66092-317 Mii LINEAR OPTOCOUPLER OPTOELECTRONIC PRODUCTS DIVISION Features: Applications: • • • • • • • • • • High Reliability Base lead eliminated for improved noise immunity Very high gain, high voltage transistor Stability over wide temperature range. +1kV electrical isolation Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66092-317 consists of a gallium arsenide infrared LED optically coupled to a monolithic silicon phototransistor detector. The have been designed and specified to meet the requirements of switchmode power supplies and other applications requiring very closely matched current transfer ratios (CTR), linearity and stable performance over the temperature range. The internal base-to-pin connection has been eliminated for improved noise immunity. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage...........................................................................................................................................................+1kV Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ............................30V Emitter-Collector Voltage............................................................................................................................................................7V Reverse Input Voltage ...............................................................................................................................................................5V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ......................................40mA Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) ..............................................................................1A Continuous Collector Current ................................................................................................................................................50mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ..................................300mW Storage Temperature.......................................................................................................................................... -65°C to +150°C Operating Free-Air Temperature Range ............................................................................................................. -55°C to +100°C Lead Solder Temperature (10 seconds max.) .................................................................................................................... 240°C Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C. 2. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C. Package Dimensions 0.155 [3.94] 0.185 [4.70] 0.040 [1.02]MAX Schematic Diagram 6 LEADS 0.016 [.41] 0.019 [.48] Ø0.200 [Ø5.08] 5 A C K E 3 5 6 0.370Ø [9.40] 0.336Ø [8.51] 0.305 [7.75] 0.335 [8.51] 3 7 0.045 [1.14] 0.029 [0.73] 2 1 0.500 [12.70] MIN 0.034 [0.864] 0.028 [0.711] 45° 7 B ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 E-MAIL: [email protected] www.micropac.com 3-27 1 2 66092-317 LINEAR OPTOCOUPLER ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER SYMBOL Input Diode Static Reverse Current MIN TYP MAX UNITS TEST CONDITIONS 100 µA VR = 5V IR -55°C +25°C +100°C Input Diode Static Forward Voltage VF 1.0 1.5 1.2 1.0 1.5 V V V IF = 10mA TYP MAX OUTPUT TRANSISTOR TA = 25°C unless otherwise specified. SYMBOL MIN UNITS TEST CONDITIONS Collector-Emitter Breakdown Voltage PARAMETER V(BR)CEO 40 V IC = 1mA, IB = 0, IF = 0 Emitter-Collector Breakdown Voltage V(BR)ECO 7 V IC= 0mA, IE = 100µA, IF = 0 +25°C Collector-Emitter Dark Current +100°C ICEO1 100 nA VCE = 10V, IF = 0mA ICEO2 100 µA VCE = 10V, IF = 0mA COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER On State Collector Current SYMBOL MIN TYP MAX UNITS TEST CONDITIONS IC(ON) 13.6 17 20.4 mA VCE = 4V, IF = 10mA IC(ON) 6.8 mA VCE = 5V, IF = 10mA IC(ON) 10.2 mA VCE = 5V, IB = 0, IF = 10mA V IF = 5mA, IC = 0.5mA, IB = 0 Ω VIN-OUT = 1kV, tw = 100µs, ta = +25°C On State Collector Current ta = -55°C On State Collector Current ta = +100°C Collector-Emitter Saturation Voltage VCE(SAT) Input to Output Resistance RIO 0.15 0.4 11 10 duty cycle <1% Rise Time (10-90%) tr 3.2 VCE = 10V, IF = 2mA, RL= 100Ω Fall Time (10-90%) tf 4.7 VCE = 10V, IF = 2mA, RL= 100Ω Turn On Time tON 7.5 20 µs VCE = 10V, IF = 2mA, RL= 100Ω Turn Off Time tOFF 5.7 20 µs VCE = 10V, IF = 2mA, RL= 100Ω RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 100 µA Input Current, High Level IFH 1 2 mA Supply Voltage VCC 5.0 20 V TA -55 125 °C Operating Temperature UNITS MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 E-MAIL: [email protected] www.micropac.com 3-27