62074 Mii FIBER OPTIC GaAlAs LIGHT EMITTING DIODE OPTOELECTRONIC PRODUCTS DIVISION Features: Applications: • • • • • • • • Hermetically Sealed High Radiant Output for Fiber Optic Applications High Speed Spectrally Matched to the 61082 Series PIN Diode Computer Peripheral Link Tempest Applications Mobile Communications Local Area Networks DESCRIPTION The 62074 Light Emitting Diodes are designed to interface with multimode fibers from 50/125 to 200/300 microns. These LED’s convert electrical current into optical power that can be used in fiber optic communication. This series provides high irradiance and is mounted on a TO-46 header with metal protective cap. Available binned to customer specifications and/or screened to MIL-PRF-19500. ABSOLUTE MAXIMUM RATINGS 25°C FREE AIR TEMPERATURE UNLESS NOTED Storage Temperature............................................................................................................................................. -55°C to +150°C Operating Temperature ......................................................................................................................................... -40°C to +125°C Reverse Voltage( at 25°C case temperature) .........................................................................................................................1Vdc Forward Current-Continuous................................... ....(See note 1).................................................................................... 100mA Soldering Temperature (1/16 inch from case for 10 seconds)..........(See note 2) ............................................................... 240°C Transmission Rate at 100mA IF ....................................................................................................................................... 10Mbits/s NOTES: 1. Derate linearly to 125°C free-air temperature at the rate of 1.0 mA/°C. 2. RMA flux is recommended. Package Dimensions .131 [3.33] .121 [3.07] 0.030 [0.76] MAX Schematic Diagram CASE Ø0.100 [Ø2.54] NOM 3 LEADS 0.019 Ø [0.48] .016Ø [0.41] .220Ø [5.59] .208Ø [5.28] A .048 [1.22] .028 [0.71] CATHODE .185Ø [4.70] .182Ø [4.62] .046 [1.17] .036 [0.91] ANODE 45° K 0.500 [12.70] MIN ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 6 - 32 62074 FIBER OPTIC GaAlAs LIGHT-EMITTING DIODE ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. SYMBOL MIN TYP Output Power PARAMETER 62074-X01 62074-X02 PO 2.5 7.5 Coupled Power Out 62074-XX1 62074-X02 POC 150 50 Forward Voltage 62074-XXX VF Reverse Breakdown Voltage 62074-XXX BVR Reverse Current 62074-XXX Radiation Rise/Fall Time 62074-XXX IR tR Peak Wavelength 62074-XXX λP MAX 2.0 1 6 830 UNITS TEST CONDITIONS mW IF = 100mA µW IF = 100mA V IF = 100mA V IR = 10µA 10 µA ns 870 nm 10 NOTE 1 VR = 1.0V IF = 100mA Prebias @ 5 mA IF = 50mA NOTES: 1. Tested using a 100/140µm fiber with a 0.29nA. Actual coupled power may vary due to alignment procedures and/or receptable and fiber tolerances. RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX IF 75 100 Forward Current Transmission Rate 10 UNITS mA MBits/S SELECTION GUIDE PART NUMBER 62074-001 62074-101 62074-002 62074-102 GaAlAs Fiber Optic LED in TO-46 GaAlAs Fiber Optic LED in TO-46 GaAlAs Fiber Optic LED in TO-46 GaAlAs Fiber Optic LED in TO-46 PART DESCRIPTION package, commercial version package (-55° to +125°C) with 100% screening package, commercial version package (-55° to +125°C) with 100% screening PO Range 2.0-5.0 2.0-5.0 2.5-5.0 2.5-5.0 MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 6 - 33