TVS DIODE ARRAY SPEER ELECTRONICS, INC. 05-00 300 WATT SMD TVS ARRAY FEATURES APPLICATIONS -I/O Transient Protection -JEDEC SO-14 Package / UL 94V-0 -Protects Eight I/O Lines -Low Leakage Current -Low Operating & Clamping Voltages -Solid-State Technology - Working Voltages: 5V, 12V, 15V, and 24V -Cell phone-Handsets & Accessories -Automotive Electronics -Personal Digital Assistants & Pagers -Desktop PC & Servers -Notebook, Laptop & Palmtop Computers -Instrumentation -Peripherals MAXIMUM RATINGS TYPICAL APPLICATION Transient Voltage Rating Clamped Transient Symbol Value Unit Peak Pulse Power (tp=8/20µs) Ppk 300 Watts EDS Voltage (HBMperIEC1000-4-2) Vpp >25kV kV Lead Soldering Temperature TL 260(10sec.) oC Operating Temperature TJ -55 to +125 o TSTG -55 to +150 oC TVS Transient Current Protected Load Storage Temperature C Transient current is diverted to ground through TVS: The voltage seen by the protected load is limited to the clamping voltage level of the TVS. CIRCUIT PACKAGE LAYOUT 7&8 1 & 14 2 3 12 13 5 6 9 10 14 8 1 7 ORDERING & SPECIFYING INFORMATION* TVS 001 B 12 Design PACKAGING VOLTAGE 001 TE: 13" Reel Embossed Plastic 05V 12V 15V 24V *Please Note: KSE's Part Numbers Do Not Contain any Spaces or Hyphens. NOTICE: The information contained on this data sheet is believed to be accurate and up to date. KOA Speer Electronics reserves the right to change these specifications without notice. Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA WWW.KOASPEER.COM 814-362-5536 page 1 Fax 814-362-8883 TVS DIODE ARRAY SPEER ELECTRONICS, INC. ELECTRICAL CHARACTERISTICS TVS001B05 Parameter Symbol Reverse Stand-off Voltage Breakdown Voltage Condition Min Typ. VRWM VBR IT=1mA Max. Units 5 V 6 V o Reverse Leakage Current IR VRWM =5V,T=25 C 20 µA Clamping Voltage VC Ipp=1A,tp=8/20µs 9.8 V Max Peak Pulse Current IPP Tp=8/20µs 17 A Junction Capacitance Cj BetweenI/Opinsand Gnd VR=0V,f=1MHZ 350 pF TVS001B12 Parameter Symbol Reverse Stand-off Voltage VRWM Reverse Beakdown Voltage VBR Reverse Leakage Current IR Clamping Voltage VC Max Peak Pulse Current Junction Capacitance Condition Min IT=1mA VRWM Typ. Max. Units 12 V 13.3 V =12V,T=25oC 1 µA Ipp=1A,tp=8/20µs 19 V Ipp Tp=8/20µs 12 A Cj BetweenI/Opinsand Gnd VR=0V,f=1MHZ Symbol Condition 120 pF TVS001B15 Parameter Reverse Stand-off Voltage VRWM Reverse Beakdown Voltage VBR Min IT=1mA Typ. Max. Units 15 V 16.7 V o Reverse Leakage Current IR VRWM =15V,T=25 C 1 µA Clamping Voltage VC Ipp=1A,tp=8/20µs 24 V Max Peak Pulse Current Ipp Tp=8/20µs 10 A Junction Capacitance Cj BetweenI/Opinsand Gnd VR=0V,f=1MHZ Symbol Condition 75 pF TVS001B24 Parameter Reverse Stand-off Voltage VRWM Reverse Beakdown Voltage VBR Min IT=1mA Typ. Max. Units 24 V 26.7 V o Reverse Leakage Current IR VRWM =24V,T=25 C 1 µA Clamping Voltage VC Ipp=1A,tp=8/20µs 40 V Max Peak Pulse Current Ipp Tp=8/20µs 5 A Junction Capacitance Cj BetweenI/Opinsand Gnd VR=0V,f=1MHZ 50 pF *Please Note: KSE's Part Numbers Do Not Contain any Spaces or Hyphens. NOTICE: The information contained on this data sheet is believed to be accurate and up to date. KOA Speer Electronics reserves the right to change these specifiactions without notice. Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA WWW.KOASPEER.COM 814-362-5536 page 2 814-362-8883 TVS DIODE ARRAY SPEER ELECTRONICS, INC. DIMENSIONS A in (mm) A B C B C D E D E F F 10o Typ G H Min. Max. .337 (8.56) .150 (3.81) .228 (5.79) .344 (8.74) .158 (4.01) .244 (6.20) .013 (.33) .050 (1.27) .004 (.102) .007 (.178) .053 (1.34) 0.020 (.51) BSC BSC .010 (.254) .010 (254) .069 (1.75) H G X LAND PATTERN A .190 5.00 B 0.5 1.27 X .025 .070 Y .090 2.40 + + + + mm. B Ref + In. Y + + + + + + + + A (Ref) + Dimensions *Please Note: KSE's Part Numbers Do Not Contain any Spaces or Hyphens. NOTICE: The information contained on this data sheet is believed to be accurate and up to date. KOA Speer Electronics reserves the right to change these specifiactions without notice. Bolivar Drive P.O. Box 547 Bradford, PA 16701 USA WWW.KOASPEER.COM 814-362-5536 page 2 814-362-8883