Driver circuits for CCD image sensor
C11287
C11288
Driver circuit for CCD image sensor
(S10420/S11071/S11510 series)
The C11287 and C11288 are driver circuits designed for HAMAMATSU CCD image sensor S10420/S11071/S11510 series. The
C11287 and C11288 can be used in spectrometer when combined with the S10420/S11071/S11510 series.
The C11287 and C11288 hold a CCD driver circuit, analog video signal processing circuit (14-bit A/D converter), timing generator, control circuit and power supply. The C11287 and C11288 convert analog video signals from a CCD into digital signals and
outputs them. The USB connector (USB 2.0) provided as a standard feature easily connects to a PC for the C11287 and C11288
control and data acquisition. No additional power supply for the C11287 is needed since power is supplied from the PC through
the USB connector. The C11287 and C11288 also have a BNC connector for external trigger input and pulse output. The C11287
and C11288 are compact, lightweight and very easy to handle.
Application software (DCam-USB) that comes with the C11287 and C11288 allows easy operation from a PC running on Windows
2000/XP. A function library (DCamUSB.DDL) included with the application software helps you to develop your own software. This
software is available with DLL to help you develop your own software programs under various developmental environments.
Features
Applications
Built-in 14-bit A/D converter
Spectrometer
Adjustable offset
Control of CCD image sensor
(S10420/S11071/S11510 series) and data aquisition
Adjustable gain
Interface of computer: USB 2.0
Power supply: USB bus power (C11287)
DC+5 V (C11288)
The table below shows CCD image sensor applicable for the C11287/C11288.
Since the C11287 and C11288 do not include a CCD image sensor, so select the desired sensor and order it separately.
Type no.
C11287
C11288
Type no.
S10420-1004-01
S10420-1006-01
S10420-1104-01
S10420-1106-01
S11510-1006
S11510-1106
S11071-1004
S11071-1006
S11071-1104
S11071-1106
Number of pixels
1044
1044
2068
2068
1044
2068
1044
1044
2068
2068
×
×
×
×
×
×
×
×
×
×
22
70
22
70
70
70
22
70
22
70
CCD area image sensor
Number of active
pixels
1024 × 16
1024 × 64
2048 × 16
2048 × 64
1024 × 64
2048 × 64
1024 × 16
1024 × 64
2048 × 16
2048 × 64
www.hamamatsu.com
Pixel size
(μm)
14 × 14
14 × 14
Active area
[mm (H) × mm (V)]
14.336 × 0.224
14.336 × 0.896
28.672 × 0.224
28.672 × 0.896
14.336 × 0.896
28.672 × 0.896
14.336 × 0.224
14.336 × 0.896
28.672 × 0.224
28.672 × 0.896
1
Driver circuits for CCD image sensor
C11287, C11288
Specifications (Typ. Ta=25 °C, unless otherwise noted)
C11287
Parameter
Condition
Scanning
Frame readout time
Data transfer time
Total transfer time
A/D conversion resolution 16383ADU
Conversion gain
Readout noise
Dynamic range
Interface
C11287 360 mA typ.
Supply voltage
C11288 650 mA typ.
Storage temperature
Operating temperature
Operating humidity
No condensation
Dimension
Weight
C11288
S10420S10420S10420- 1006-01, S10420- 1106-01, S110711004-01 S11510- 1104-01 S115101004
1000
1106
250 k
4.8
5.7
8.9
9.8
0.62
4.3
4.3
8.4
8.4
0.22
4.8
5.7
8.9
9.8
0.84
14
12.2
3
5461
USB 2.0
80 (H) × 70 (W)
Approx. 60
S110711006
S110711104
S110711106
4M
1.58
0.22
1.80
Unit
Hz
0.79
0.44
1.23
7
2730
1.75
0.44
2.19
ms
bit
e-/ADU
ADU
-
DC + 4.5 to 5.5
V
-20 to + 70
0 to + 50
70 max.
°C
°C
%
mm
g
80 (H) × 80 (W)
Approx. 65
Functions
Parameter
Suspend mode (LED-off)
Operating Standby mode (LED-white)
mode setting Data transfer mode
(LED-green, aqua, blue)
Internal synchronous mode
("INT" mode)
Selectable
External synchronous mode 1
data
("EXT.EDGE" mode)
acquisition
modes
External synchronous mode 2
("EXT.LEVEL" mode)
Gain adjustment
Offset adjustment
Pulse output signal setting
Specification
The power supply is turned off.
It is Standby state, in which the data acquisition is possible.
