3N261 3N262 3N263 66133 REVISION A Mii SINGLE CHANNEL OPTOCOUPLERS (REPLACEMENT FOR TIL 120) OPTOELECTRONIC PRODUCTS DIVISION 9/15/00 Features: Applications: • • • • • • • • • • Electrically similar to 4N47, 4N48, 4N49 Base lead eliminated for improved noise immunity Rugged package +1kV electrical isolation Stability over wide temperature range Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66133 single channel optocoupler consists of a Gallium Arsenide infrared LED and a high gain N-P-N silicon phototransistor packaged in a hermetically sealed metal case. The 3N261, 3N262 and 3N263’s can be tested to customer specifications, as well as to MIL-PRF-19500 using Micropac’s extensive in-house test facilities. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage............................................................................................................................................................. 1kV Emitter-Collector Voltage............................................................................................................................................................7V Collector-Emitter Voltage (VCEO, IF = 0) .....................................................................................................................................40V Reverse Input Voltage ...............................................................................................................................................................2V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ......................................40mA Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) ...............................................................................1A Continuous Collector Current ................................................................................................................................................20mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) .................................275mW Storage Temperature........................................................................................................................................... -65°C to +150°C Operating Free-Air Temperature Range. ............................................................................................................ -55°C to +100°C Lead Solder Temperature (10 seconds max.) ..................................................................................................................... 240°C Notes: 1. Derate linearly to 100°C free-air temperature at the rate of 1.14 mA/°C above 65°C. 2. Derate linearly to 100°C free-air temperature at the rate of 7.8 mW/°C above 65°C. Package Dimensions Schematic Diagram 0.019 [0.48] 0.016 [0.41] .230 [5.84] .209 [5.31] Ø 4 LEADS GOLD PLATED KOVAR 0.040 [1.02]MAX .195 [4.95] .178 [4.52] 0.210 [5.33] 170 [4.32] 0.500 [12.70] MIN 2 3 1 4 4 3 2 1 1.00Ø [2.54] SEE NOTE 1 BOTTOM VIEW THE COLLECTOR IS IN ELECTRICAL CONTACT WITH THE CASE NOTE 1: THIS DIMENSION IS CONTROLLED AT THE HOUSING SURFACE. DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3-3 66133 REVISION A 3N261 3N262 3N263 SINGLE CHANNEL OPTOCOUPLERS, SIMILAR TO 4N47/4N48/4N49 9/15/00 ELECTRICAL CHARACTERISTICS TA = 25°C PARAMETER SYMBOL Input Diode Static Reverse Current Input Diode Static Forward Voltage MIN 3N261 3N262 3N263 IR 3N261 3N262 3N263 VF 0.8 0.8 0.8 TYP MAX UNITS 100 100 100 µA TEST CONDITIONS VR = 2V 1.5 1.5 1.5 V IF = 10mA MAX OUTPUT TRANSISTOR TA = 25°C SYMBOL MIN UNITS TEST CONDITIONS Collector-Emitter Breakdown Voltage PARAMETER V(BR)CEO 40 V IC = 1mA, IF = 0 Emitter-Collector Breakdown Voltage V(BR)ECO 7 V IE = 100µA, IF = 0 100 nA VCE = 20V, IF = 0mA MAX Collector Dark Current TYP ID COUPLED CHARACTERISTICS TA = 25°C SYMBOL MIN UNITS TEST CONDITIONS On State Collector Current PARAMETER 3N261 IC(ON) 0.5 mA VCE = 5V, IF = 1mA On State Collector Current 3N262 IC(ON) 1 mA VCE = 5V, IF = 1mA On State Collector Current 3N263 IC(ON) 2 mA VCE = 5V, IF = 1mA Collector-Emitter Saturation Voltage 3N261 3N262 3N263 VCE(SAT) VCE(SAT) VCE(SAT) 0.3 0.3 0.3 V V V IF = 2mA, IC = 0.5mA IF = 2mA, IC = 1mA IF = 2mA, IC = 2mA Rise Time 3N261 3N262 3N263 tr tr tr 10 10 15 20 20 25 µs 3N261 3N262 3N263 tf tf tf 10 10 15 20 20 25 µs Fall Time TYP µs VCC = 10V, IF = 5mA, RL= 100Ω µs µs VCC = 10V, IF = 5mA, RL = 100Ω µs RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX UNITS Input Current, Low Level IFL 0 1 µA Input Current, High Level IFH 10 20 mA Supply Voltage VCE 5 10 V SELECTION GUIDE PART NUMBER 66133-001 66133-002 66133-003 66133-101 66133-102 66133-103 PART DESCRIPTION 3N261, Single Channel Optocoupler, Commercial 3N262, Single Channel Optocoupler, Commercial 3N263, Single Channel Optocoupler, Commercial 3N261, Single Channel Optocoupler with JTX screening 3N262, Single Channel Optocoupler with JTX screening 3N263, Single Channel Optocoupler with JTX screening MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: [email protected] 3-4