.
TJ = 25°C, IS = -1.3A, VGS = 0V
d
TJ = 25°C, VR = -24V, IF=-1.3A
di/dt = 100A/μs
d
www.irf.com
IRLML9301TRPbF
100
100
10
BOTTOM
TOP
-ID, Drain-to-Source Current (A)
-ID, Drain-to-Source Current (A)
TOP
VGS
-10V
-4.5V
-3.7V
-3.5V
-3.3V
-3.0V
-2.7V
-2.5V
1
0.1
-2.5V
10
BOTTOM
1
-2.5V
≤60μs PULSE WIDTH Tj = 25°C
≤60μs PULSE WIDTH Tj = 150°C
0.01
0.1
0.1
1
10
100
0.1
-V DS, Drain-to-Source Voltage (V)
1
10
100
-V DS, Drain-to-Source Voltage (V)
Fig 2. Typical Output Characteristics
Fig 1. Typical Output Characteristics
1.6
RDS(on) , Drain-to-Source On Resistance
(Normalized)
100
-I D, Drain-to-Source Current (A)
VGS
-10V
-4.5V
-3.7V
-3.5V
-3.3V
-3.0V
-2.7V
-2.5V
VDS = -15V
≤60μs PULSE WIDTH
10
T J = 150°C
T J = 25°C
1
ID = -3.6A
VGS = -10V
1.4
1.1
0.8
0.6
0.1
2.0
2.5
3.0
3.5
4.0
4.5
-V GS, Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
www.irf.com
5.0
-60 -40 -20 0
20 40 60 80 100 120 140 160
T J , Junction Temperature (°C)
Fig 4. Normalized On-Resistance
Vs. Temperature
3
IRLML9301TRPbF
VGS = 0V,
f = 1 KHZ
C iss = C gs + C gd, C ds SHORTED
C rss = C gd
C, Capacitance (pF)
C oss = C ds + C gd
1000
Ciss
Coss
Crss
100
14
ID= -3.6A
12
-V GS, Gate-to-Source Voltage (V)
10000
VDS= -24V
VDS= -15V
10
VDS= -6V
8
6
4
2
10
0
1
10
100
0
-VDS, Drain-to-Source Voltage (V)
6
8
10
12
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
100
-I D, Drain-to-Source Current (A)
100
-I SD, Reverse Drain Current (A)
4
QG, Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
10
T J = 150°C
T J = 25°C
1
OPERATION IN THIS AREA
LIMITED BY R DS(on)
10
100μsec
1msec
1
10msec
0.1
T A = 25°C
Tj = 150°C
Single Pulse
VGS = 0V
0.01
0.1
0.3
0.5
0.7
0.9
-VSD, Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode
Forward Voltage
4
2
1.1
0
1
10
100
-VDS, Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
www.irf.com
IRLML9301TRPbF
V GS
3.6
-ID, Drain Current (A)
RD
V DS
4.2
D.U.T.
RG
3
-
+
2.4
V DD
-V GS
Pulse Width ≤ 1 µs
1.8
Duty Factor ≤ 0.1 %
1.2
Fig 10a. Switching Time Test Circuit
0.6
td(on)
tr
t d(off)
tf
VGS
0
25
50
75
100
125
150
10%
T A , Ambient Temperature (°C)
Fig 9. Maximum Drain Current Vs.
Ambient Temperature
90%
VDS
Fig 10b. Switching Time Waveforms
Thermal Response ( Z thJA ) °C/W
1000
100
D = 0.50
0.20
0.10
0.05
0.02
0.01
10
1
0.1
0.01
Notes:
1. Duty Factor D = t1/t2
2. Peak Tj = P dm x Zthja + T A
SINGLE PULSE
( THERMAL RESPONSE )
0.001
1E-006
1E-005
0.0001
0.001
0.01
0.1
1
10
100
t1 , Rectangular Pulse Duration (sec)
Fig 11. Typical Effective Transient Thermal Impedance, Junction-to-Ambient
www.irf.com
5
180
RDS(on), Drain-to -Source On Resistance ( mΩ)
RDS(on), Drain-to -Source On Resistance (m Ω)
IRLML9301TRPbF
ID = -3.6A
140
100
T J = 125°C
60
T J = 25°C
20
2
4
6
8
10
12
14
16
18
20
500
400
300
200
Vgs = -4.5V
Vgs = -10V
100
0
0
5
10
15
20
25
30
35
-I D, Drain Current (A)
-V GS, Gate -to -Source Voltage (V)
Fig 13. Typical On-Resistance Vs. Drain
Current
Fig 12. Typical On-Resistance Vs. Gate
Voltage
Id
Vds
Vgs
L
DUT
0
Vgs(th)
Qgodr
Qgd
SS
Qgs2 Qgs1
Fig 14a. Gate Charge Waveform
6
20K
1K
VCC
Fig 14b. Gate Charge Test Circuit
www.irf.com
IRLML9301TRPbF
100
80
2.0
Power (W)
-V GS(th), Gate threshold Voltage (V)
2.5
1.5
ID = -10uA
ID = -25uA
ID = -250uA
1.0
0
25
50
75 100 125 150
TJ , Temperature ( °C )
Fig 15. Typical Threshold Voltage Vs.