In this mode, the driver circuit sends the data to PC.
Data is acquired on the basis of the trigger timing generated by application software.
Data is acquired in synchronization with the external trigger signal input from the
BNC connector. In synchronization with an edge of the external trigger signal, data is
accumulated for the set integration time and is then output.
Data is acquired in synchronization with the external trigger signal input from the BNC
connector. Data is accumulated for a period equal to the pulse width of the external
trigger signal and is then output.
The gain value can be varied in the range of “1 to 10” with the step of 1. Default value is
"1".
The offset value can be varied in the range of “0 to 1020” with the step of 4. Default
value is "40".
It is possible to set the timing of the pulse output signal that is output from the “BNC
connector for pulse output” of the driver circuit.
2
Driver circuits for CCD image sensor
C11287, C11288
Timing chart
C11287
Internal synchronous mode (“INT” mode)
Trigger In (software)
Exposure time
Exposure signal
Line binning
P1V/P2V
Data acquisition time
P1H/P2H/P3H/P4H
A/D conversion
Data transfer time
Data transfer
KACCC0436EA
External synchronous mode 1 (“EXT.EDGE” mode)
Trigger In (from BNC)
Exposure time
Exposure signal
Line binning
P1V/P2V
Dummy scan
*
Data acquisition time
P1H/P2H/P3H/P4H
A/D conversion
Data transfer time
Data transfer
* When an external trigger signal is input, accumulation is started immediately.
KACCC0437EA
External synchronous mode 2 (“EXT.LEVEL” mode)
Trigger In (from BNC)
Exposure time
Exposure signal
Line binning
P1V/P2V
Dummy scan
*
Data acquisition time
P1H/P2H/P3H/P4H
A/D conversion
Data transfer time
Data transfer
* When an external trigger signal is input, accumulation is started immediately.
KACCC0438EA
3
Driver circuits for CCD image sensor
C11287, C11288
C11288
Internal synchronous mode (“INT” mode)
Trigger in (software)
Exposure time
Exposure signal
Line binning
P1V/P2V
Data acquisition time
P1H/P2H/P3H/P4H
A/D conversion
Data transfer time
Data transfer
KACCC0521EA
External synchronous mode 1 (“EXT.EDGE” mode)
Trigger in (from BNC)
Exposure time
Exposure signal
Line binning
Dummy scan
P1V/P2V
Data acquisition time
P1H/P2H/P3H/P4H
A/D conversion
Data transfer time
Data transfer
KACCC0522EB
External synchronous mode 2 (“EXT.LEVEL” mode)
Trigger in (from BNC)
Exposure time
Exposure signal
Line binning
Dummy scan
P1V/P2V
Data acquisition time
P1H/P2H/P3H/P4H
A/D conversion
Data transfer time
Data transfer
KACCC0523EB
4
Driver circuits for CCD image sensor
C11287, C11288
Dimensional outlines (unit: mm)
C11287
45.37
8.77
4.2
35
BNC connector
for pulse output
23
14.35
(4 ×) 3.2
70
5.0
BNC connector
for external trigger input
Image sensor
(optional)
5.0
USB connector
5.0
5.0
3.1
80
1.6
16.5
35
35
CCD image sensor
mount position
29.5
50.5
Index mark
KACCC0232EA
5
Driver circuits for CCD image sensor
C11287, C11288
C11288
45.37
8.77
4.57
35
BNC connector
for pulse output
23
14.35
(4 ×) 3.2
5.0
BNC connector
for external trigger input
Image sensor
(optional)
80
USB connector
5.0
DC jack
5.0
5.0
3.1
80
1.6
13
16.5
35
45
CCD image sensor
mount position
29.5
50.5
Index mark
KACCC0271EA
6
Driver circuits for CCD image sensor
C11287, C11288
Connection examples
Refer to the following diagram to connect hardware peripherals.
C11287
Laser
Mechanical shutter
Pulse generator
USB 2.0
C11287
PC
KACCC0509EA
C11288
Laser
Mechanical shutter
Pulse generator
USB 2.0
DC +5 V
C11288
PC
KACCC0520EA
Accessories
· CD-ROM (includes C11287/C11288 instruction manual, application software, SDK)
· USB cable
· AC adapter (C11288)
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein.
Type numbers of products listed in the specification sheets or supplied as samples may have a suffix “(X)” which means tentative specifications or a suffix “(Z)”
which means developmental specifications. ©2010 Hamamatsu Photonics K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Cat. No. KACC1173E02 Apr. 2010 DN
7