66083 Mii SINGLE CHANNEL OPTOCOUPLERS OPTOELECTRONIC PRODUCTS DIVISION REVISION A 12/29/00 Features: Applications: • • • • • • • • • • Collector is electrically isolated from the case. Overall current gain...1.5 typical (-X03) Rugged package High gain, high voltage transistor +1kV electrical isolation Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66083 series optocoupler consist of a Gallium Aluminum Arsenide (GaAlAs) infrared LED and a high gain N-P-N silicon phototransistor packaged in a hermetically sealed LCC case. The 66083 can be tested to customer specifications, as well as to MIL-PRF-19500 JAN, JANS, JANTX, and JANTXV quality levels. *ABSOLUTE MAXIMUM RATINGS Input to Output Voltage............................................................................................................................................................. ±1kV Emitter-Collector Voltage..............................................................................................................................................................5V Collector-Emitter Voltage............................................................................................................................................................35V Reverse Input Voltage .................................................................................................................................................................2V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ....................................... 40mA Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) .................................................................................1A Continuous Collector Current ................................................................................................................................................. 50mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ................................... 300mW Storage Temperature............................................................................................................................................. -65°C to +125°C Operating Free-Air Temperature Range ............................................................................................................... -55°C to +125°C Lead Solder Temperature (1/16” (1.6mm) from case for 10 seconds) ..................................................................................240°C Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C. 2. Derate linearly to 125°C free-air temperature at the rate of 5 mW/°C. Package Dimensions * JEDEC registered data 0.225 [5.72] 0.215 [5.46] 0.075 [1.91] 0.061 [1.55] 0.155 [1.40] 0.145 [3.68] PIN 1 IDENTIFIER 0.048 [1.22] 2 0.032 [0.81] 1 0.028 [0.17] 0.022 [0.56] 3 4 Schematic Diagram 3 A C 1 3 PL E 2 0.055 [1.40] 0.045 [1.14] K 0.088 [2.24] 0.072 [1.83] ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 10 4 66083 SINGLE CHANNEL OPTOCOUPLERS REVISION A 12/29/00 TA = 25°C Unless otherwise specified *ELECTRICAL CHARACTERISTICS INPUT LED PARAMETER SYMBOL MIN MAX UNITS Input Diode Static Reverse Current IR -55°C +25°C +100°C Input Diode Static Forward Voltage µA VR = 2V 1.5 1.3 1.2 V IF = 10mA MAX 1 0.8 0.7 VF *OUTPUT TRANSISTOR TA = 25°C Unless otherwise specified PARAMETER SYMBOL MIN TEST CONDITIONS 100 UNITS TEST CONDITIONS Collector-Emitter Breakdown Voltage V(BR)CEO 35 V IC = 1mA, IB = 0, IF = 0 Emitter-Base Breakdown Voltage V(BR)EBO 5 V IC = 0, IE = 100µA, IF = 0 *COUPLED CHARACTERISTICS PARAMETER SYMBOL MIN UNITS TEST CONDITIONS -X01 -X02 -X03 IC(ON) 0.15 0.2 0.4 mA VCE = 5V, IF = 2mA On State Collector Current -X01 -X02 -X03 IC(ON) 2.5 6 10 mA VCE = 5V, IF = 10mA X01 X02 XO3 IC(ON) 1 2.5 4 MA VCE = 5V, IF = 10mA X01 X02 X03 IC(ON) 1 2.5 4 mA VCE = 5V, IF = 10mA On State Collector Current -55°C +100o C NOTE TA = 25°C Unless otherwise specified On State Collector Current On State Collector Current NOTE MAX NOTE Off State Collector Current +25°C IC(OFF) 100 nA VCE = 20V, IB = 0, IF = 0mA Off State Collector Current +100°C IC(OFF) 100 µA VCE = 20V, IB = 0, IF = 0mA VCE(SAT) VCE(SAT) VCE(SAT) 0.3 0.3 0.3 V V V IC = 2.5mA, IB = 0, IF = 20mA IC = 5 mA, IB = 0, IF = 20mA IC = 10 mA, IB = 0, IF = 20mA VIN-OUT = 1kV 1 1 Collector-Emitter Saturation Voltage -X01 -X02 -X03 11 Input to Output Resistance RI-O Input to Output Capacitance CI-O 5 pF F = 1MHz, VIN-OUT = 1kV -X01 -X02 -X03 tr tr tr 15 15 20 µs VCC = 10V, IF = 10mA, RL = 100Ω X01 X02 X03 tf tf tf 15 15 20 µs Rise Time Fall Time 10 µs µs VCC =10V, IF = 10mA, RL = 100Ω µs µs NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 100 µA Input Current, High Level IFH 2 10 mA VCE 5 10 V Supply Voltage UNITS SELECTION GUIDE PART NUMBER 66083-001 66083-002 66083-003 66083-101 66083-102 66083-103 66083-201 66083-202 66083-203 PART DESCRIPTION -X01 Optocoupler, 66083 Commercial -X02 Optocoupler, 66083 Commercial -X03 Optocoupler, 66083 Commercial -X01 Optocoupler, 66083TX Screening level -X02 Optocoupler, 66083TX Screening level -X03 Optocoupler, 66083TX Screening level -X01 Optocoupler, 66083TXV Screening level -X02 Optocoupler, 66083TXV Screening level -X03 Optocoupler, 66083TXV Screening level MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3 - 11