PolySwitch® PTC Devices PRODUCT: TS600-400F Overcurrent Protection Device 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com Raychem Circuit Protection Products DOCUMENT: SCD 26381 PCN: REFER TO TABLE III BELOW REV LETTER: G REV DATE: JUNE 14, 2007 PAGE NO.: 1 OF 1 Specification Status: Released Maximum Operating Voltage: 60 VDC Fault Ratings at 20°C: 250VAC, 3A, 10 applications 600VAC, 60A, 1 application Additional Info at 20°C: • Resistance matched: N/A • Lightning withstand: GR1089 Levels 1 & 2 • Helps equipment meet UL60950 (UL1459) and GR1089 Terminal Material: Tin-Plated Brass Case Material: 1000V Dielectric Rating Marking: TABLE I. DIMENSIONS: A B MIN MAX MIN MAX mm: 18.3 19.4 11.6 12.3 in:* (0.72) (0.77) (0.46) (0.49) *Rounded off approximation C MIN 7.2 (0.29) D MAX 8.3 (0.33) MIN 1.7 (0.07) E MAX 2.4 (0.09) MIN 9.9 (0.39) F MAX 10.4 (0.41) MIN 1.5 (0.06) MAX 2.3 (0.09) TABLE II. PERFORMANCE RATINGS @ 20°C (unless otherwise noted): HOLD CURRENT (A) 0.400 RESISTANCE (Ω) TRIP CURRENT (A) R MIN R Typ 1.000 0.5 1.1 TIME TO TRIP(Sec) @ 3A TYP MAX R1 MAX* 2.0 5.0 OPERATING TEMPERATURE (°C) MIN MAX 14.0 -40 85 TRIPPED POWER DISSIPATION (W) TYP @ 60VDC 2.0 *Maximum device resistance at 20°C measured 1 hour post reflow or post trip. TABLE III. APPLICABLE PART DESCRIPTIONS: PART DESCRIPTION TS600-400F Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: PCN # (INTERNAL USE ONLY) RF0309-000 PACKAGING TYPE Bulk UL (file #E74889), CSA (file #78165) Raychem PS300, GR1089 specifications, UL60950 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant NOTE N/A ELV Compliant © 2007 Tyco Electronics Corporation. All rights reserved. Pb-Free