62096 660 nm RED LIGHT EMITTING DIODE “PIGTAIL” (Proton Tolerant LED) MICROPAC OPTOELECTRONIC PRODUCTS DIVISION 09/22/03 Features: Applications: • • • • • • • • Hermetically sealed High output, 660nm Small package PC board mountable Incremental encoding Reflective sensors Position sensors Level sensors DESCRIPTION The 62096 is a P-N 660 nm Light Emitting Diode in a lensed coaxial package designed to be mounted in a single-clad printed circuit board. It is spectrally and mechanically matched to companion phototransistors and photodarlingtons with its narrow beam angle lens and small size which make it ideal for use in optical encoders, card reader arrays, etc. This device is also available with a lead attached to the case so that it may be connected without the use of a printed board. Available binned to customer specifications and/or screened to MIL-PRF-19500. ABSOLUTE MAXIMUM RATINGS Reverse Voltage (at 25°C case temperature) ............................…...................................................................................... 3Vdc Forward Current-Continuous (Note 1) ...............................................................................................................................100mA Storage Temperature………………………………………………………………………………………………….-65°C to +150°C Operating Temperature………………………………………………………………………………………………..-55°C to +100°C Soldering Temperature (10 seconds, 1/16” from case) ..................................................................................................... 240°C NOTES: 1. Derate linearly at the rate of 1.33 mA/°C above 25°C. Package Dimensions Ø0.020 [0.51] 1.100 [27.94] TYP. 0.114 [2.90] CATHODE Schematic Diagram A CATHODE OPTIONAL ANODE 0.020 [0.51] Ø0.063 [Ø1.60] Ø0.077 [Ø1.96] Ø0.095 [Ø2.41] 1.000 [25.40] 0.089 [2.26] K ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 62096 660nm RED LIGHT-EMITTING DIODE “PIGTAIL” (Proton Tolerant LED) 09/22/03 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER Output Power Forward Voltage SYMBOL MIN TYP PO 2.0 2.2 MAX BVR TEST CONDITIONS mW IF = 50mA V IF = 50mA V IH = 10µA 2.4 VF Reverse Breakdown Voltage UNITS 3 Radiation Rise Time tR 100 Peak Wavelength λP 660 nm θ 12 degrees Beam Angle ns IF(MAX) Forward Max Continuous Current NOTE 100 IF = 50mA 1 25°C Case mA NOTES: 1. Angle between half-intensity points. 2. Running this device at maximum rated forward current degrades life with out heat sinking. RECOMMENDED OPERATING CONDITIONS: PARAMETER Forward Current SYMBOL MIN MAX UNITS IF 50 100 mA SELECTION GUIDE PART NUMBER PART DESCRIPTION 62096-004 Commercial 62096-104 (-55° to +100°C) 100% Screened NOTE: Add L to end of dash number to signify addition of loop lead requirement. PO Range, min 2.0 mW 2.0 mW MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 2