InGaAs multichannel detector head C10854 Near infrared line camera (Line rate: 31.25 kHz) The C10854 is a multichannel detector head suitable for applications where high-speed response is required, such as SDOCT (spectral domain-optical coherence tomography) and sorting machines. The HAMAMATSU G10768 series InGaAs nearinfrared linear image sensor (sold separately) can be easily installed in the C10854. The C10854 comes with application software (DCam-CL) that runs on Windows 7 (32-bit / 64-bit version) and controls the C10854 from a PC. The application software also includes a function library (SSDic.dll) for the C10854, allowing you to develop your own software by using Microsoft Visual Studio 2008 or later, or National Instruments IMAQ developmental environment. Features Applications High-speed operation: 5 MHz Foreign object screening Line rate: 31.25 kHz OCT (optical coherence tomography) 1024 pixels (128 pixels × 8 ports) Near infrared spectroscopy Supports CameraLink The table below shows InGaAs linear image sensors applicable for the C10854 (sold separately). Type no. G10768-1024D G10768-1024DB Spectral response range (μm) 0.9 to 1.7 InGaAs linear image sensor Pixel size Number of pixels (μm) 25 × 100 1024 25 × 25 Effective photosensitive area length (mm) 25.6 Specifications (Unless otherwise noted, Typ. Ta=25 °C) Parameter Condition Clock frequency Line scan rate Line readout time Data transfer time Total transfer time A/D conversion resolution Video output Interface Supply voltage ±5%, 1 A max. Operating temperature No codensation Storage temperature Dimension Excluding projecting parts Weight Specification 5 31.25 32 17.07 49.07 16 16-bit, CameraLink (Base configuration) RS-232C +5 0 to +50 -20 to +70 69.5 (L) × 80 (W) × 65 (H) 330 www.hamamatsu.com Unit MHz kHz μs μs μs bit Vdc °C °C mm g 1 InGaAs multichannel detector head C10854 Spectral response (G10768 series) (Typ.) 1.2 50 °C Photo sensitivity (A/W) 1.0 0.8 0 °C 0.6 25 °C 0.4 0.2 0 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Wavelength (μm) KMIRB0042EB Connection example Pulse generator, etc. Laser Mechanical shutter Power supply (DC+5 V) InGaAs multichannel detector head C10854 Serial communication CameraLink PC + Frame grabber board KACCC0469EA 2 InGaAs multichannel detector head C10854 Functions Operation mode Data acquisition mode Parameter “Standby” mode (white LED lighting) “Date transfer” mode (LED-green, aqua, blue, purple) Internal synchronous mode (“Internal” mode) External synchronous edge mode (“External edge 1” mode) External synchronous level mode (“External level 1” mode) External synchronous edge mode (“External edge 2” mode) External synchronous level mode (“External level 2” mode) External synchronous mode 2 (“External gating” mode) Offset adjustment Pulse output setting Selection of conversion efficiency* Specifications It is standby state. At this moment, the InGaAs linear image sensor is sweeping out dark current, by performing so called dummy scan operation. The multichannel detector head transfers data to PC. Color of LED changes depending upon the data acquisition mode. Data is acquired on the basis of the trigger timing generated by application software. 1 Data is acquired in synchronization with the external trigger signal input from the built-in BNC connector. Signal integration starts after an external trigger 1 signal is input and any dummy operation ends. 2 Data is acquired in synchronization with the external trigger signal input from the built-in BNC connector. Signal integration starts after an external trigger 2 signal is input. Data is acquired in synchronization with the trigger timing from the application software and the external trigger signal input from the built-in BNC connector. The offset value can be varied in the range of [0 to 511] with the step of 1. Default value is “10”. It is possible to perform the timing setup of the "pulse output signal (PULSE OUT)" outputted from the BNC connector used as PULSE_OUT of the multichannel detector head. Conversion efficiency can be selected from 4 different levels. * Refer to the datasheet "InGaAs linear image sensors G10768 series". Timing chart Internal synchronous mode (“Internal” mode) Trigger in (soft ware) Integration time Low level period Exposure signal RESET Sensor 1 cycle operation Data acquisition period A/D conversion Data transfer period FVAL/LVAL/DVAL Data transfer KACCC0536EA 3 InGaAs multichannel detector head C10854 External synchronous edge mode 1 (“External edge 1” mode) Trigger in (BNC) Integration time Exposure signal Low level period RESET Sensor 1 cycle operation Data acquisition period A/D conversion Data transfer period FVAL/LVAL/DVAL Data transfer KACCC0537EA External synchronous edge mode 2 (“External edge 2” mode) Trigger in (BNC) Integration time Exposure signal Low level retaining Low level period RESET Dummy scan Sensor 1 cycle operation Data acquisition period A/D conversion Data transfer period FVAL/LVAL/DVAL Data transfer Note: The input interval of external triggers must be longer than the integration time + low level period. KACCC0538EA External synchronous level mode 1 (“External level 1” mode) Trigger in (BNC) Integration time Exposure signal Low level period RESET Sensor 1 cycle operation Data acquisition period A/D conversion Data transfer period FVAL/LVAL/DVAL Data transfer KACCC0539EA 4 InGaAs multichannel detector head C10854 External synchronous level mode 2 (“External level 2” mode) Trigger in (BNC) Integration time Exposure signal Low level period Low level retaining RESET Dummy scan Data acquisition period Sensor 1 cycle operation A/D conversion Data transfer period FVAL/LVAL/DVAL Data transfer Note: The input interval of external triggers must be longer than the integration time + low level period. The pulse width of external triggers must be longer than the low level period. KACCC0540EA External synchronous gate mode (“External gating” mode) Trigger in (BNC) Integration time Low level period Exposure signal RESET Data acquisition period Sensor 1 cycle operation A/D conversion Data transfer period FVAL/LVAL/DVAL Data transfer KACCC0541EA 5 InGaAs multichannel detector head C10854 Dimensional outline (unit: mm) BNC connector for external signal input Focal plane 80 ± 0.1 BNC connector for pulse output 69.5 ± 0.4 55 ± 0.1 65 ± 0.1 50 ± 0.1 Connector for power supply (0.95) Connector for CameraLink (2 ×) ϕ3 H7 depth 3 35 ± 0.4 (4 ×) M3 depth 3 Connector for RS-232C 10 ± 0.1 10 ± 0.1 M6 depth 5 (2 ×) 1/4-20UNC depth 5 KACCA0238EB Pin connections Connector for “POWER” [HIROSE RM12BRD-6PH (71)] 1 Pin no. 1 2 3 4 5 6 6 2 5 3 4 Signal +5 V +5 V +5 V GND GND GND KACCC0470EA Accessories ● Power cable (1.5 m) ● Application software (DCam-CL) ● Function library (SSDic.dll) NOTE: A National Instruments frame grabber board and NI-IMAQ are required to use the supplied application software (DCam-CL) and function library (SSDic.dll). Operation of the following frame grabber boards has been verified. Manufacturer National Instruments Model No. PCIe-1427 PCIe-1429 PCIe-1430 PCIe-1433 Supported OS Driver Windows® 7 National Instruments tool (supplied with NI-IMAQ) 6 InGaAs multichannel detector head C10854 Option (sold separately) ● F-mount adapter A11544 Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Notice Information described in this material is current as of August, 2014. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KACC1154E07 Aug. 2014 DN 7