Junction Temperature
www.irf.com
40
20
0.5
-75 -50 -25
60
0
1E-005 0.0001 0.001
0.01
0.1
1
10
Time (sec)
Fig 16. Typical Power Vs. Time
7
IRLML9301TRPbF
Micro3 (SOT-23) Package Outline
Dimensions are shown in millimeters (inches)
DIMENSIONS
A
6
5
SYMBOL
D
A
A1
A2
b
c
D
E
E1
e
e1
L
L1
L2
A
A2
3
6
C
E
E1
1
2
0.15 [0.006] M C B A
0.10 [0.004] C
A1
5
B
3X b
e
0.20 [0.008] M C B A
NOTES:
e1
H 4
L1
Recommended Footprint
c
L2
0.972
0.950
0.802
MILLIMETERS
INCHES
MIN
MAX
MIN
0.89
0.01
0.88
0.30
0.08
2.80
2.10
1.20
0.95
1.90
0.40
0.54
0.25
0
1.12
0.10
1.02
0.50
0.20
3.04
2.64
1.40
BSC
BSC
0.60
REF
BSC
8
MAX
0.0004 %6&
%6&
REF
BSC
0
8
2.742
1. DIMENSIONING & TOLERANCING PER ANSI Y14.5M-1994
2. DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES].
3. CONTROLLING DIMENSION: MILLIMETER.
4. DATUM PLANE H IS LOCATED AT THE MOLD PARTING LINE.
5. DATUM A AND B TO BE DETERMINED AT DATUM PLANE H.
6. DIMENSIONS D AND E1 ARE MEASURED AT DATUM PLANE H. DIMENSIONS DOES
NOT INCLUDE MOLD PROTRUSIONS OR INTERLEAD FLASH. MOLD PROTRUSIONS
OR INTERLEAD FLASH SHALL NOT EXCEED 0.25 MM [0.010 INCH] PER SIDE.
7. DIMENSION L IS THE LEAD LENGTH FOR SOLDERING TO A SUBSTRATE.
8. OUTLINE CONFORMS TO JEDEC OUTLINE TO-236 AB.
3X L
7
1.900
Micro3 (SOT-23/TO-236AB) Part Marking Information
Notes : This part marking information applies to devices produced after 02/26/2001
DATE CODE MARKING INSTRUCTIONS
DAT E CODE
PART NUMBER
LEAD F REE
WW = (1-26) IF PRECE DE D BY LAS T DIGIT OF CALE NDAR YEAR
YE AR
Cu WIRE
HALOGEN F REE
LOT CODE
X = PART NUMBER CODE REF ERENCE:
A = IRLML2402
B = IRLML2803
C = IRLML6302
D = IRLML5103
E = IRLML6402
F = IRLML6401
G = IRLML2502
H = IRLML5203
I = IRLML0030
J = IRLML2030
K = IRLML0100
L = IRLML0060
M = IRLML0040
N = IRLML2060
P = IRLML9301
R = IRLML9303
S = IRLML6244
T = IRLML6246
U = IRLML6344
V = IRLML6346
W = IRF ML8244
X = IRLML2244
Y = IRLML2246
Z = IRF ML9244
Note: A line above the work week
(as s hown here) indicates Lead - F ree.
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
Y
1
2
3
4
5
6
7
8
9
0
WORK
WE EK
W
01
02
03
04
A
B
C
D
24
25
26
X
Y
Z
WW = (27-52) IF PRE CEDED BY A LET T ER
YE AR
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
Y
A
B
C
D
E
F
G
H
J
K
WORK
WE EK
W
27
28
29
30
A
B
C
D
50
51
52
X
Y
Z
Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/
8
www.irf.com
IRLML9301TRPbF
Micro3™ (SOT-23)Tape & Reel Information
Dimensions are shown in millimeters (inches)
2.05 ( .080 )
1.95 ( .077 )
1.6 ( .062 )
1.5 ( .060 )
4.1 ( .161 )
3.9 ( .154 )
TR
FEED DIRECTION
1.85 ( .072 )
1.65 ( .065 )
3.55 ( .139 )
3.45 ( .136 )
4.1 ( .161 )
3.9 ( .154 )
1.32 ( .051 )
1.12 ( .045 )
8.3 ( .326 )
7.9 ( .312 )
0.35 ( .013 )
0.25 ( .010 )
1.1 ( .043 )
0.9 ( .036 )
178.00
( 7.008 )
MAX.
9.90 ( .390 )
8.40 ( .331 )
NOTES:
1. CONTROLLING DIMENSION : MILLIMETER.
2. OUTLINE CONFORMS TO EIA-481 & EIA-541.
Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/
www.irf.com
9
IRLML9301TRPbF
Orderable part number
Package Type
IRLML9301TRPbF
Micro3 (SOT-23)
Standard Pack
Form
Quantity
Tape and Reel
3000
Note
Qualification information†
Qualification level
Moisture Sensitivity Level
Cons umer††
(per JE DE C JE S D47F
Micro3 (SOT-23)
RoHS compliant
†††
guidelines )
MS L1
(per IPC/JE DE C J-S T D-020D††† )
Yes
Qualification standards can be found at International Rectifier’s web site
http://www.irf.com/product-info/reliability
Higher qualification ratings may be available should the user have such requirements.
Please contact your International Rectifier sales representative for further information:
http://www.irf.com/whoto-call/salesrep/
Applicable version of JEDEC standard at the time of product release.
Notes:
Repetitive rating; pulse width limited by max. junction temperature.
Pulse width ≤ 400μs; duty cycle ≤ 2%.
Surface mounted on 1 in square Cu board
Refer to application note #AN-994.
Data and specifications subject to change without notice.
IR WORLD HEADQUARTERS: 101N.Sepulveda blvd, El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.02/2012
10
www.irf.com